KENWOOD KSC-PSW7EQ
Active 160W Subwoofer
The compact aluminum die-cast housing allows installation almost anywhere, including in tight spaces such as under a chair or behind a panel. Features a highly efficient Class-D amplifier, 200 x 130mm aluminum diaphragm with micro-ribbed bracing. The latter suppresses unwanted distortion of the diaphragm and reproduces a precise and powerful bass sound. The newly developed ACTIVE EQ TECHNOLOGY with three types of bass curves to suit the music of different genres delivers a super live sound experience. With the included wired remote control you have full control over this active subwoofer.
1. Aluminum diaphragm/cone.
Large aluminum woofer cone (200 x 130 mm) for deep and clear bass.
2. Micro Step Shape.
KSC-PSW7EQ has a 'micro-ridge' reinforcement around the diaphragm. This micro-ridge suppresses the unwanted distortions of the diaphragm, supports precise vibrations and optimally reproduces the bass sound of the music.
3. Urethane surround.
The Urethane surround provides a long, linear movement of the diaphragm for strong, optimally controlled and focused bass.
4. Compact aluminum die-cast housing.
Designed with a larger housing and wider diaphragm for the ultimate bass response.
Can be installed almost anywhere, even in tight spaces such as under a chair.
Key Features
● 160W Maximum power output for deep and intense bass sound.
● ACTIVE EQ TECHNOLOGY with three preset bass curves suitable for all types of music.
● 200 x 130 mm aluminum diaphragm with reinforcement micro-ribbed all around.
● Highly efficient Class-D amplifier for rich, clean bass.
● Wired remote with power indicator, active EQ switch, volume and frequency control. & phase switch.
● Line and loudspeaker input with automatic switch-on function by means of signal detection.
● Compact die-cast aluminum housing (280 x 70 x 220 mm).
● Connection cables and installation brackets included.
Speaker Features
● Active Subwoofer System
● Maximum output power 160 W
● Speaker size 200 x 130mm
● Includes wired remote control
● Integrated Power Amplifier
● Die-cast aluminum housing
● Housing dimensions (WxHxD) 350 x 75 x 240 mm
● Net weight (full housing) 2.6 kg
Amplifier Features
● Class-D amplifier
● Maximum output power 160W
● Low Pass Filter
● Invert phase: 0°(Normal) / 180°(Inverted)
● Built-in Equalizer
● Power indicator
● Automatic power-on function through signal detection.
● Line-in jacks RCA
● Speaker Level Input
● Die-cast aluminum housing
● Wired Remote Support
● Power Indicator / Volume & frequency controls / 3-mode active EQ / phase control
Speaker/Woofer Specifications
● Cone material Aluminum
● Woofer cone dimensions 200 x 130mm
● Cone suspension material High-roll urethane
● Sensitivity 89dB/W/m
● Frequency range 40Hz ~ 200Hz
● Impedance 1Ω
Amplifier Specifications
● Max. Power Output (4Ω) 160W x 1
● Low-pass filter 50Hz ~125Hz (-18dB)
● Line input sensitivity 20 mV
● Speaker input sensitivity 400 mV
● Line input impedance 22 kΩ
● Speaker input impedance 10 kΩ
● Signal to noise ratio 90dB
● Frequency Response (+0dB, -3dB) 35Hz ~ 150Hz
● Operating voltage 14.4V (11V ～ 16V Allowed)
● Maximum power consumption 5.9A
Accessories
● Mounting brackets Type1 x 1, type2 x1
● Wired Remote Control
● Connection cable with 10-pin plug (5.0m)
● Speaker connection cable (4.3m)
● Double-sided tape for the remote control.
● Screws (parker type) Ø 5 x 12mm, 2 pcs
● Screws (parker type) Ø 3 x 10mm, 2 pcs
● Screws (parker type) Ø 5 x 16mm, 2 pcs
● Speaker Size 78mm
● Satellite Speaker Type
● Maximum power 100 Watt
● Continuous output power 20 W
● Frequency Response 66 Hz - 24 kHz
● Sensitivity 80 dB
● Impedance 4 Ω
● Woofer Material Paper Cone
● Voice coil type Copper
● Voice coil bobbin type Kapton
● Speaker Grill ABS+fabric
Retail:
€ 249,00
