Go to all products

Products per page: 10 | 20 | 50 | 100 | All

JBL BassPro Tube 12inch

Powerful JBL Bass Reinforcement


JBL BassPro Tube Subwoofer delivers 150 Watts of powered noisefree
deep bass thanks to JBL’s patented Slipstream port technology.
The Slipstream port is mathematically engineered to keep airflow with
the port turbulence-free, which avoiding the common shortcoming of
traditional ported boxes. Coupled with the built-in 150Wrms amplifier
the BassPro Tube Subwoofer really delivers. Also the Bass Volume
Remote control is included for easy adjustment, no more stopping to
pop the trunk.
BASSPRO TUBE SUBWOOFER
12” (300mm) Subwoofer

Features
* Slipstream Port Technology
* Reliable Performance
* Single Tube enclosure Total
* Solution
* Bass Volume Remote Control
* Bass boost Volume Control

12” (300mm) Subwoofer
* Driver Complement: 12” (300mm)
* Subwoofer
* Amplifier Power: Class D, 150Wrms,
* 450W max peak
* Frequency Response: 30Hz – 200Hz
* Fuse: 20A
* Maximum Current Draw: 20 A
* Quiescent Current Draw: <0.9A
* Input Sensitivity: 0.15 V – 5V Low-
* Level Input;
* 0.75 V – 25V High-Level Input
* Crossover Point: 105Hz LPF
* Crossover Slope: 12 dB/octave
* Bass Boost: 0dB to + 12dB @ 45 Hz
* Dimensions (W x H x D): 336(W.H) × * 665(D) mm
* Weight: 19.84 lb (9kg)

Retail: € 349,50

JBL Marine & Powersports Rallybar XL

 
 
JBL RALLYBAR XL is a IP66 rated water resistant Bluetooth® Soundbar with 300Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation.

Each RALLYBAR XL can be used by itself or connected to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode.

The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements.

Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.

* Transducers 8x 2.75”(70mm) woofers, 2x 1”(25mm) Tweeters, 4 x 7.2"(182.8mm) x3"(76.2mm) Racetrack Passive Radiators
* Output Power 300WRMS, 600W PEAK (IEC60268)
THD at Rated RMS Power < 1%
* Voltage Range: 9.6 - 16VDC
* Quiescent Current Draw < 0.9A
* Maximum Current Draw 40A
* Frequency response 45Hz-40kHz
* Signal-to-noise Ratio > 80 dB
* Cable type 10 AWG
* Cable length 12 Feet (3.66m)
* Bluetooth® Version 5.3
* Bluetooth® profile A2DP V1.3, AVRCP V1.6
* Bluetooth® transmitter frequency range 2400 MHz – 2483.5 MHz
* Bluetooth® transmitter power ≤ 15 dBm (EIRP)
* Aux-In 2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
* Aux-Out 2 Vrms (3.5 mm connector)
* USB format FAT16, FAT32
* Soundbar Dimension (L x W x H) 35-11/32" x 5" x 4-5/8" (897.5 x 126.7 x 118mm)
* Soundbar Weight 20.83 lbs (9.45 kg)
* Packaging dimensions (W x H x D) 38.2" x 9" x 7.6" (971 x 229 x 193mm)
* Gross weight 27.5 lbs (12.52 kg)

Retail: € 1.299,00

JBL BassPro Lite

Underseat Subwoofer

Ultra-Compact, Super Bass, Powerful

JBL BassPro LITE delivers deep bass and takes up ultra-compact space.

JBL’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100Watts Amplifier, BassPro LITE delivers accurate, tight bass you would expect from JBL, all while running cool and drawing minimal current from your vehicles charging system.

Features
Big Bass,ultra-compact space
Upgrade easier, Connected in series
Intelligent Electronic Design for Reliable and Extraordinary Performance
Die-Casting Aluminum Enclosure Design
Bass boost Volume Control

Features and Benefits

Big Bass,ultra-compact space
JBL BassPro LITE delivers deep bass and takes up ultra-compact space. Its onboard 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.

Upgrade easier, Connected in series
JBL BassPro LITE can be connected in series for user upgrade to purchase 2 set devices. The secondary BassPro LITE is still adjusted by them-self without extra Power / Single complex wires

Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassPro LITE employs high-pass filters and limiters that deliver exceptional at-the-limits performance.

Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design is not only Ultra-compact size, but the ALL IN ONE is combined elegant JBL industry design element and powerful acoustic performance.

Bass boost Volume Control
Bass boost Volume control is intergraded on I/O panel to let you adjust the sound freely

Technical Specifications
Driver Complement: super powerful 7”(178mm) Subwoofer
Amplifier Power: Class D, 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 15 A
Quiescent Current Draw: Input Sensitivity: 0.18 V – 5.0 V Low-
Level Input; 0.75 V – 20V High-Level Input
Crossover Frequency: 50 Hz – 150 Hz
Crossover Slope: 12 dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 10-1/4” x 8” x 2-9/16” (259.6mm x 203.1mm x 65.5mm)
Weight: 8 lbs (3.5kg)

What’s in the box
1x Under seat subwoofer
4x Screws
2x Wiring harness for power and speaker level input (300mm)
1x 15A Fuse

Retail: € 249,50

JBL BassPro Duo Pack Lite

Underseat Subwoofer

Ultra-Compact, Super Bass, Powerful

JBL BassPro LITE delivers deep bass and takes up ultra-compact space.

JBL’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100Watts Amplifier, BassPro LITE delivers accurate, tight bass you would expect from JBL, all while running cool and drawing minimal current from your vehicles charging system.

Features
Big Bass,ultra-compact space
Upgrade easier, Connected in series
Intelligent Electronic Design for Reliable and Extraordinary Performance
Die-Casting Aluminum Enclosure Design
Bass boost Volume Control

Features and Benefits

Big Bass,ultra-compact space
JBL BassPro LITE delivers deep bass and takes up ultra-compact space. Its onboard 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.

Upgrade easier, Connected in series
JBL BassPro LITE can be connected in series for user upgrade to purchase 2 set devices. The secondary BassPro LITE is still adjusted by them-self without extra Power / Single complex wires

Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassPro LITE employs high-pass filters and limiters that deliver exceptional at-the-limits performance.

Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design is not only Ultra-compact size, but the ALL IN ONE is combined elegant JBL industry design element and powerful acoustic performance.

Bass boost Volume Control
Bass boost Volume control is intergraded on I/O panel to let you adjust the sound freely

Technical Specifications
Driver Complement: super powerful 7”(178mm) Subwoofer
Amplifier Power: Class D, 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 15 A
Quiescent Current Draw: Input Sensitivity: 0.18 V – 5.0 V Low-
Level Input; 0.75 V – 20V High-Level Input
Crossover Frequency: 50 Hz – 150 Hz
Crossover Slope: 12 dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 10-1/4” x 8” x 2-9/16” (259.6mm x 203.1mm x 65.5mm)
Weight: 8 lbs (3.5kg)

What’s in the box
1x Under seat subwoofer
4x Screws
2x Wiring harness for power and speaker level input (300mm)
1x 15A Fuse

Retail: € 499,00

JBL JBL GEN3 Free JBL PartyBox 710 Pack6 104MIX

FREE JBL PartyBox 710 SPEAKER

8x Club 194T
8x Club 34F
8x Club 44F
8x Club 54F
8x Club 64FSL
8x Club 64
8x Club 64SQ
8x Club 64C
8x Club 64CTP
8x Club 64CSQ
8x Club 644F
8x Club 864F
8x Club 964M

Retail: € 12.424,00

JBL JBL GEN3 Free JBL Encore Pack4 36MIX

FREE JBL Encore SPEAKER

4x Club 194T
4x Club 34F
4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
4x Club 644F
4x Club 864F
4x Club 964M

Retail: € 3.780,00

JBL GEN3 Free JBL PartyBox 310 Pack5 52MIX

FREE JBL PartyBox 310 SPEAKER

4x Club 194T
4x Club 34F
4x Club 44F
4x Club 54F
4x Club 64FSL
4x Club 64
4x Club 64SQ
4x Club 64C
4x Club 64CTP
4x Club 64CSQ
4x Club 644F
4x Club 864F
4x Club 964M

Retail: € 6.212,00

JBL GEN3 Free JBL Charge Pack3 26MIX

FREE JBL Charge SPEAKER

4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
2x Club 194T
2x Club 34F
2x Club 644F
2x Club 864F
2x Club 964M

Retail: € 2.786,00

JBL GEN3 Free JBL Flip Pack2 16MIX

FREE JBL FLIP SPEAKER

4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP

Retail: € 1.832,00

JBL GEN3 Free JBL Wind3S Pack1 12MIX

FREE JBL WIND3S SPEAKER

4x Club 44F
4x Club 54F
4x Club 64

Retail: € 1.154,00

JBL Club GEN3 644F

4”x 6” (100mm x 152mm) Two-Way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 644F (4”x 6” (100mm x 152mm) Two-Way Car Speaker)
Power Handling: 40W RMS, 120W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 89,50

JBL Club GEN3 194T

3/4” (19mm) Edge-Driven Dome Tweeter


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 194T (3/4” (19mm) Edge-Driven Dome Tweeter)
Power Handling: 50W RMS, 150W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 3kHz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 69,50

JBL Club GEN3 964M

6”x9” (152mm x 230mm) Three-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 964M (6”x9” (152mm x 230mm) Three-way Car Speaker)
Power Handling: 85W RMS, 255W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 50Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 139,50

JBL Club GEN3 864F

6”x8” (152mm x 203mm) Two-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 864F (6”x8” (152mm x 203mm) Two-way Car Speaker)
Power Handling: 60W RMS, 180W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 65Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 99,00

JBL Club GEN3 64CSQ

6-1/2” (160mm) 2-way Component Speaker System


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.

Retail: € 219,50

JBL Club GEN3 64FSL

Shallow-Mount 6-1/2” (160mm) Two-Way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64FSL (Shallow-Mount 6-1/2” (160mm) Two-Way Car Speaker)
Power Handling: 55W RMS, 165W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 89,50

JBL Club GEN3 64CTP

6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64C & Club 64CTP (6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod)
Power Handling: 70W RMS, 210W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 169,50

JBL Club GEN3 64SQ

6-1/2” (160mm) 2-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.

Retail: € 139,50

JBL Club GEN3 64

6-1/2” (160mm) Two-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64 (6-1/2” (160mm) Two-way Car Speaker, Engineered For Better Sound Performance)
Power Handling: 60W RMS, 180W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 48Hz – 21kHz
Nominal Impedance: 3.0 ohms

Retail: € 109,50

JBL Club GEN3 64C

6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64C & Club 64CTP (6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod)
Power Handling: 70W RMS, 210W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 159,50

JBL Club GEN3 54F

5-1/4” (130mm) Two-Way Car Speaker


Pro Car Audio by JBL

Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits

Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.

Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.

Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.

Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.

Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.

Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.

Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.

I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.

Club 54F (5-1/4” (130mm) Two-Way Car Speaker)
Power Handling: 45W RMS, 135W peak
Sensitivity (@ 2.83V): 91dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 99,50

JBL Club GEN344F

4” (100mm) Two-Way Car Speaker


Pro Car Audio by JBL

Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits

Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.

Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.

Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.

Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.

Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.

Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.

Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.

I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.

Club 44F (4” (100mm) Two-Way Car Speaker)
Power Handling: 35W RMS, 105W peak
Sensitivity (@ 2.83V): 90dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 89,50

JBL Club GEN3 34F

3-1/2” (87mm) Two-Way Car Speaker


Pro Car Audio by JBL

Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits

Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.

Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.

Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.

Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.

Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.

Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.

Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.

I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.

Club 34F (3-1/2” (87mm) Two-Way Car Speaker)
Power Handling: 25W RMS, 75W peak
Sensitivity (@2.83V): 89dB
Frequency Response: 90Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 79,50

Infinity Subblsm2

Underseat Subwoofer 125W RMS

Discover the ultimate power of sound with the InfinityWoofer 8" (200mm) Car Subwoofer! Experience an unparalleled audio journey while driving with this high-quality subwoofer designed to take your music to the next level. With impressive specifications and features, the InfinityWoofer offers an immersive sound that will captivate your senses.

The built-in amplifier of this subwoofer delivers a powerful output of 125W RMS, allowing you to enjoy deep, resonating bass. The subwoofer boasts an extensive frequency response of 35Hz - 120Hz, enabling you to perceive all the nuances of low tones with exceptional clarity.

With a 15A fuse and a maximum current draw of 12A, you can count on stable and reliable performance. Additionally, the InfinityWoofer has a quiescent current draw of less than 800mA, saving you energy without compromising sound quality.

The subwoofer is designed with versatility in mind, offering various input sensitivities. You can easily connect your audio equipment via the 0.05V - 2V line-level input or the 0.5V - 20V high-level input. This makes the InfinityWoofer compatible with a range of systems and sources, giving you the freedom to experience your music the way you want to.

The crossover frequency of 50Hz - 120Hz and the 12dB/octave crossover slope allow you to precisely tailor the sound to your preferences. With the bass boost function, you can further enhance the bass response, ranging from 0dB to +9dB at 70Hz. This way, you can create the perfect balance and feel the impact of your favorite music in every fiber of your being.

Choose the InfinityWoofer 8" (200mm) Car Subwoofer and experience sound quality that exceeds your expectations. Whether you're a fan of punchy beats or a lover of deep bass, this subwoofer consistently delivers an impressive performance. Upgrade your car ride and enjoy the powerful, immersive music you deserve.

Order the InfinityWoofer 8" (200mm) Car Subwoofer today and discover the true meaning of sound quality on the road.

Woofer 8" (200mm)
Amplier Power 125W RMS
Frequency Response 35Hz – 120Hz
Fuse 15A
Maximum Current Draw 12A
Quiescent Current Draw <800mA
Input Sensitivity 0.05V – 2V Line-Level Input;
0.5V – 20V High-Level Input
Crossover Frequency 50Hz – 120Hz
Crossover Slope 12dB/octave
Bass Boost 0dB to +9dB @ 70Hz

Retail: € 369,95

Infinity SubblMini

Underseat Subwoofer 270W
Make the Driver’s Seat the Best Seat in The Vehicle.
Infinity BassLink MINI delivers deep bass and takes up little space. Infinity’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100 Watts Amplifier, Basslink MINI delivers accurate, tight bass you would expect from Infinity, all while running cool and drawing minimal current from your vehicles charging system.
Big Bass, Small Space
Infinity BassLink MINI delivers deep bass and takes up minimal space. Its on-board 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.
Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassLink MINI employs high-pass filters and limiters that deliver exceptional at-the-limits performance.
Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design not only minimizes size but also eliminates rattles to deliver clear bass from tiny space.
Bass Volume Remote Control
Bass Volume Remote control is included to let you adjust the sound from the driver’s seat.
Specifications:
Driver Complement: 6" x 8" (152mm x 203mm) Subwoofer
Amplifier Power: 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 13A
Quiescent Current Draw: <600mA
Input Sensitivity: 0.1V – 4.0V Low-Level Input;
0.25V – 10V High-Level Input
Crossover Frequency: 50Hz – 150Hz
Crossover Slope: 12dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 11-7/16" x 8-5/16" x 3"
(289.6mm x 209.6mm x 75.0mm)
Weight: 8.22 lbs (3.73kg)

Retail: € 299,95

Infinity AMPRF6001A

600W RMS AMPLIFIER

Discover the power of sound with the Infinity 600W RMS car amplifier. This groundbreaking Class D amplifier takes your audio experience to a whole new level. With a power output of 600 watts RMS, this amplifier delivers dynamic sound that brings every note to life, whether you're into rock, pop, hip-hop, or classical music.

The Infinity car amplifier is designed with precision and craftsmanship, resulting in unparalleled sound quality. Thanks to the variable low-pass filter, you can fine-tune the low frequencies to your personal preference and find the perfect balance between clarity and depth. This ensures that every bassline and beat sounds crystal clear and tight, providing you with an immersive listening experience.

With the variable bass boost feature, you have full control over the low tones. Whether you want a subtle bass for a relaxed ride or a powerful bass that makes your windows shake, this amplifier can handle it all. Easily adjust the bass boost to your taste and enjoy deep, rich bass reproduction that will get your heart pounding.

In addition to delivering impressive sound, the Infinity car amplifier also offers a stylish and compact design that seamlessly fits into any vehicle. The amplifier is built with durability in mind, making it resistant to the challenges of daily use on the road.

With the Infinity 600W RMS car amplifier, you'll enjoy a sonic powerhouse that transforms every ride into a concert on wheels. Experience the perfect combination of power, control, and sound quality. Upgrade your audio system today and let your music come to life with the Infinity car amplifier.

General Specifications
350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
Class D amp technology
variable low-pass filter (32-320 Hz, 12 dB/octave)
variable bass boost (0-12 dB at 45Hz)
phase switch (0, 180 degrees)
preamp and speaker-level inputs
fuse rating30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=220mm x 55.5mm x 180mm WxHxD=8-11/16” x 2-3/16" x7-1/8”
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=360mm x 55.5mm x 180mm WxHxD=14-3/16” x 2-3/16" x7-1/8”
600w RMS / 1200W MAX

Retail: € 299,95

Infinity AMP3004A

4x75, 4x100 or 2x200W AMPLIFIER

Discover the power of sound with the Inifity car amplifier. This groundbreaking Class D amplifier takes your audio experience to a whole new level. With a power output of 4x75 or 2x200 watts RMS, this amplifier delivers dynamic sound that brings every note to life, whether you're into rock, pop, hip-hop, or classical music.

The Inifity car amplifier is designed with precision and craftsmanship, resulting in unparalleled sound quality. The variable low-pass filter allows you to fine-tune the low frequencies to your personal preference and find the perfect balance between clarity and depth. This ensures that every bassline and beat sounds crystal clear and tight, providing you with an immersive listening experience.

With the variable bass boost feature, you have full control over the low-end frequencies. Whether you want a subtle bass for a relaxed drive or a powerful bass that rattles the windows, this amplifier can handle it all. Simply adjust the bass boost to your taste and enjoy deep, rich bass reproduction that gets your heart racing.

In addition to delivering impressive sound, the Inifity car amplifier also offers a stylish and compact design that seamlessly fits into any vehicle. The amplifier is built with durability in mind, making it resistant to the challenges of daily road use.

With the Inifity car amplifier, you'll enjoy a sonic powerhouse that transforms every journey into a concert on wheels. Experience the perfect combination of power, control, and sound quality. Upgrade your audio system today and let your music come to life with the Inifity car amplifier.

General Specifications
75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
Preamp and speaker-level inputs
Preamp outputs
Fuse rating30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
WxHxD=320mm x 55.5mm x 180mm WxHxD=12-5/8” x 2-3/16" x 7-1/8”

Retail: € 299,95

Infinity The Legend Returns

COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON! COMING SOON!

Retail: € 0,00

JBL Concert PACK 4



CONCERT A704

STAGE1 621

STAGE1 9631

Retail: € 199,00

JBL Concert PACK 3


CONCERT A652
STAGE1 601c

Retail: € 159,00

JBL Concert PACK 2

1 x
CONCERT A704

2 x
STAGE1 621

Retail: € 199,00

JBL Concert PACK 1



CONCERT A652

STAGE1 621

Retail: € 149,00

JBL Concert PACK TRUNCK



Stage1 9631

Stage 122

Ne1212.2

Cke10

SI-E2Y Y-Adapter

Retail: € 299,00

JBL Concert PACK BASS8



Concert a652

Stage82

Ne0808.1

Cke10

Retail: € 199,00

JBL Concert PACK BASS10



Concert a652

Stage102

Ne1010.2

Cke10

Retail: € 219,00

JBL Concert PACK BASS12



Concert a652

Stage122

Ne1212.2

Cke10

Retail: € 239,00

JBL STAGE ONE-DER-FULL

110 x Stage141f + 10 free
110 x Stage151f + 10 free
110 x Stage161f + 10 free
110 x Stage19631 + 10 free

Buy 110 each - 440 sets total
Get 10 each for free (8,33% discount)

Retail: € 0,00

Infinity REF9632IXAM

300W 9 x 6" 2-way speaker

ONLY FOR SELECTED DISTRIBUTORS

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes—3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component—they’re the perfect upgrade from factory speakers.

Know What's In The Box
1 x Pair of coaxial speakers
1 x Pair of speaker grilles
1 x Pair of spacers
8 x Mounting screws
8 x Speed clips
1 x Set foam mounting tape
1 x Owner’s manual

General Specifications
Description
6"x9" (152mm x 230mm) coaxial car speaker
Power Handling
100W RMS, 300W peak
Sensitivity (@ 2.83V)
94dB
Frequency Response
46Hz – 20kHz
Impedance
3.0 ohms

Edge-driven, textile tweeters
The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels.

Adjustable tweeter output level
The larger Reference multielement and component systems offer a tweeter output level control to optimize system linearity to suit installation location or the listener's preference.

Plus One™ woofer cone architecture
Harman’s patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output and accurate music reproduction.

Optimized Frame Size
Reference speakers are available in a range of standard sizes, and feature a compact design that allows them to fit just about any vehicle on the road today.

Retail: € 149,95

Infinity REF6530CXAM

270W 6 1/2" 2-way speakerset

ONLY FOR SELECTED DISTRIBUTORS

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes—3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component—they’re the perfect upgrade from factory speakers.

Know What's In The Box
1 x Pair of woofers
1 x Pair of tweeters
1 x Pair of speaker grilles
1 x Pair of crossovers
1 x Pair of woofer mounting brackets
1 x Pair of tweeter surface mount accessories
1 x Pair of tweeter flush mount accessories
1 x Pair of tweeter nuts
1 x Pair of tweeter flat washers
6 x Tweeter mounting screws
8 x Woofer mounting screws
8 x Crossover mounting screws
8 x Speed clips
1 x Foam mounting tape
1 x Owner’s manual

General Specifications
Description
6-1/2" (160mm) component speaker system
Power Handling
90W RMS, 270W peak
Sensitivity (@ 2.83V)
93dB
Frequency Response
53Hz – 21kHz
Impedance
3.0 ohms

Edge-driven, textile tweeters
The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels.

Adjustable tweeter output level
The larger Reference multielement and component systems offer a tweeter output level control to optimize system linearity to suit installation location or the listener's preference.

Plus One™ woofer cone architecture
Harman’s patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output, and accurate music reproduction.

Optimized Frame Size
Reference speakers are available in a range of standard sizes, and feature a compact design that allows them to fit just about any vehicle on the road today.

Retail: € 179,95

Infinity REF6532EXAM

165W 6 1/2" 2-way speaker

ONLY FOR SELECTED DISTRIBUTORS

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes—3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component—they’re the perfect upgrade from factory speakers.

Know What's In The Box
1 x Pair of shallow-mount coaxial speakers
1 x Pair of speaker grilles
8 x Large mounting screws
8 x Speed clips
8 x Small mounting screws
1 x Pair of adapter rings
1 x Foam mounting tape
1 x Owner’s manual

General Specifications
Description
6-1/2" (160mm) shallow-mount coaxial car speaker
Power Handling
55W RMS, 165W peak
Sensitivity (@ 2.83V)
93dB
Frequency Response
57Hz – 21kHz
Impedance
3.0 ohms

Edge-driven, textile tweeters
The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels.

Adjustable tweeter output level
The larger Reference multielement and component systems offer a tweeter output level control to optimize system linearity to suit installation location or the listener's preference.

Plus One™ woofer cone architecture
Harman’s patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output and accurate music reproduction.

Optimized Frame Size
Reference speakers are available in a range of standard sizes, and feature a compact design that allows them to fit just about any vehicle on the road today.

Retail: € 119,95

Infinity REF5032CFXAM

135W 5 1/4" 2-way speaker

ONLY FOR SELECTED DISTRIBUTORS

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes—3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component—they’re the perfect upgrade from factory speakers.

Know What's In The Box
1 x Pair of coaxial speakers
1 x Foam mounting tape
1 x Owner’s manual

General Specifications
Description5-1/4" (130mm) coaxial car speaker
Power Handling45W RMS, 135W peak
Sensitivity (@ 2.83V)92dB
Frequency Response67Hz – 21kHz
Impedance3.0 ohms


Edge-driven, textile tweeters
The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels.

Adjustable tweeter output level
The larger Reference multielement and component systems offer a tweeter output level control to optimize system linearity to suit installation location or the listener's preference.

Plus One™ woofer cone architecture
Harman’s patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output and accurate music reproduction.

Optimized Frame Size
Reference speakers are available in a range of standard sizes, and feature a compact design that allows them to fit just about any vehicle on the road today.

Retail: € 109,95

Infinity REF4032CFXAM

105W 4" 2-way speaker

ONLY FOR SELECTED DISTRIBUTORS

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes—3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component—they’re the perfect upgrade from factory speakers.

Know What's In The Box
Know What's In The Box
1 x Pair of coaxial speakers
1 x Foam mounting tape
1 x Owner’s manual

General Specifications
Description4" (100mm) coaxial car speaker
Power Handling35W RMS, 105W peak
Sensitivity (@ 2.83V)92dB
Frequency Response75Hz – 21kHz
Impedance3.0 ohms

Edge-driven, textile tweeters
The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels.

Adjustable tweeter output level
The larger Reference multielement and component systems offer a tweeter output level control to optimize system linearity to suit installation location or the listener's preference.

Plus One™ woofer cone architecture
Harman’s patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output, and accurate music reproduction.

Optimized Frame Size
Reference speakers are available in a range of standard sizes, and feature a compact design that allows them to fit just about any vehicle on the road today.

Retail: € 99,95

JBL Stage3 507CF

5 ¼” (130mm) 2-way

Power Handling: 45W RMS, 135W PEAK
Sensitivity (@2.83v): 91dB
Frequency Response: 75Hz-20kHz
Impedance: 3ohms
Key Features:
Plus OneTM  Woofer Cone
Vented Basket Frame Design
Edge-Driven Dome Tweeter

Retail: € 89,50

JBL HTT Powerpack+

Woofer + Amp

JBL S2-1224SS

Share on:
12" (30cm) Subwoofer Box

Series II subwoofer box offers improved efficiency and higher output than a vented subwoofer box without the distracting noise or "chugging" generated by a port. The patented Slipstream port significantly reduces port noise at high sound pressure levels by minimizing airflow turbulence. Series II subwoofer box, with high-roll surrounds, patented cone design and long-excursion, delivers deep, powerful bass with greater accuracy than conventional bass reflex boxes. And the exclusive SSI™ (Smart Selectable Impedance) switch lets you choose between 2- or 4-ohm impedance for maximum configuration flexibility. It's everything you're looking for in a compact, easy-to-install subwoofer box.

+

JBL Stage A3001

Share on:
1 Channel Mono Amplifier
600 watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they'll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms N/A
RMS power @ 2 ohms 300W
RMS bridged power @ 4 ohms N/A
Total peak power 600W
Frequency response 10Hz – 320Hz @ -3dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2x15A
Dimensions (H x W x L) 50 x 145 x 241.6mm
Weight 1,609 kg

Retail: € 449,00

JBL BassPro Go with the WIND Bundle - Dealer Pack



10 X WIND3S
2 X BASSPRO GO + HOME CHARGER

Retail: € 1.997,50

JBL The Ultimate JBL Mix - Dealer Pack



4 X STAGE 624
4 X STAGE2 524
4 X STAGE2 424
4 X STAGE1 601C
4 X STAGE1 621
4 X STAGE3 427
2 X STAGE3 6427
4 X STAGE3 527
4 X STAGE3 627
2 X STAGE3 607C
2 X STAGE3 8627
2 X STAGE3 9637
2 X CLUB322
2 X CLUB422
2 X CLUB522
2 X CLUB622
2 X CLUB602CTP
1 X STADIUM 62
1 X STADIUM 52
1 X STADIUM 62CF
1 X STADIUM 52CF
2 X STAGE-A3001
2 X CONCERT A652
2 X CONCERT A704
1 X CLUB-A5505
1 X CLUB-A754
1 X CLUB-A1000
1 X CLUB-A600
1 X S2-1224SS
1 X STAGE 122
1 X STAGE 102
1 X STAGE 82
1 X CLUB1224
1 X STADIUM1224
1 X NANO
1 X SL2
1 X FUSE PACK (FUSE + 3001 + WIRES )
1 X HUB
1 X BP12
1 X PB8
1 X BASSPRO GO

Retail: € 10.250,00

JBL Wind3S

JBL Wind 3 is a durable true Bluetooth speaker for on the go, ready for hiking on the trails, biking on the street and wherever your adventure takes you. JBL Wind 3 is a true Bluetooth speaker for cycling. Clipped to your backpack's shoulder strap, looped on a cord/chain, or even strapped to your bike handlebars, JBL Wind 3 delivers sound wherever you go.

Functions:
Dock/handlebar mount
Two different EQ modes
Bluetooth
IP67 waterproof and dustproof

Technical specifications
Transducer: 43 x 47mm/1.5"
Output Power: 5W RMS
Frequency range: 110Hz – 20kHz
Signal-to-noise ratio: >85dB
Battery Capacity: 1050mAh
Battery charging time: 2.5 hours (5V–1A)
Music playback time: up to 5 hours (depending on volume level and audio content)
Bluetooth® version: 5.0
Bluetooth® profile: A2DP 1.3, AVRCP 1.6, HFP 1.7
Frequency range Bluetooth® transmitter: 2400 MHz – 2483.5 MHz
Dimensions (W x H x D): 90 x 73.2 x 35.8 mm
Weight: 0.230kg

Retail: € 79,95

JBL Stage 1200S

12'' Inch Subwoofer - 250 Watts RMS


All-in-one solution
JBL designed their Stage Series subwoofers to give you great bass at an attractive price. Now they've created the Stage 1200S enclosure for those who prefer a matched sub-and-box solution.

250 Watts RMS
The sealed Stage 1200S enclosure comes with one Stage 122 12-inch subwoofer, which features a polypropylene cone with a rubber surround. The sub can handle up to 250 watts RMS, and its 2 ohm impedance makes it a great match for most sub amps. The enclosure is constructed from 5/8" MDF covered with black carpet to resist knocks and beaching. JBL tunes the enclosure to maximize the subwoofer's performance, so you can count on an impressive low-end punch.

Specifications:
sealed enclosure with one Stage 122 12" subwoofer
2-ohm impedance
polypropylene cone with rubber edge
power handling: 250 watts RMS (1000 watts peak)
frequency range: 34-200 Hz
sensitivity: 91 dB
Dimensions: 17.25"W x 14.5"H x11.5"D1 x7.75"D2
What's in the box:
Sealed enclosure loaded with one 12" subwoofer
User Manual (Eng / Fren / Span / Other)
2 JBL stickers

Retail: € 199,50

JBL Home Charger BassPro Go



To charge your BassPro Go with a wall plug.

Retail: € 69,95

JBL StagePack1

JBL STAGE 1200S
Woofer: 12" (300mm)
Power handling: 250Wrms
Power handling, peak: 1000W
Sensitivity (2.83V @1m): 91dB
Frequency response: 34Hz – 200Hz
Impedance: 2 ohms
Dimensions: (WxHxD1xD2)
17-3/16" x 14-3/8" x 6-5/16" x 9-15/16"/
(436mm x 365mm x 159mm x 252mm)

JBL STAGE A6002
Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 280W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio(reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.0A
Fuse size 20A
Dimensions (H x W x L) 50 x 145 x 156.6mm
Weight 1.16kg

NECOM CK-J10
- 8GA Ultra Flexible Solid Orange power cable 5 meter
- 8GA Ultra Flexibles Solid Black Ground Cable 0.9 meter
- Ultra Flexible Transparent Orange Interconnected Cable 5 meter
- Ultra Flexible Transparent Speaker Cable 1.5 meter
- MINI-ANL FUSE HOLDER (1pc), 2PCS MINI-ANL FUSE (60A,80A)
- 2PCS RING 8GA TERMINAL
- 2PCS SPADE 8GA TERMINAL
- 8PCS BLACK TIE
- 5PCS spade terminal 14-16GA
- 3PCS butt connector
- 3PCS SCREW
- 1PC GROMMET

Retail: € 249,00

NEED HELP?

WhatsApp Call me back