producten - HANDELSONDERNEMING NEESKENS B.V.

Infinity AMPRF6001A

600W RMS AMPLIFIER

Discover the power of sound with the Infinity 600W RMS car amplifier. This groundbreaking Class D amplifier takes your audio experience to a whole new level. With a power output of 600 watts RMS, this amplifier delivers dynamic sound that brings every note to life, whether you're into rock, pop, hip-hop, or classical music.

The Infinity car amplifier is designed with precision and craftsmanship, resulting in unparalleled sound quality. Thanks to the variable low-pass filter, you can fine-tune the low frequencies to your personal preference and find the perfect balance between clarity and depth. This ensures that every bassline and beat sounds crystal clear and tight, providing you with an immersive listening experience.

With the variable bass boost feature, you have full control over the low tones. Whether you want a subtle bass for a relaxed ride or a powerful bass that makes your windows shake, this amplifier can handle it all. Easily adjust the bass boost to your taste and enjoy deep, rich bass reproduction that will get your heart pounding.

In addition to delivering impressive sound, the Infinity car amplifier also offers a stylish and compact design that seamlessly fits into any vehicle. The amplifier is built with durability in mind, making it resistant to the challenges of daily use on the road.

With the Infinity 600W RMS car amplifier, you'll enjoy a sonic powerhouse that transforms every ride into a concert on wheels. Experience the perfect combination of power, control, and sound quality. Upgrade your audio system today and let your music come to life with the Infinity car amplifier.

General Specifications
350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
Class D amp technology
variable low-pass filter (32-320 Hz, 12 dB/octave)
variable bass boost (0-12 dB at 45Hz)
phase switch (0, 180 degrees)
preamp and speaker-level inputs
fuse rating30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=220mm x 55.5mm x 180mm WxHxD=8-11/16” x 2-3/16" x7-1/8”
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=360mm x 55.5mm x 180mm WxHxD=14-3/16” x 2-3/16" x7-1/8”
600w RMS / 1200W MAX

Retail: € 299,95

Infinity AMP3004A

4x75, 4x100 or 2x200W AMPLIFIER

Discover the power of sound with the Inifity car amplifier. This groundbreaking Class D amplifier takes your audio experience to a whole new level. With a power output of 4x75 or 2x200 watts RMS, this amplifier delivers dynamic sound that brings every note to life, whether you're into rock, pop, hip-hop, or classical music.

The Inifity car amplifier is designed with precision and craftsmanship, resulting in unparalleled sound quality. The variable low-pass filter allows you to fine-tune the low frequencies to your personal preference and find the perfect balance between clarity and depth. This ensures that every bassline and beat sounds crystal clear and tight, providing you with an immersive listening experience.

With the variable bass boost feature, you have full control over the low-end frequencies. Whether you want a subtle bass for a relaxed drive or a powerful bass that rattles the windows, this amplifier can handle it all. Simply adjust the bass boost to your taste and enjoy deep, rich bass reproduction that gets your heart racing.

In addition to delivering impressive sound, the Inifity car amplifier also offers a stylish and compact design that seamlessly fits into any vehicle. The amplifier is built with durability in mind, making it resistant to the challenges of daily road use.

With the Inifity car amplifier, you'll enjoy a sonic powerhouse that transforms every journey into a concert on wheels. Experience the perfect combination of power, control, and sound quality. Upgrade your audio system today and let your music come to life with the Inifity car amplifier.

General Specifications
75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
Preamp and speaker-level inputs
Preamp outputs
Fuse rating30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=320mm x 55.5mm x 180mm WxHxD=12-5/8” x 2-3/16" x 7-1/8”

Retail: € 299,95

SONY XM-5ES

Superior sound and versatility
The XM-5ES Mobile ES™ 5-channel amplifier takes the audio in your car to the next level. Designed with ultimate precision: Enjoy every detail of the music thanks to an improved frequency response and 4 x 100 W (2 x 330 W bridged) + 1 x 450 W RMS. The new signal summing function and combined pre-outs ensure seamless installation in different types of vehicles.

4 x 100 W + 1 x 450 W RMS power output
Enjoy dynamic sound with a 4 x 100 W (2 x 330 W bridged) + 1 x 450 W RMS power output at 4 ohms / 4 x 165 W + 1 x 750 W RMS output power at 2 ohms. The highly efficient Class-D amplifier amplifies the music in your car and offers various speaker configurations.

Music as the artist intended
Hi-Res Audio lets you hear the finest nuances in studio-quality sound that CDs can't match. Experience the music as if the artist were right in front of you. The XM-5ES 5-channel amplifier enhances any track, including hi-res audio files.

Premium circuit components combine to deliver ultimate efficiency and perfect sound reproduction, giving every ride the soundtrack it deserves.

Optimized Power Blocks
The power block is designed to transfer electricity very efficiently with virtually no noise, and the DC converter with a toroidal transformer reduces electromagnetic interference. To deliver refined ultra-high-frequency sound, each channel block and Class-D amplification are isolated and have their own grounding circuit, minimizing signal interference.

Exclusive components for superior sound
The upgraded coils with OFC wires were chosen for their lower internal resistance and improved character of the sound, while the high-capacity electrolytic capacitors contribute to an accurate and responsive bass.

Robust technology
The 1.2 mm thick bottom plate and the new design with crossbars provide a chassis with about 50% more rigidity. This reduces resonance and shifts the resonance peak out of the harsh vibration frequency band of the vehicle, while greatly improving damping performance.

Improved logical operation and connection placement
The controls for adjustments and the connections have been placed in logical positions for easy operation and ease of use. The well-thought-out layout ensures intuitive operation and easy installation.

High quality speaker terminal
The speaker terminal features hex head screws for a robust tightening method for the wire connections and also accepts bare wire or ferrules (up to AWG 8) for superior electrical performance, sound of high quality and secure connection.

Signal summing for seamless connection to factory audio
The new signal summing function combines filtered audio signals from modern automotive audio systems, such as those for the separate tweeter, woofer and subwoofer, to easily and accurately reproduce the entire stereo frequency range. strengthen. You can even send the consolidated line-level signal to other mono or stereo amplifiers in the chain for flexible installation in a variety of vehicle types and audio system setups.

Dimensions and weight
DIMENSIONS (W X H X D)
380mm x 60mm x 215mm
Amplifier
CHANNEL CONFIGURATION
4-channel/3-channel/2-channel/1-channel (Mono)
HIGH PASS FILTER
Variable (500–5 kHz)
HIGH PASS FILTER GRADE
12 dB/oct
LOW PASS FILTER
Variable (50–500 Hz)
LOW PASS FILTER GRADE
12 dB/oct + 24 dB/oct
CTA rated power output
4 OHM
4 x 100 W, 1 x 450 W
Rated power output (14.4 V )
4 OHM
4 x 100 W + 1 x 450 W at 1 kHz, 1% THD
4 OHM — BTL (BRIDGE-TIED LOAD)
2 x 330 W BTL + 1 x 450 W at 1 kHz, 1% THD
2 OHM
4 x 165 W + 1 x 750 W at 1 kHz , 1% THD
General Features
FREQUENCY RESPONSE
10 Hz–40 kHz / 10–500 Hz
TOLERANCE
+0.5 / -3 dB
TOTAL HARM. DISTORTION AT 1 KHZ (%)
Less than 0.05%
Details
CTA OUTPUT POWER
4 x 100W + 1 x 450W
MOSFET
Yes (power supply)
SUBSONIC HIGH PASS FILTER
Yes

Retail: € 999,00

SONY SONY XM-1ES

Mobile ES™ 1-channel amplifier

1 x 600 W RMS power output
Enjoy dynamic sound with a 1 x 600 W RMS power output at 4 ohms / 1 x 1000 W RMS output power into 2 ohms. The highly efficient Class D amplifier amplifies the music in your car and provides strong and clean lows in your favorite songs.

Powerful sound with stunning clarity
Sony's expertise and years of experience in sound engineering with digital amplifiers have allowed it to develop a compact and powerful amplifier without compromising on sound quality.

Optimized power blocks
The power block is designed in such a way that the electricity is transferred very efficiently and with virtually no noise, for powerful and clean bass. The DC converter with a toroidal transformer reduces electromagnetic interference.

Exclusive components for superior sound
The improved coils with OFC wires were chosen for their lower internal resistance and the improved character of the sound, while the high-capacity electrolytic capacitors contribute to an accurate and responsive bass.

Robust engineering
The bottom plate with a thickness of 1.2 mm and the new cross-member design provide a chassis with approximately 50% more rigidity. This reduces resonance and shifts the resonance peak out of the harsh vibration frequency band of the vehicle, while greatly improving damping performance.

Improved logic control and connection placement
Controls for adjustments and connections are placed in logical positions for easy operation and ease of use. The well-thought-out layout ensures intuitive operation and easy installation.

High-quality speaker connection
The speaker connection is equipped with hex screws for a robust fastening method for the wire connections and also accepts bare wire or ferrules (up to AWG 8) for superior electrical performance, high quality sound and secure connection.

Clear labels and ratings
The redesigned control panel features logical placements with easy-to-understand relationships, and updated graphics.

Signal sum for seamless connection to factory audio
The new signal sum function combines filtered audio signals from modern automotive audio systems, such as those for the separate tweeter, woofer, and subwoofer, to easily and accurately amplify the entire stereo frequency range. You can even send the consolidated line-level signal to other mono or stereo amplifiers in the chain for flexible installation in different types of vehicles and audio system setups.

Dimensions and weight
DIMENSIONS (W X H X D)
270mm x 60mm x 215mm
WEIGHT
2.9kg

Amplifier
CHANNEL CONFIGURATION
1-channel (Mono)
LOW PASS FILTER
Variable (50–500 Hz)
LOW PASS FILTER GRADE
24 dB/oct

CTA rated output power
4 OHM
1 x 600 W

Rated output power (14.4 V)
4 OHM
1 x 600 W @ 100 Hz, 1% THD
2 OHM
1 x 1000 W @ 100 Hz, 1% THD

Maximum output power
MAX. CHANNEL POWER CONFIGURATION AT 2 OHM
1550 W
MAX. CHANNEL OUTPUT POWER CONFIGURATION AT 4 OHM
1000 W

General Features
FREQUENCY RESPONSE
10–500 Hz
TOLERANCE
+0.5 / -3 dB
TOTAL HARM. DISTORTION AT 1 KHZ (%)
Less than 0.05%

Details
CTA OUTPUT POWER
1 x 600 W
MOSFET
Yes (power supply)
SUBSONIC HIGH PASS FILTER
Yes
SPEAKER INPUT LEVEL
Yes
GOLD PLATED CONNECTORS
Yes

Retail: € 599,00

SONY XM-4ES

Mobile ES™ 4-channel amplifier

4 x 100 W RMS output power
Enjoy dynamic sound with a 4 x 100 W (2 x 330 W bridged) RMS output power at 4 ohms / 4 x 165 W RMS-RMS power output at 2 ohms. The highly efficient Class-D amplifier offers various speaker configurations for any car and is sure to impress any audio enthusiast.

Music as the artist intended
High-Resolution Audio lets you hear the finest nuances in studio-quality sound that CDs can't match. Experience the music as if the artist were right in front of you. The XM-4ES 4-channel amplifier enhances every track, including High-Resolution Audio files. Premium circuit components work together to deliver ultimate efficiency and perfect sound reproduction, so every ride gets the soundtrack it

Powerful sound with stunning clarity
Thanks to Sony's expertise and years of experience in sound engineering with digital amplifiers, a compact and powerful amplifier could be developed without compromising on sound quality.

Optimized power blocks
The power block is designed in such a way that electricity is transferred very efficiently with virtually no noise, and the DC converter with a toroidal transformer ensures less electromagnetic interference. To deliver refined, ultra-high-frequency sound, each channel block and Class-D amplification are isolated and have their own grounding circuit to minimize signal interference.

Exclusive components for superior sound
The upgraded coils with OFC wires were chosen for lower internal resistance and improved character of the sound, while the high-capacity electrolytic capacitors contribute to accurate and responsive bass.

Robust technology
The 1.2 mm thick bottom plate and the new design with crossbars provide a chassis with approximately 50% more rigidity. This reduces resonance and shifts the resonance peak out of the harsh vibration frequency band of the vehicle, while greatly improving damping performance.

Improved logic control and connection placement
Controls for adjustments and connections are placed in logical positions for easy operation and ease of use. The well-thought-out layout ensures intuitive operation and easy installation.

High-quality speaker connection
The speaker connection is equipped with hex screws for a robust fastening method for the wire connections and also accepts bare wire or ferrules (up to AWG 8) for superior electrical performance, high quality sound and secure connection.

Clear labels and ratings
The redesigned control panel features logical placements with easy-to-understand relationships, and updated graphics.

Signal sum for seamless connection to factory audio
The new signal sum function combines filtered audio signals from modern automotive audio systems, such as those for the separate tweeter, woofer, and subwoofer, to easily and accurately amplify the entire stereo frequency range. You can even send the consolidated line-level signal to other mono or stereo amplifiers in the chain for flexible installation in different types of vehicles and audio system setups.

Dimensions and weight
DIMENSIONS (W X H X D)
270mm x 60mm x 215mm
WEIGHT
2.9kg

Amplifier
CHANNEL CONFIGURATION
4-channel/3-channel/2-channel
HIGH PASS FILTER
Variable (500–5 kHz)
HIGH PASS FILTER GRADE
12 dB /oct
LOW PASS FILTER
Variable (50–500 Hz)
LOW PASS FILTER GRADE
12 dB/oct + 24 dB/oct

CTA rated output power
4 OHM
4 x 100 W

Rated output power (14.4 V)
4 OHM
4 x 100 W at 1 kHz, 1% THD
4 OHM — BTL (BRIDGE-TIED LOAD)
2 x 330W BTL @ 1kHz, 1% THD
2 OHM
4 x 165W @ 1kHz, 1% THD

General Features
FREQUENCY RESPONSE
10 Hz – 40 kHz
TOLERANCE
+0.5 / -3 dB
TOTAL HARM. DISTORTION AT 1 KHZ (%)
Less than 0.05%

Details
CTA OUTPUT POWER
4 x 100 W
MOSFET
Yes (power supply)
SPEAKER INPUT LEVEL
Yes
GOLD PLATED CONNECTORS
Yes

Retail: € 599,00

JBL Concert A704

4 channel 70W RMS Amplifier

Powerful Class AB amplifier
Class AB amplifier output stage combines the advantages of the Class A amplifier and the Class B amplifier while minimizing the problems of low efficiency and distortion associated with them.

Adjustable High-Pass/Low-Pass Crossover Filter
Concert amplifiers have the High-Pass Filter (HPF) and the Low-Pass Filter (LPF), which allow you to adjust the frequency from 40Hz to 400Hz based on your own music taste to deliver the appropriate musical frequencies to speakers.

Auto Turn On Facility
When using the High-level signal inputs, the amplifier automatically turns on once a DC offset is detected (>2.5 volts). When using the Line-level signal inputs, the amplifier will also turn on once a +12V signal is detected from the remote turn-on wire.

Efficient Cooling Design
High performance amplifiers are not only powerful but also compact which depend on overall Efficient Cooling Design.

Concert Sound and Elegant Look
JBL Concert amplifiers deliver extraordinary sound experience with elegant industry design.

Reliable Performance
In order to deliver high quality sound and reliable performance, the high quality component such as audio capacitors, power MOSFET are selected for Concert amplifiers. Those amplifiers also have to undergo a rigid testing process that would destroy unstable amplifiers.
JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives
them at full power for days at a time.

- 4-Channel Class AB Car Amplifier
- Rated Power RMS Output:
- 70W x 4 @ 4 ohm; 90W x 4 @ 2 ohm; 180W x 2 @ 4 ohm bridged, <1%THD
- Full/High-Pass/Low-Pass Filter:
- 40-400Hz, 12dB/octave
- SN Ratio (1W @ 4 ohms): >75dB
- Frequency Response (-3dB):10Hz – 45kHz
- Gross weight: 2.86kg

Retail: € 199,50

JBL Concert A652

2 channel 65W RMS Amplifier


Powerful Class AB amplifier
Class AB amplifier output stage combines the advantages of the Class A amplifier and the Class B amplifier while minimizing the problems of low efficiency and distortion associated with them.

Adjustable High-Pass/Low-Pass Crossover Filter
Concert amplifiers have the High-Pass Filter (HPF) and the Low-Pass Filter (LPF), which allow you to adjust the frequency from 40Hz to 400Hz based on your own music taste to deliver the appropriate musical frequencies to speakers.

Auto Turn On Facility
When using the High-level signal inputs, the amplifier automatically turns on once a DC offset is detected (>2.5 volts). When using the Line-level signal inputs, the amplifier will also turn on once a +12V signal is detected from the remote turn-on wire.

Efficient Cooling Design
High performance amplifiers are not only powerful but also compact which depend on overall Efficient Cooling Design.

Concert Sound and Elegant Look
JBL Concert amplifiers deliver extraordinary sound experience with elegant industry design.

Reliable Performance
In order to deliver high quality sound and reliable performance, the high quality component such as audio capacitors, power MOSFET are selected for Concert amplifiers. Those amplifiers also have to undergo a rigid testing process that would destroy unstable amplifiers.
JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives
them at full power for days at a time.

- 2-Channel Class AB Car Amplifier
- Rated Power RMS Output:
- 65W x 2 @ 4 ohm; 85W x 2 @ 2 ohm; 170W x 1@ 4 ohm bridged, <1%THD
- Full/High-pass/Low-pass Filter:
- 40-400Hz,12dB/octave
- SN Ratio (1W @ 4 ohms): >75dB
- Frequency Response (-3dB): 10Hz – 45kHz
- Gross weight: 2.15kg

Retail: € 129,50

SONY XM-S400D

4 Channel Class D Amplifier

Product highlights
- Class-D amplification technology for high power
- 100 W x 4 maximum power output
- Low and high pass filters for accurate sound
- Speaker level inputs with power sensing for simple installation
- Overload protection circuit and speaker level input

Amplifier
Channel Configuration 4ch
High Pass Filter 120 Hz
High-Pass Filter Slope 12 dB/oct
Low Pass Filter 120 Hz
Low-Pass Filter Slope12 dB/oct

Details
CTA Power output 45 W x 4
CTA SN Ratio 83 dBA
Current drain (A) - rated output power at 4 ohm 15 A
Line In: Input Sensitivity 1 V and 8 V

General Features
Frequency Response 20-20 kHz
Signal to Noise Ratio 100 dB
Tolerance +0.5/-3 dB
Total Harmonic Distortion at 1 kHz (%) 0.08%
Maximum Output Power (1 kHz) Max. Channel Power Configuration at 4 ohm

Retail: € 180,00

SONY XM-N502

Amplifier

High temperatures can have such a negative effect on the components of the amplifier that the amplifier is often turned off until the temperature has dropped sufficiently. Automatic Thermal Control lowers the amplifier's output so you don't have to worry about the amplifier suddenly cutting out.

The amplifier's design maximizes air circulation inside the unit, keeping it cool while producing a stable, powerful sound that won't be distorted.

The powerful stereo amplifier uses high-quality capacitors, power transistors and chokes to ensure authentic and reliable sound reproduction.

The music just sounds better when the right frequencies are routed to the right parts of your speakers. The built-in LPF ensures that only deep bass sounds are routed to the subwoofer.

- Impedance 4
- Stable up to impedance 2 Ω
- Frequency range 5 000- 50 000 Hz
- Total power (music) 500 W
- Power per channel (music) 150 W
- Power per channel (RMS) 65 W
- Color (specific) Black
- Width 321 mm
- Height 55 mm
- Weight 1.5 kg
- Dim. (w x h) 321mm x 55mm
- Channels 2 channel

Retail: € 95,00

SONY Sony XM-N1004

4-channel stereo amplifier

Let the music through your speakers really come into its own with this powerful Sony amplifier. The Sony XM-N1004 has a power of 1000 Watt, so you can enjoy your favorite music in a powerful sound experience.

Stays cool during use
Some amps shut down when they get too hot, but Automatic Thermal Control lowers the amp's output so you can keep listening as the air circulates.

Separate the high and low tones
High/Low Pass filters direct frequencies to the appropriate speakers.

Solidly built
All parts are selected for high quality and reliable sound.

Flexible installation
Thanks to one-sided connections, you have multiple mounting options.

- Dim. (w x h x d): 384 x 55 x 252 mm.
- Impedance 4
- Stable up to impedance 2 Ω
- Frequency range 5-50
- Color (specific) Black
- Width 384 mm
- Height 55 mm
- Weight 2.7 kg
- Dim. (w x h) 384mm x 55mm
- Music power (max.) 1000 W
- Type 4 channel

Retail: € 110,00

JBL DSP4086

Digital Signal
Processor Amplifier

JBL DSP Amplifier is an audio processor for fine-tuning of aftermarket audio systems.
It is a self-contained audio system with 6-channel audio inputs, 8-channel powered audio
outputs, an easy to use tuning interface a novice can understand and detailed tuning
capabilities to satisfy even experienced installers. With a USB connection to access
the tuning interface using a Windows PC, you can control fully variable crossovers,
selectable 0-to-48dB slopes, time delay, 31-band parametric or graphic EQ adjustment,
assignable input to output mixer with input channel summing, channel gain, master
volume control, clipping indicator to ensure the audio output is not distorted and ability
to save up to 10 presets.

Retail: € 449,50

PIONEER

Retail: € 169,00

JBL Club A754

4 x 100
Watts RMS

High performance 4 channel car amplifier

Value engineered car amplifier with JBL power and performance.
The Club A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your car. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.

Features
Compact size
High and low level input
Variable crossover
Low noise and distortion
Input Level Control
Full on-board protection
Preamp Outputs
Class H amp technology
Turn-on mode

Retail: € 269,50

JBL Club A600

MONO
600 WATTS RMS

Value engineered car amplifier with JBL power and performance.
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

Features
Compact size
High and low level input
Variable crossover and bass boost
Low noise and distortion
Input Level Control
Full on-board protection
Phase Switch
RBC wired remote

Retail: € 259,50

JBL Club A5055

5-Channel
Amplifier

Value engineered car amplifier with JBL power and performance.
The Club A5055 5-channel amplifier delivers a powerful 50-Watts RMS to each of the front and rear speakers in your car, and a pounding 500-Watts RMS to the subwoofer channel — a much smarter ratio of subwoofer-to-full-range power than what is typical in 5-channel amps. You can also bridge the amp to 3-channel mode to deliver 140-Watts RMS to your front speakers while driving your sub with 500-Watts RMS. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance.

Features
Compact size
High and low level input
Variable crossover and bass boost
Low noise and distortion
Input Level Control
Full on-board protection
Phase Switch
RBC wired remote
Class AB+D amp technology
Turn-on mode

Retail: € 369,50

JBL Club A1000

MONO
600 WATT RMS

High performance mono subwoofer car amplifier

Value engineered car amplifier with JBL power and performance.
The JBL Club A1000 mono subwoofer amplifier delivers 1000-Watts RMS using a
Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

Features
Compact size
High and low level input
Variable crossover and bass boost
Low noise and distortion
Input Level Control
Full on-board protection
Phase Switch
RBC wired remote
Strappable for up to 2,000 watts of power at 4 ohms
Class D amp technology
Turn-on mode

Retail: € 389,50

JBL Club A1KW

1 Channel Mono Amplifier
1000 Watts 

Power you will feel at your core.JBL’s new Club 1KW Amplifier is a 1000 watt subwoofer powerhouse that delivers a flawless performance and will shake your soul. Leveraging an ultra-efficient Class D topology all this horsepower is delivered while drawing less current and staying cool. It comes equipped with an onboard 2nd order low-pass crossover as well as a variable Bass EQ (0-9 dB at 45Hz). An included wired remote bass level control can be mounted for convenient volume adjustment from the driver’s seat. Get ready to show and shine, but don’t scare the neighbors.

Technical Specifications:
Power Output @ 2 ohms: 1000W @ 2 ohms
Power Output @ 4 ohms: falls out of 2 ohms
THD @ ROP: 1.0%
S/N: 75dB at 1W
Frequency Response: 10 – 320Hz ± 3dB
Input Sensitivity:
Low Level Input: 0.2 – 2V
High Level Input: 1 – 10V
HPF: n/a
LPF: 32 – 320 (12dB/oct)
Bass EQ: 0 – 12dB var @ 45Hz
Protection: DC, OTP, UVP, OVP, OCP

Retail: € 199,00

JBL Stage A9004

4 Channel Amplifier
880 Watts

Power you will feel at your core.JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms 90W
RMS power @ 2 ohms 110W
RMS bridged power @ 4 ohms 220WTotal peak power 880W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2 x 20A
Dimensions (H x W x L) 50 x 145 x 268.6mm
Weight 1.806kg

Retail: € 189,50

PIONEER GM-DX874

4/3/2 Channels
Versterker

4-Channel high resolution Class-FD Amplifier 1200W, High quality sound components

Retail: € 259,00

JBL Stage A6004

4 Channel Amplifier
560 Watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 560W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio(reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.2A
Fuse size 2 x 15A
Dimensions (H x W x L) 50 x 145 x 193.6mm
Weight 1.381kg

Retail: € 169,50

JBL Stage A6002

2 Channel amplifier
280 Watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 280W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio(reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.0A
Fuse size 20A
Dimensions (H x W x L) 50 x 145 x 156.6mm
Weight 1.16kg

Retail: € 139,50

JBL Stage A3001

1 Channel Mono Amplifier
600 Watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms N/A
RMS power @ 2 ohms 300W
RMS bridged power @ 4 ohms N/A
Total peak power 600W
Frequency response 10Hz – 320Hz @ -3dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2 x 15A
Dimensions (H x W x L) 50 x 145 x 241.6mm
Weight 1.609kg

Retail: € 169,50

PIONEER TS-WX130DA

Ruimtebesparende actieve subwoofer met ingebouwde versterker van klasse D die gebruik maakt van DIGITAL BASS CONTROL voor DEEP en DYNAMIC geregelde bas. Eenvoudig te installeren dankzij zijn kleine afmetingen. (160 W)

Krachtige bas, zonder ruimteverlies.

Pioneer lanceert een nieuw product in zijn generatie van versterkte subwoofers van klasse D, met geïntegreerde DIGITAL BASS CONTROL Deze unieke functie genereert twee selecteerbare basmodi: DEEP en DYNAMIC, waarbij 160 Watt krachtige, rijke, diepe bas wordt geproduceerd die je kunt voelen, zonder ruimte te verliezen. Gebruikers kunnen rechtstreeks via de bijgeleverde bedrade afstandsbediening de twee basmodi gemakkelijk regelen en aanpassen en u kunt de TS-WX130DA gemakkelijk monteren onder de voorstoelen of in de koffer.

Dankzij het gebruik van klasse D-technologie, is de Pioneer TS-WX130DA nog gemakkelijker te installeren, aangezien deze zowel hoge (Luidspreker-lijningang) als lage (RCA-lijningang) ingangssignalen kan verwerken, waardoor u deze kunt aansluiten op uw achteraf geplaatste of originele stereo-installatie, zodat u uw huidige geluid gemakkelijk kunt upgraden.

TS-WX130DA is een kleine actieve subwoofer in een afgesloten behuizing die 160 W maximumvermogen en 50 W nominaal vermogen levert.

Retail: € 199,00

EXCALIBUR x600.4

2400 WATTS - 4 Channel MOSFET Power Amplifier
NEW EXCALIBUR SERIES

SLIM SILVER - BRUSHED METAL
POWER IN STYLE
- 2400 Watts max output power
- High efficiency mosfet power supply
- Variable low & high pass crossover
- Tri-mode output configurations
- 2 Ohm stable circuits
- Thermal/short-circuit/overloading protection

Retail: € 99,00

EXCALIBUR X600.2

1200 WATTS - 2 Channel MOSFET Power Amplifier

NEW EXCALIBUR SERIES

SLIM SILVER - BRUSHED METAL
POWER IN STYLE

- 1200 Watts max output power
- High efficiency mosfet power supply
- Variable low & high pass crossover
- Tri-mode output configurations
- 2 Ohm stable circuits
- Thermal/short-circuit/overloading protection

Retail: € 89,00

JBL Club 4505

5 Channel Amplifier
1800 Watts

Authentic JBL Power and Performance.New high-performance JBL Club ampliiers deliver world-class JBL power from a compact chassis built to it in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high- and low-level inputs that let them integrate with most car stereos. They’re also compatible with several vehicle technologies, including many advanced driver assistance systems, and the Harman HALOsonic system, a suite of acoustic solutions that can simulate engine sounds for a better driving experience in hybrids and electric cars, cancel road noise for better-sounding music, and more.

High-performance 5-channel car amplifier
Compact design to fit in more vehicles
High- and low-level inputs to work with virtually any stereo
Variable crossovers and bass boost
Compatibility with advanced vehicle technology
Max Power: 1800W Peak
Full Range Channels
Power Output, 2Ω: 65Wrms x 4, <1.0% THD+N
Power Output, 4Ω: 45Wrms x 4, <1.0% THD+N
Power Output, 4Ω Bridged: 130Wrms x 2, <1.0% THD+N
Signal-to-Noise Ratio: ≥85dB (ref 1W output @ 4Ω)

Subwoofer Channel
Power Output, 2Ω: 500Wrms x 1, <1.0% THD+N
Power Output, 4Ω: 320Wrms x 1, <1.0% THD+N
Signal-to-Noise Ratio: ≥80dB (ref 1W output @ 2Ω)

Retail: € 299,00

JBL Club 5501

1 Channel Mono Amplifier
1300 Watts

Authentic JBL Power and Performance.New high-performance JBL Club ampliiers deliver world-class JBL power from a compact chassis built to it in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high- and low-level inputs that let them integrate with most car stereos. They’re also compatible with several vehicle technologies, including many advanced driver assistance systems, and the Harman HALOsonic system, a suite of acoustic solutions that can simulate engine sounds for a better driving experience in hybrids and electric cars, cancel road noise for better-sounding music, and more.

High-performance mono car amplifier
Compact design to fit in more vehicles
High- and low-level inputs to work with virtually any stereo
Variable crossovers and bass boost
Max Power: 1300W Peak
Power Output, 2Ω: 550Wrms x 1, <1.0% THD+N
Power Output, 4Ω: 370Wrms x 1, <1.0% THD+N
Signal-to-Noise Ratio: ≥80dB (ref 1W output @ 2Ω)

Retail: € 199,00

JBL Club 704

4 Channel High perfomance amplifier
1000 Watt

Authentic JBL Power and Performance.New high-performance JBL Club ampliiers deliver world-class JBL power from a compact chassis built to it in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high- and low-level inputs that let them integrate with most car stereos. They’re also compatible with several vehicle technologies, including many advanced driver assistance systems, and the Harman HALOsonic system, a suite of acoustic solutions that can simulate engine sounds for a better driving experience in hybrids and electric cars, cancel road noise for better-sounding music, and more.

High-performance 4-channel car amplifier
Compact design to fit in more vehicles
High- and low-level inputs to work with virtually any stereo
Variable crossovers
Compatibility with advanced vehicle technologies
Max Power: 1000W Peak
Power Output, 2Ω: 100Wrms x 4, <1.0% THD+N
Power Output, 4Ω: 70Wrms x 4, <1.0% THD+N Power Output, 4Ω Bridged: 200Wrms x 2, <1.0% THD+N
Signal-to-Noise Ratio: ≥85dB (ref 1W output @ 4Ω)

Retail: € 229,00

PIONEER TS-WX130EA

Actieve underseat

Na de bestsellers TS-WX120A en TS-WX110A is nu de nieuwe, verbeterde,TS-WX130EA

Ruimtebesparende actieve subwoofer met ingebouwde versterker van klasse D. Eenvoudig te installeren dankzij zijn kleine afmetingen. (160 W)

Grootte 20 cm
Maximaal opgenomen vermogen 160 W
nominaal ingangsvermogen 50 W
Frequentierespons 40 - 200 Hz
Gevoeligheid 98 dB
Impedantie 1 Ω
Woofermateriaal Aluminium
Type stemspoel Ronde koperen draad met vier lagen
Stemspoel bobijntype Glazen Stemspoel
Laagste resonantiefrequentie (Hz) 32 Hz
Magneten Strontium
Gewicht 3.2 kg
Abmessungen (B x H x T) 280 x 200 x 70

Retail: € 219,00

PIONEER GM-A6704

4-Channel Bridgeable
Amplifier (1000W)

Versterk je audio-ervaring.
Geef toe aan je diepste verlangen naar echte power. Kies zelf hoe je alles uitwerkt dankzij de overbrugbare versterkers. Maar denk wel aan de gevolgen van wat je doet: voortaan krijg je enkel nog zuivere, heldere audiokracht zonder vervorming.

De GM-A6704 zet je systeem in vuur en vlam, maar zonder zelf te oververhitten. Deze versterkers zijn technologische pareltjes. Voel jij het al kriebelen?

4-kanaals
combineer verbluffende kracht met een groots geluid voor een luide, heldere en ruisvrije muziekervaring

Variabele HPF
pas je high-pass filterfrequentie aan voor een betere flexibiliteit van je audiosysteem

Variabele LPF
pas je low-pass filterfrequentie aan voor een betere flexibiliteit van je audiosysteem

Retail: € 279,00

PIONEER GM-A5702

2-kanaals overbrugbare
versterker (1000 W)

Stel de perfecte geluidsinstallatie samen.
De krachtige GM-A5702 werd ontworpen om de audio-ervaring in je auto naar een hoger niveau te tillen. Hij biedt je een totale installatievrijheid en geeft geen vervorming. Met een koellichaam uit één stuk en een versterkingsfactor tot 6,5 dB krijg je in je auto de geluidsomgeving die je altijd al wilde.

De GM-A5702 biedt ondersteuning voor luidsprekers van 2 en 4 ohm, en produceert een enorm vermogen van 1000 W.

Variabele LPF
pas je low-pass filterfrequentie aan voor een betere flexibiliteit van je audiosysteem

Retail: € 249,00

PIONEER GM-A4704

Overbrugbare versterker
met 4 kanalen (520 W)

Klein maar dapper.
De GM-A4704-versterker combineert een prachtig ontwerp met een overvloed aan vermogen. Hij biedt je een totale installatievrijheid en geeft geen vervorming. Met een koellichaam uit één stuk en een versterkingsfactor tot 6,5 V krijg je in je auto de geluidsomgeving die je altijd al wilde.

Met deze versterker met 4 kanalen kun je meerdere luidsprekers en subwoofers aansturen. Hij kan bovendien overbrugd ('bridged') worden om één enkele subwoofer aan te sturen.

4-kanaalscombineer verbluffende kracht met een groots geluid voor een luide, heldere en ruisvrije muziekervaring

Retail: € 219,00

PIONEER GM-A3702

Overbrugbare versterker
met 2 kanalen (500 W)

Stel de perfecte geluidsinstallatie samen.
De krachtige GM-A3702 werd ontworpen om de audio-ervaring in je auto naar een hoger niveau te tillen. Hij biedt je een totale installatievrijheid en geeft geen vervorming. Met een koellichaam uit één stuk en een versterkingsfactor tot 6,5 V krijg je in je auto de geluidsomgeving die je altijd al wilde.

 

De GM-A3702 biedt ondersteuning voor luidsprekers van 2 en 4 ohm, en kan een vermogen van 500 W produceren wanneer hij overbrugd wordt. Dit product is ook verkrijgbaar als pack in combinatie met onze TS-W306R-subwoofer, ofwel met kabels (GXT-3706B-SET) ofwel zonder kabels (GXT-3706B).

Belangrijkste functies

Gewicht unit 1.4
Luidsprekerterminals Schroefaansluitingen
Maximaal opgenomen vermogen 500W (overbrugd) of 2 x 170W (4 Ω) of 2 x 250 W (2 Ω)
CEA 2006 Power (THD + N = 1%) 2 x 60W (4 Ω)
Continu uitgangsvermogen (RMS) 2 x 60W (4 Ω) or 1 x 190W (4Ω overbrugd) of 2 x 95 W (2 Ω)
Mogelijkheid belastingsimpedantie 2-8 ohm mogelijk (stereo)
Frequentierespons 10Hz ~ 70kHz (+0dB , -3dB) Hz
Vervorming < 0.05 %
S/N-ratio > 95 dB
LPF 80 Hz (-12 dB/oct)
Afmetingen (B x H x D) 238(W) x 60(H) x 180(D)

Retail: € 109,00

PIONEER GM-D1004

ISO versterker
4ch x 40watts RMS

4 Kanaals versterker
400 Watts max power
afmeting 181 x 38 x 64 mm

Klein maar dapper.
Een versterker mag niet te veel plaats innemen, en al zeker niet in je auto. Daarom is deze Klasse-D-versterker misschien wel net wat je zoekt.
De GM-D1004 is een compacte versterker die je heel eenvoudig met kabels en al kunt monteren achter het dashboard van je auto. De stroom wordt via het controlepaneel voorzien dankzij het Protection Control System, dat de overstroom bij een hoge vermogensoutput onderdrukt en extreme oververhitting van de componenten tegengaat zodat het toestel normaal gebruikt kan worden.

4-kanaals versterker
Deze versterker beschikt over een vermogenscondensator met grote capaciteit die zorgt voor een constant vermogen en een helder en krachtig geluid, zelfs bij hoge volumes. Dit compacte design biedt niet minder dan 100 Watt x 4 kanalen.

Ingangssensor De GM-D1004 detecteert automatisch ingangssignalen, en selecteert een ingangssignaalmodus tussen het RCA-niveau en het luidsprekerniveau. Wanneer je deze versterker met behulp van een luidsprekerkabel op een autoreceiver zonder RCA-ingangen aansluit, zullen beide toestellen altijd tegelijk in- en uitschakelen.

Volledige controle over trillingen
Het chassis van de versterker beschikt onderaan over groeven die ongewenste trillingen opvangen die veroorzaakt worden door het rijden. Dankzij dit TVC-concept (total vibration control) geniet je van high definition audio in je auto.

Retail: € 169,00

KENWOOD KSC-SW11

Underseat Model
Space-Saving Subwoofer

Belangrijkste Eigenschappen
150W piek vermogen
Actieve Subwoofer
Gegoten aluminium korf
storingsvrij geluid
Wired remote (Level/Freq./phase control)
Line(RCA) + speaker level input

Luidspreker Eigenschappen
Luidsprekersysteem    actief subwoofersysteem
Piekingangsvermogen    150W
Luidsprekerafmeting    200 x 120 mm
Magneettype    Ferriet
Inclusief Bedrade Afstandsbediening    Ja
Inclusief Versterker    Ingebouwd
Enclosure size (BxHxD)    190 x 70 x 280 mm
Enclosure net weight    2,8 kg

Versterker Eigenschappen
Max. Uitgangsvermogen    150W
Laagdoorlaatfilter    Ja
Fase-omdraaïng 0°(Normaal) / 180°(Omgekeerd)    Ja
Vermogensindicator    Ja
Lijningang    RCA
Ingang op Luidsprekerniveau    Ja
Chassis    Gegoten Aluminium
Inclusief DC-kabel    Ja

Luidspreker/Woofer Specificaties
Piekingangsvermogen    150W
Luidsprekerkorf    Staal
Luidsprekeromranding    Rubber

Versterker Specificaties
Max. Uitgangsvermogen (4Ω)    150W x 1
Laagdoorlaatfilter    50~125 Hz
Frequentiebereik (+0dB, -3dB)    35Hz ~ 150Hz
Bedrijfsvoltage    14,4V (11V ～ 16V Toegestaan)
Stroomverbruik    8,5A

Toebehoren
Afstandsbediening    Afstandbediening met draad
Stroomdraad    500 cm
Schroeven (type parker)    Ø 5 x 16mm, 4 stuks
Schroeven (M-type)    M4 x 6mm, 4 stuks
Tape    1 stuks
montage beugel A    2 stuks
Montage beugel B    1 stuks

Retail: € 199,00

EXCALIBUR X3 pakket

Complete Car Audio set
1000 watts boombox en versterker

Compleet BASS Pakket.
Een compleet boombox pakket.
Een mooie full colour showverpakking met daarin:
12inch boombox, 1000 watts (X12.C)
2 kanalen versterker, 1000 watts (X500.2)
complete kabelset (X8GA)
Deze set past perfect bij elkaar en is makkelijk te installeren.

Retail: € 179,00

EXCALIBUR X500.4

4 Kanaals versterker 
2000 watts

Max. vermogen 4 x 500 Watts
Output vermogen @ 4Ohms: 50W x 4ch
150W x 2ch gebrugd
THD: <0.1%
Freq.bereik (�1dB): 20Hz-25kHz
Signal to noise ratio: >92dB
Gevoeligheid: 150mV-8V
Aanbevolen zekering: 20A x 2
Afmetingen (in mm): 300mm x 230mm x 55mm

Retail: € 99,00

EXCALIBUR X500.2

2 Kanaals versterker
1000 watts

Max vermogen: 1000 Watts
Output vermogen @ 4Ohms: 50W x 2ch
150W x 1ch gebrugd
THD:<0.1%
Freq.bereik (�1dB): 20Hz-25kHz
Signal to noise ratio: >88dB
Gevoeligheid: 150mV-8V
Aanbevolen zekering: 30A x 1
Afmetingen(in mm): 225mm x 230mm x 55mm

Retail: € 89,00

EXCALIBUR X2 trunkpack

Complete Car Audio set
Speakers, Sub en versterker

Kofferbak Pakket. UPGRADE X600.4

Een mooie full colour showverpakking met daarin:
12inch basreflex boombox 1000 watts (X12.1BR)
6x9 inch speakerset voor de hoedenplank (X69.33)
4 kanalen versterker (X600.4)
complete kabelset (X8GA) inclusief extra Y splitters

Retail: € 249,00