Go to all products

Products per page: 10 | 20 | 50 | 100 | All

JBL BassPro Tube 12inch

Powerful JBL Bass Reinforcement


JBL BassPro Tube Subwoofer delivers 150 Watts of powered noisefree
deep bass thanks to JBL’s patented Slipstream port technology.
The Slipstream port is mathematically engineered to keep airflow with
the port turbulence-free, which avoiding the common shortcoming of
traditional ported boxes. Coupled with the built-in 150Wrms amplifier
the BassPro Tube Subwoofer really delivers. Also the Bass Volume
Remote control is included for easy adjustment, no more stopping to
pop the trunk.
BASSPRO TUBE SUBWOOFER
12” (300mm) Subwoofer

Features
* Slipstream Port Technology
* Reliable Performance
* Single Tube enclosure Total
* Solution
* Bass Volume Remote Control
* Bass boost Volume Control

12” (300mm) Subwoofer
* Driver Complement: 12” (300mm)
* Subwoofer
* Amplifier Power: Class D, 150Wrms,
* 450W max peak
* Frequency Response: 30Hz – 200Hz
* Fuse: 20A
* Maximum Current Draw: 20 A
* Quiescent Current Draw: <0.9A
* Input Sensitivity: 0.15 V – 5V Low-
* Level Input;
* 0.75 V – 25V High-Level Input
* Crossover Point: 105Hz LPF
* Crossover Slope: 12 dB/octave
* Bass Boost: 0dB to + 12dB @ 45 Hz
* Dimensions (W x H x D): 336(W.H) × * 665(D) mm
* Weight: 19.84 lb (9kg)

Retail: € 349,50

JBL Marine & Powersports Rallybar XL

 
 
JBL RALLYBAR XL is a IP66 rated water resistant Bluetooth® Soundbar with 300Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation.

Each RALLYBAR XL can be used by itself or connected to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode.

The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements.

Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.

* Transducers 8x 2.75”(70mm) woofers, 2x 1”(25mm) Tweeters, 4 x 7.2"(182.8mm) x3"(76.2mm) Racetrack Passive Radiators
* Output Power 300WRMS, 600W PEAK (IEC60268)
THD at Rated RMS Power < 1%
* Voltage Range: 9.6 - 16VDC
* Quiescent Current Draw < 0.9A
* Maximum Current Draw 40A
* Frequency response 45Hz-40kHz
* Signal-to-noise Ratio > 80 dB
* Cable type 10 AWG
* Cable length 12 Feet (3.66m)
* Bluetooth® Version 5.3
* Bluetooth® profile A2DP V1.3, AVRCP V1.6
* Bluetooth® transmitter frequency range 2400 MHz – 2483.5 MHz
* Bluetooth® transmitter power ≤ 15 dBm (EIRP)
* Aux-In 2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
* Aux-Out 2 Vrms (3.5 mm connector)
* USB format FAT16, FAT32
* Soundbar Dimension (L x W x H) 35-11/32" x 5" x 4-5/8" (897.5 x 126.7 x 118mm)
* Soundbar Weight 20.83 lbs (9.45 kg)
* Packaging dimensions (W x H x D) 38.2" x 9" x 7.6" (971 x 229 x 193mm)
* Gross weight 27.5 lbs (12.52 kg)

Retail: € 1.299,00

KENWOOD UBZ-LJ9SET

Walkie-Talkie


With the convenient set of walkie-talkies UBZ-LJ9SET, you have your communication securely under control. It fits perfectly in the hand and is easy to operate. With its 138 grams, it is a real lightweight and can be easily carried in a bag or attached to the belt. The texts for this article have been automatically translated.

Features Illuminated dot matrix display, high-quality finish, compact dimensions Li-ion battery 1150 mAh Large wireless range of up to 6 km USB-C charging port CTCSS/DCS (Continuous Tone-Coded Squelch System/Digital Coded Squelch) function VOX (Voice-Activated Transmission) function Channel scan function Time-Out Timer Low-level battery warning Noise lock (squelch) Selectable signal tones Selectable 2.5 / 3.5 mm Kenwood dual connector

Highlights Compact, lightweight, and easy to operate Illuminated dot matrix display Large wireless range of up to 6 km

Package Contents 2x UBZ-LJ9 walkie-talkies 2x belt clip 2x Li-ion battery 1150 mAh 2x USB-C charging cable USB charger with two ports User manual

Retail: € 99,00

JBL BassPro Lite

Underseat Subwoofer

Ultra-Compact, Super Bass, Powerful

JBL BassPro LITE delivers deep bass and takes up ultra-compact space.

JBL’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100Watts Amplifier, BassPro LITE delivers accurate, tight bass you would expect from JBL, all while running cool and drawing minimal current from your vehicles charging system.

Features
Big Bass,ultra-compact space
Upgrade easier, Connected in series
Intelligent Electronic Design for Reliable and Extraordinary Performance
Die-Casting Aluminum Enclosure Design
Bass boost Volume Control

Features and Benefits

Big Bass,ultra-compact space
JBL BassPro LITE delivers deep bass and takes up ultra-compact space. Its onboard 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.

Upgrade easier, Connected in series
JBL BassPro LITE can be connected in series for user upgrade to purchase 2 set devices. The secondary BassPro LITE is still adjusted by them-self without extra Power / Single complex wires

Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassPro LITE employs high-pass filters and limiters that deliver exceptional at-the-limits performance.

Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design is not only Ultra-compact size, but the ALL IN ONE is combined elegant JBL industry design element and powerful acoustic performance.

Bass boost Volume Control
Bass boost Volume control is intergraded on I/O panel to let you adjust the sound freely

Technical Specifications
Driver Complement: super powerful 7”(178mm) Subwoofer
Amplifier Power: Class D, 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 15 A
Quiescent Current Draw: Input Sensitivity: 0.18 V – 5.0 V Low-
Level Input; 0.75 V – 20V High-Level Input
Crossover Frequency: 50 Hz – 150 Hz
Crossover Slope: 12 dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 10-1/4” x 8” x 2-9/16” (259.6mm x 203.1mm x 65.5mm)
Weight: 8 lbs (3.5kg)

What’s in the box
1x Under seat subwoofer
4x Screws
2x Wiring harness for power and speaker level input (300mm)
1x 15A Fuse

Retail: € 249,50

JBL BassPro Duo Pack Lite

Underseat Subwoofer

Ultra-Compact, Super Bass, Powerful

JBL BassPro LITE delivers deep bass and takes up ultra-compact space.

JBL’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100Watts Amplifier, BassPro LITE delivers accurate, tight bass you would expect from JBL, all while running cool and drawing minimal current from your vehicles charging system.

Features
Big Bass,ultra-compact space
Upgrade easier, Connected in series
Intelligent Electronic Design for Reliable and Extraordinary Performance
Die-Casting Aluminum Enclosure Design
Bass boost Volume Control

Features and Benefits

Big Bass,ultra-compact space
JBL BassPro LITE delivers deep bass and takes up ultra-compact space. Its onboard 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.

Upgrade easier, Connected in series
JBL BassPro LITE can be connected in series for user upgrade to purchase 2 set devices. The secondary BassPro LITE is still adjusted by them-self without extra Power / Single complex wires

Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassPro LITE employs high-pass filters and limiters that deliver exceptional at-the-limits performance.

Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design is not only Ultra-compact size, but the ALL IN ONE is combined elegant JBL industry design element and powerful acoustic performance.

Bass boost Volume Control
Bass boost Volume control is intergraded on I/O panel to let you adjust the sound freely

Technical Specifications
Driver Complement: super powerful 7”(178mm) Subwoofer
Amplifier Power: Class D, 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 15 A
Quiescent Current Draw: Input Sensitivity: 0.18 V – 5.0 V Low-
Level Input; 0.75 V – 20V High-Level Input
Crossover Frequency: 50 Hz – 150 Hz
Crossover Slope: 12 dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 10-1/4” x 8” x 2-9/16” (259.6mm x 203.1mm x 65.5mm)
Weight: 8 lbs (3.5kg)

What’s in the box
1x Under seat subwoofer
4x Screws
2x Wiring harness for power and speaker level input (300mm)
1x 15A Fuse

Retail: € 499,00

JBL JBL GEN3 Free JBL PartyBox 710 Pack6 104MIX

FREE JBL PartyBox 710 SPEAKER

8x Club 194T
8x Club 34F
8x Club 44F
8x Club 54F
8x Club 64FSL
8x Club 64
8x Club 64SQ
8x Club 64C
8x Club 64CTP
8x Club 64CSQ
8x Club 644F
8x Club 864F
8x Club 964M

Retail: € 12.424,00

JBL JBL GEN3 Free JBL Encore Pack4 36MIX

FREE JBL Encore SPEAKER

4x Club 194T
4x Club 34F
4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
4x Club 644F
4x Club 864F
4x Club 964M

Retail: € 3.780,00

JBL GEN3 Free JBL PartyBox 310 Pack5 52MIX

FREE JBL PartyBox 310 SPEAKER

4x Club 194T
4x Club 34F
4x Club 44F
4x Club 54F
4x Club 64FSL
4x Club 64
4x Club 64SQ
4x Club 64C
4x Club 64CTP
4x Club 64CSQ
4x Club 644F
4x Club 864F
4x Club 964M

Retail: € 6.212,00

JBL GEN3 Free JBL Charge Pack3 26MIX

FREE JBL Charge SPEAKER

4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
2x Club 194T
2x Club 34F
2x Club 644F
2x Club 864F
2x Club 964M

Retail: € 2.786,00

JBL GEN3 Free JBL Flip Pack2 16MIX

FREE JBL FLIP SPEAKER

4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP

Retail: € 1.832,00

JBL GEN3 Free JBL Wind3S Pack1 12MIX

FREE JBL WIND3S SPEAKER

4x Club 44F
4x Club 54F
4x Club 64

Retail: € 1.154,00

JBL Club GEN3 644F

4”x 6” (100mm x 152mm) Two-Way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 644F (4”x 6” (100mm x 152mm) Two-Way Car Speaker)
Power Handling: 40W RMS, 120W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 89,50

JBL Club GEN3 194T

3/4” (19mm) Edge-Driven Dome Tweeter


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 194T (3/4” (19mm) Edge-Driven Dome Tweeter)
Power Handling: 50W RMS, 150W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 3kHz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 69,50

JBL Club GEN3 964M

6”x9” (152mm x 230mm) Three-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 964M (6”x9” (152mm x 230mm) Three-way Car Speaker)
Power Handling: 85W RMS, 255W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 50Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 139,50

JBL Club GEN3 864F

6”x8” (152mm x 203mm) Two-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 864F (6”x8” (152mm x 203mm) Two-way Car Speaker)
Power Handling: 60W RMS, 180W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 65Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 99,00

JBL Club GEN3 64CSQ

6-1/2” (160mm) 2-way Component Speaker System


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.

Retail: € 219,50

JBL Club GEN3 64FSL

Shallow-Mount 6-1/2” (160mm) Two-Way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64FSL (Shallow-Mount 6-1/2” (160mm) Two-Way Car Speaker)
Power Handling: 55W RMS, 165W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 89,50

JBL Club GEN3 64CTP

6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64C & Club 64CTP (6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod)
Power Handling: 70W RMS, 210W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 169,50

JBL Club GEN3 64SQ

6-1/2” (160mm) 2-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.

Retail: € 139,50

JBL Club GEN3 64

6-1/2” (160mm) Two-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64 (6-1/2” (160mm) Two-way Car Speaker, Engineered For Better Sound Performance)
Power Handling: 60W RMS, 180W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 48Hz – 21kHz
Nominal Impedance: 3.0 ohms

Retail: € 109,50

JBL Club GEN3 64C

6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64C & Club 64CTP (6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod)
Power Handling: 70W RMS, 210W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 159,50

JBL Club GEN3 54F

5-1/4” (130mm) Two-Way Car Speaker


Pro Car Audio by JBL

Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits

Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.

Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.

Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.

Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.

Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.

Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.

Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.

I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.

Club 54F (5-1/4” (130mm) Two-Way Car Speaker)
Power Handling: 45W RMS, 135W peak
Sensitivity (@ 2.83V): 91dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 99,50

JBL Club GEN344F

4” (100mm) Two-Way Car Speaker


Pro Car Audio by JBL

Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits

Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.

Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.

Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.

Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.

Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.

Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.

Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.

I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.

Club 44F (4” (100mm) Two-Way Car Speaker)
Power Handling: 35W RMS, 105W peak
Sensitivity (@ 2.83V): 90dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 89,50

JBL Club GEN3 34F

3-1/2” (87mm) Two-Way Car Speaker


Pro Car Audio by JBL

Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits

Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.

Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.

Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.

Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.

Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.

Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.

Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.

Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.

I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.

Club 34F (3-1/2” (87mm) Two-Way Car Speaker)
Power Handling: 25W RMS, 75W peak
Sensitivity (@2.83V): 89dB
Frequency Response: 90Hz – 20kHz
Nominal Impedance: 3.0 ohms

Retail: € 79,50

JBL Concert PACK 4



CONCERT A704

STAGE1 621

STAGE1 9631

Retail: € 199,00

JBL Concert PACK 3


CONCERT A652
STAGE1 601c

Retail: € 159,00

JBL Concert PACK 2

1 x
CONCERT A704

2 x
STAGE1 621

Retail: € 199,00

JBL Concert PACK 1



CONCERT A652

STAGE1 621

Retail: € 149,00

JBL Concert PACK TRUNCK



Stage1 9631

Stage 122

Ne1212.2

Cke10

SI-E2Y Y-Adapter

Retail: € 299,00

JBL Concert PACK BASS8



Concert a652

Stage82

Ne0808.1

Cke10

Retail: € 199,00

JBL Concert PACK BASS10



Concert a652

Stage102

Ne1010.2

Cke10

Retail: € 219,00

JBL Concert PACK BASS12



Concert a652

Stage122

Ne1212.2

Cke10

Retail: € 239,00

JBL STAGE ONE-DER-FULL

110 x Stage141f + 10 free
110 x Stage151f + 10 free
110 x Stage161f + 10 free
110 x Stage19631 + 10 free

Buy 110 each - 440 sets total
Get 10 each for free (8,33% discount)

Retail: € 0,00

KENWOOD DRV-A501W

Wireless Link, GPS & G-sensor - RearCam input

3.0" color TFT LCD screen
Built-in Wi-Fi to view and forward recorded images on your phone
3-axis G-Sensor to adjust the angle of movement and acceleration information
GPS-Sensor to collect location and time of recording.
F1.6 sensitive lens with 126° (diagonal) wide viewing angle
Polarization filter included
Quad HD recordings (2560 x 1440px)
Micro SDHC/SDXC card slot (8 ~ 256GB), 16GB card included
Reverse Camera input / 2-channel recording
Free apps for PC and smartphone (IOS & Android) are available
Mounting bracket with quick coupling.
Parking mode with optional installation kit

3.0” Color LCD touch screen:
This compact DashCam has a bright and clear 3.0" widescreen LED color touchscreen for even more ease of use. On the screen, you can view the menus, adjust settings, adjust the high kw view, and process quality images.

3.7 Megapixel Wide Quad HD resolution:
With their 3.7 megapixel CMOS sensor, the DRV-A700W and DRV-A501W will shoot with Wide Quad HD resolution at 30 frames/sec (30fps). 2560x1440px (WQHD) is 1.8 times more than Full HD resolution. This results in not only movies with razor-sharp quality, but also beautiful photos of 16 Megapixels.

Wireless Smartphone Link (Wireless LAN):
The 'KENWOOD DASH CAM MANAGER ' application gives you the option to view the menu settings from your smartphone and adjust current images, and view stored videos or photos from the wirelessly linked DashCam. If you save the video and/or video files on your smartphone, you can view the images with map view from Google Maps including GPS information (such as speed, the direction of travel, ....). You can edit the images and share them on your social media. KENWOOD DASH CAM MANAGER for your smartphone is available on the App Store (iOS) or Google Play (Android).

HDR (High Dynamic Range):
This camera uses 30 frames per second to form a video recording. With the HDR technique, you will record these 30 images per second with different exposures and combine them to improve the contrast ratio. This gives you an optimally exposed image when driving in and out of a tunnel, for example, with much higher brightness and more intense contrast.

3-axis G-Sensor and GPS receiver:
Thanks to the 3-axis gyroscopic sensor (G-sensor), your dashcam can register physical movements, for example when you brake suddenly or in the event of an accident/impact. In that case, the recorded images are saved in a separate folder, so that they cannot be overwritten afterward.
While driving, certain physical forces act on your camera. These G-sensor data (force, direction,..) are processed in the video recording and saved together with the data from the built-in GPS receiver (coordinates, speed, date & time, ...). With 'KENWOOD VIDEO PLAYER' you can see on a map (Google Maps) where and when the recordings took place and which direction of travel, speed, power, ... were applicable at that time.

Smart parking mode:
Use your dashcams as parking security. While your car is parked and the 3-G sensor detects physical movement from your vehicle, the camera will start recording for 30 seconds and then return to standby mode. Here too, the recorded images are saved separately, so that they are not overwritten afterward.
The optional connection kit CA-DR1030 is necessary to have a permanent power supply.

Super Capacitor ( Backup Battery):
The built-in 'super capacitor' ensures that in the event of a power failure, the DashCam correctly closes and saves the current video recording before the camera switches off completely.

< strong>2 system mounting bracket:
A suction cup and adhesive mounting bracket are included. The suction cup gives you more freedom to easily place and remove the mounting bracket where the self-adhesive one provides a more solid attachment.

Magnetic quick coupling:
The new, super handy, magnetic attachment mechanism ensures that you can install and remove the DashCam with one hand. The wiring is connected to the mounting bracket on the windshield! So you only (dis)connect the camera without having to disconnect the wiring again.

Included polarization filter — Reduces the reflection on the windscreen —
Included with the DRV-A700W/ DRV-A601W/ DRV-A501W is a polarizing filter. A pole filter consists of two parts, a part that you screw onto the screw thread of the lens and a rotating ring. By turning the rotating ring you can adjust the angle of incidence of light. This reduces disturbing reflections on your windscreen.

Front & Rear 2 Camera Recording:
By connecting the optional rearview camera KCA-R100 to the DRV-A700W or DRV-A501W, you can simultaneously record what is happening in front of and behind the car when tailgating is going on to collisions with the front or rear of your car in smart parking mode. The KCA-R100 has a lens with a wide viewing angle of 161° that 180° can be rotated vertically. When the KCA-R100 is connected to the DRV-A700W or the DRV-A501W, it will record 2 different video files in Full HD resolution.

16GB MicroSD card included:
16GB Class-10 microSDXC Flash memory card included.

Retail: € 159,00

KENWOOD KFC-PS5796C

PERFORMANCE STANDARD SERIES, 5"x7" Custom Fit 3-way 2-Speaker System.

2-Way - 2-Speaker System
Diamond Array Pattern, Polypropylene woofer Diaphragm
Rubber Surround
30mm Balanced Dome Tweeter
320W Peak Input Power
Accoustic Sound Harmonizer
Sound Field Enhancer
0,3m speaker cord included

Retail: € 79,99

KENWOOD KFC-S1056

10cm, Stage Sound Series, Double Cone Speaker System - 4Ω - 220W Max - 21W RMS.

'Stage Sound' series
Built-in loudspeaker
10 cm Polypropylene cone
Heavy powerful woofer magnet
Double-cone speaker system
220W peak power
21W rated power

Retail: € 39,99

KENWOOD KFC-PS1096

PS Series 10cm Coaxial 2 Way Speaker System - 4Ω - 220W Max - 50W RMS.

10cm, coaxial 2-way 2-speaker system
Polypropylene cone with diamond pattern
Iron frame with rubber suspension
30mm Balanced dome tweeter
220W Peak power
Acoustic Sound Harmonizer
Sound Field Enhancer
Half meter connection cable included
Protective grille included

Retail: € 79,99

KENWOOD KDC-BT560DAB

CD/USB Receiver DAB+, Bluetooth, Amazon Alexa.

Enjoy convenient operation. Crystal clear digital radio DAB+. Built-in Bluetooth technology for hands-free calling and music streaming, the ability to use your smartphone as a wireless remote control, and interactions with Amazon Alexa's cloud-based voice service. The digital sound processor, Time Alignment and 13-band EQ ensure optimal sound adjustments.

DAB+ Digital radio, analogue FM radio with RDS functionality and AM radio reception.
Bluetooth technology for safe hands-free calling or music streaming
Turn your smartphone into a remote control with the 'KENWOOD Remote' application.
Enjoy audio streaming just by switching among 5 connected BT devices with Music Mix.
Amazon Alexa cloud based voice service support
MP3 / WMA / AAC / WAV / FLAC music playback
Ultimate sound image can be set by means of the built-in DSP and its DTA, 13-band EQ, X'over, ...
1x RCA(cinch) line output (rear/subwoofer (switchable)) of 2.5V
Wide 1.5 line LCD display with high contrast, wide viewing angle & variable-color backlight.
Menu language in English (default), Russian, Spanish, French or German.
1DIN CD/USB car radio. Crystal clear radio reception with the integrated DAB+ tuner. Built-in Bluetooth technology for safe hands-free calling and music streaming. Support MP3/WMA/AAC/WAV/FLAC music files. The sound settings can be optimally adjusted with the integrated DSP/DTA and 13-band EQ. Features 2 RCA preouts (2.5), AUX input and the option to continue using your original steering wheel controls with an optional interface. You can adjust the variable lighting to your personal preference. Supports Amazon Alexa virtual assistant.

Retail: € 219,99

KENWOOD KDC-BT665U

1-DIN Radio from the KDC series

Built-in Bluetooth module 4.2 and Audio Streaming (A2DP, AVRCP)

Suitable for: CD, USB, WMA, MP3, AAC, FLAC (24 bit - 96 kHz)

· Suitable for Apple iPhone / iPod and Android devices

· iPod/iPhone Direct Control (Kenwood KCA-IP103 required)

Kenwood Smartphone APP remote for easy operation

Multicolour keys and display, fully customizable

· High contrast display with wide viewing angle

· Detachable front panel

Dark Current Consumption, Extremely Low Power Consumption (ECO)

Power: 4 x 50 watts MAX (MOSFET)

2 x 2.5 Volt RCA Pre-outs, Front, Rear or Subwoofer (switchable)

· Balance / Fader / Loudness settings

Sound Reconstruction

· High and Low Pass Filter

· Integrated DSP, DTA and 13 Bands Graphic Equalizer

· Bass Boost circuit

Radio Data System

· Radio Text Plus

· FM and AM (MW & LW) receiver

Number of presets: 24 (18 FM / 3 MW / 3 LW)

FM range: 87.5 MHz - 108 MHz (50 kHz steps)

MW range: 531 kHz - 1611 kHz (9 kHz steps)

LW range: 153 kHz - 279 kHz (9 kHz steps)

· Number of channels: 24 (18x FM / 6x AM)

· Device can be fully operated with the free Kenwood Remote APP

· Android Open Accessory Support (AOA, version 2)

· USB charging current: 1.5 Amps

· Supplied with external microphone

· You buy from an authorized and official Kenwood dealer

· Device comes with a 3-year warranty!



Bluetooth specifications:

· Built-in Bluetooth module 4.2

· Up to 10 registered phones

· Connecting 2 phones at the same time, reachable on two phones at the same time

HD Voice Control

Hands Free Profile v1.7.1 (HFP)

Serial Port Profile (SPP)

Advanced Audio Distribution Profile (A2DP)

Audio/Video Remote Control Profile v1.5 (AVRCP)

Phonebook Access Profile (PBAP)



Connections:

USB connection on the front

· AUX connection on the front

· Factory steering wheel control connection

DC Cable (from Molex to ISO)

· Control wire for automatic antenna or amplifier

· 2-Way (tel/navi) noise reduction

· FM antenna connection

· External microphone input

Retail: € 169,99

KENWOOD KFC-1653MRW

16cm, coaxial 2-way - 4Ω - 150W Max - 50W RMS

2-way 2 speaker system
160mm water resistant polypropylene cone
25mm balanced dome tweeter
Specially designed for outdoor use or in damp conditions
UV resistant protection grille

Speaker/Woofer Specifications
Cone material Injection molded polypropylene cone
Injection molded plastic resin speaker frame/basket
Material cone suspension Santoprene
Sensitivity 86dB/W/m
Frequency range 60Hz ~ 20000Hz
Impedance 4Ω
Dimensions (WxHxD) 176 x 176 x 89.3mm
Minimum mounting depth 61.5mm
Mounting opening diameter 130mm
Gross Weight 1922gr

Retail: € 119,99

KENWOOD DPX7300DAB

CD/USB/DAB+/BLUETOOTH/ALEXA

CD/USB receiver with DAB+ digital radio, Bluetooth technology and Amazon Alexa voice service. Enjoy convenient control. Crystal clear DAB+ digital radio. Built-in Bluetooth technology for hands-free calling and music streaming, the ability to use your smartphone like a wireless remote, and interactions with cloud-based voice service Amazon Alexa. The Digital Sound Processor, Time Alignment & 13-Band EQ provide optimal sound tuning enhancements.


Features:

- Dab+ Digital Radio, Analog Fm Radio With Rds Functionality And Am Radio Reception.
- Bluetooth Technology For Hands-Free Calls And Music Streaming.
- Use Your Smartphone With The Kenwood Remote App Like A Wireless Remote Control.
- Enjoy Streaming Audio By Easily Switching Between 5 Connected Bt Devices With Music Mix
- Ready For The Cloud-Based Voice Service Amazon Alexa.
- Playback Of Mp3/Wma/Acc/Wav/Flac Music Files.
- Digital Sound Processor, Delay Adjustment And 13-Band Eq For Optimal Sound Tuning Improvements.
- 3 Powerful (2.5 V) Rca Preamplifier Outputs For Connecting Multiple Power Amplifiers.
- Large 3-Line Lcd Display With High Contrast, Wide Viewing Angle And Variable Color Backlight.
- Menu Language In English (Default), Russian, Spanish, French Or German.


Specifications:

Connectivity:
- Bluetooth: Yes
- Housing Features / Functions
- Double-Din Monitor: Yes

Ports:
- Front Aux-In: Yes
- Aux-In: Yes
- Headphone Jack: Yes
- Usb: 2.0
- Ipod Connection: Optional

Equipment:
- Radio: Yes
- Cd Player: Yes
- Handsfree Function: Yes

Display:
- Display: Lcd
- Background Colour: Multi-Colour
- Illuminated Keypad: Multi-Colour

Radio:
- Dab+: Yes
- Wave Range: Fm / Am / Lw
- Preset Station Memory: 6
- Radio-Data-System (Rds): Yes

Playback Media:
- Cd-R: Yes
- Cd-Rw: Yes
- Output / Sound Characteristics
- Music Power Output (Watts): 4 X 50

General:
- Width (Mm): 182
- Height (Mm): 111
- Depth (Mm): 158
- Weight (Kg): 1,7

Playback Format Audio:
- Aac: Yes
- Flac: Yes
- Mp3: Yes
- Wav: Yes
- Wma: Yes



Kenwood DPX7300DAB Radio MP3 Player Bluetooth is available in different sizes and colors. If you are interested in purchasing Kenwood DPX7300DAB Radio MP3 Player Bluetooth from your online electronics and computers store techinn, do not hesitate any longer and received it at home in a few days. At techinn you can find the lowest price guarantee for products of electronics and computers gear from the brand Kenwood.

Retail: € 269,99

KENWOOD DRV-A100

HD DashCam with integrated 2.0" LCD & G-sensor

DashCam with 1 megapixel HD resolution • 2" color screen • G-sensor • Expandable to smart parking mode • Suction cup or self-adhesive mounting bracket • Including 16GB microSD card •

Main Features
2.0" color TFT LCD screen
3-axis G-Sensor to collect motion angle and acceleration information
F2.4 clear lens with wide 125°(diagonal) viewing angle
HD recordings (1280 x 720px)
Micro-SD card slot (8 ~32GB), 16GB card included
Free PC/MAC application available
To glue or with suction cup holder
Parking mode with optional installation kit

Dashboard camera
Image sensor 1/4 CMOS
Lens type F2.4 Fixed focus lens
Field of view D: 125°
Field of view H: 110°
Field of view V: 52°
LCD screen 2.0" full color TFT
Recording resolution HD (1280 x 720) image resolution (1.0M max)
Incident recording mode Yes
Continuous recording 1min(default), 3min or 5min files
Manual recording function Yes
Frame Rate 30 fps (default)
Photo format JPEG
Photo size 1280 x 720 Pixels
Video recording format MPEG / AVI
Audio file type Linear PCM
G-Sensor Sensitivity -4G to +4G (0.1G steps)
Parking mode With optional connection kit (CA-DR1030)
Recording media micro SDHC Class 10
Maximum recording media size from 4GB to 32GB
Menu language EN/DU/FR/NL/IT/SP/PT/RU/PL/CZ/RO
Operating voltage 5 VDC
Power consumption 280 mA
Dimensions 54 x 58 x 37mm
Weight 46 gr (only the camera)
PC application KENWOOD DASH CAM MANAGER (PC & MAC)
USB port type mini USB-B type
Audio-video output 2.5mm jack

Retail: € 69,99

KENWOOD DMX8021DABS

Bluetooth wireless Android Auto & Apple Carplay

The successor to the DMX8020, one of the most popular devices of the past 2 years, is ready: the DMX8021DABS. Very competitively priced and equipped with almost everything that is desired today from a car radio, works with Apple Carplay & Android Auto and even Wireless thanks to built-in WiFi, also equipped with a small installation depth due to the shortened chassis.

Kenwood DMX8021DABS

7 inch WVGA capacitive touch screen panel
Apple Carplay wireless WiFi (wired via USB or wireless)
Android Auto wireless WiFi (wired via USB or wireless)
Android True Mirroring (wired via USB or wireless)
DAB+ Digital radio & AM / FM tuner
1x high speed USB connection at the back
Bluetooth audio and hands-free
3x RCA output 5.0 Volts
13 band equalizer, DSP & RTA
R-cam rear view camera connection (with parking lines)
3 camera connections in total
Built-in ISO plug connection
Supports High Res Audio
Short Chassis or low installation depth 75 mm
2 + 1 year warranty (after registration via Kenwood.nl)

Retail: € 779,99

KENWOOD DNX7190DABS

7.0" WVGA AV Navigation System, DAB+ ,USB & Bluetooth.

The 7.0 inch WVGA touch screen of the DNX7190DABS delivers vibrant colors with high contrast and sharpness. Enhanced USB connections for Apple CarPlay & Android Auto make life easy.

Main Features
Bright 7.0" WVGA resistive touch display with vivid and dynamic detail.
Integrated digital radio DAB+ receiver for interference-free radio reception.
Integrated Bluetooth technology for hands-free calling and audio streaming.
Supports Apple CarPlay™ via USB
Supports "Spotify" application to control Spotify directly with your receiver.
Optimal sound settings with the integrated DSP, X'over, DTA, 13-band EQ, ...
Up to 3 cameras can be connected to increase your driving comfort and safety
Advanced DashCam link for optional DRV-N520 dash cam
Roulez en toute sérénité avec système de navigation embarqués de Garmin.
5 year free trial of KENWOOD Traffic Powered By INRIX™
AV input / AV output / 2 camera inputs for maximum convenience, flexibility and security.
3 RCA high power (4.0V) line outputs (front/rear/subwoofer channel)
Supports high resolution audio files including FLAC (192kHz/24bit)

Audio Properties
max. Output power (MOSFET Power IC) 4 x 50W
Line Out(s) 3 RCA: Front / Rear / Subwoofer
Line output signal level 4V
Volume Correction Yes
Dual zone function Yes
Balance & Fader Control Yes
Sound attenuation (-20dB) with smooth volume return Yes
Number of equalizer bands Yes, 13 band graphic equalizer
Built-in Digital Sound Processor (DSP) Yes
Digital Time Alignment (DTA) Yes
Confirmation tone for each key operation (On/Off) Yes

Retail: € 1.199,99

KENWOOD DNX9190DABS

6.8" HD AV Navigation System with DAB+ radio, WiFi, USB & Bluetooth.

The DNX9190DABS's 6.8-inch high-definition touch screen delivers vibrant colors with high contrast and sharpness. It features an all-new electrostatic capacitive touch screen and HD LCD panel, with white backlight and high brightness. Wireless connections with Apple CarPlay and Wireless Mirroring for Android™, access maps, phone, music and messages right from your phone, without the need for cables.

Integrated WiFi for wireless smartphone connections.
Razor-sharp 6.8" XVGA (HD) capacitive touch screen with vivid and dynamic detail reproduction.
Integrated digital radio DAB+ receiver for interference-free radio reception.
Integrated Bluetooth technology for hands-free calling and audio streaming.
Support Apple CarPlay™ & Android Auto™ via USB connection.
Supports "Spotify" application to control Spotify directly with your receiver.
Optimal sound settings with the integrated DSP, X'over, DTA, 13-band EQ, ...
Up to 3 cameras can be connected to increase your driving comfort and safety
Advanced DashCam link for optional DRV-N520 dash cam
Garmin navigation system integrated. Supports GPS & GLONASS.
Map Care, for 3 years of map updates, included.
AV input / AV output / 2 camera inputs for maximum convenience, flexibility and security.
3 RCA high power (5.0V) line outputs (front/rear/subwoofer channel)
Supports high resolution audio files including FLAC (192kHz/24bit)

Audio Properties
max. Output power (MOSFET Power IC) 4 x 50W
Line Out(s) 3 RCA: Front / Rear / Subwoofer
Gold-plated RCA connectors Yes
Line output signal level 5V
Volume Correction Yes
Dual zone function Yes
Balance & Fader Control Yes
Sound attenuation (-20dB) with smooth volume return Yes
Number of equalizer bands Yes, 13 band graphic equalizer
Built-in Digital Sound Processor (DSP) Yes
Digital Time Alignment (DTA) Yes
Confirmation tone for each key operation (On/Off) Yes

Retail: € 1.599,99

KENWOOD DMX7722DABS

Mid-end 2-DIN Multimedia system with short body 75mm

Completely IN-HOUSE developed and produced "Made in Japan"
6.8” Capacitive touchscreen display
Built-in Wi-Fi for wireless Android Auto (wireless or USB)
Built-in Wi-Fi for wireless Apple CarPlay (wireless or USB)
Integrated FM | DAB+ tuner for crystal clear sound reproduction
USB-A connection for super fast charging of the smartphone (5V | 1.5A)
3 pairs of RCA connectors (2.5V) | 13 band EQ | DSP | DTA
Integrated Bluetooth technology for calling and streaming audio
Active connection for 2 mobile phones at the same time (private | business)
1 rear-view camera connection including parking aid lines

Retail: € 679,99

KENWOOD KMR-M508DAB

USB - iPhone - Bluetooth - 2x RCA (2.5V) - DAB+ - DSP/DTA - 13 band EQ

Marine Digital Media Receiver with Digital radio DAB+, Bluetooth technology & Amazon Alexa voice service.
Enjoy convenient operation. Crystal clear digital radio DAB+. Built-in Bluetooth technology for hands-free calling and music streaming, the ability to use your smartphone as a wireless remote control, and interactions with Amazon Alexa's cloud-based voice service. The digital sound processor, Time Alignment and 13-band EQ ensure optimal sound adjustments.

- Integrated DAB+ radio provides you with a wide range of digital channels in crystal clear quality
- Integrated Bluetooth technology for hands-free calling and audio streaming.
- Capable of playing MP3, WMA, AAC, WAV & FLAC audio files.
- Ultimate sound image can be set by means of the built-in DSP and its DTA, 13-band EQ, X'over, ...
- Support 'KENWOOD Remote' App & 'Music Mix' function.
- Amazon Alexa cloud-based voice service ready
- Wide 1.5 text line with 13 characters, positive LCD display.
- Adjustable RGB LED backlight
- User interface language selection: English, Russian, French, Spanish & German.
- 2x RCA(cinch) line outputs (front + rear/subwoofer (switchable)) of 2.5V
- Improved moisture resistance due to conformal coated PCB

Retail: € 179,99

KENWOOD KMM-BT508DAB

USB - iPhone - Bluetooth - 2x RCA (2.5V) - DAB+ - DSP/DTA - 13 band EQ - Vario colors

Digital Media Receiver with Digital radio DAB+, Bluetooth technology & Amazon Alexa voice service.
Enjoy convenient operation. Crystal clear digital radio DAB+. Built-in Bluetooth technology for hands-free calling and music streaming, the ability to use your smartphone as a wireless remote control, and interactions with Amazon Alexa's cloud-based voice service. The digital sound processor, Time Alignment and 13-band EQ ensure optimal sound adjustments.

- DAB+ Digital radio, analogue FM radio with RDS functionality and AM radio reception.
- Bluetooth technology for safe hands-free calling or music streaming
- Automatically switches between the 2 actively paired phones for incoming calls.
- Turn your smartphone into a remote control with the 'KENWOOD Remote' application.
- MP3 / WMA / AAC / WAV / FLAC music playback
- DSP, DTA and 13-Band EQ for optimal sound tuning enhancements.
- 2 high power (2.5V) RCA pre-outs to connect multiple power amplifiers.
- Wide 1.5 line LCD display with high contrast, wide viewing angle & variable-color backlight.
- Menu language in English (default), Russian, Spanish, French or German.
- Short housing (100mm) for easy installation

The sound settings can be optimally adjusted with the integrated DSP/DTA and 13-band EQ. Features 2 RCA preouts (2.5), AUX input and the option to continue using the original steering wheel controls with an optional interface. You can adjust the variable lighting to your personal preference. Supports Amazon Alexa virtual assistant.

Retail: € 189,99

KENWOOD KMM-BT408DAB

USB - Bluetooth - 1x RCA (2.5V) - DAB+ - DSP/DTA - 13 band EQ

Digital Media Receiver with Digital radio DAB+ & Bluetooth technology.
Enjoy convenient operation. Crystal clear digital radio DAB+. Built-in Bluetooth technology for hands-free calling, music streaming and the ability to use your smartphone as a wireless remote control. The digital sound processor, Time Alignment and 13-band EQ ensure optimal sound adjustments.

- DAB+ Digital radio, analogue FM radio with RDS functionality and AM radio reception.
- Bluetooth technology for safe hands-free calling or music streaming
- Automatically switches between the 2 actively paired phones for incoming calls.
- Turn your smartphone into a remote control with the 'KENWOOD Remote' application.
- AUX connection & illuminated USB connection with dust cover
- MP3 / WMA / AAC / WAV / FLAC music playback
- Ultimate sound image can be set by means of the built-in DSP and its DTA, 13-band EQ, X'over, ...
- Wide 1-line LCD display with high contrast, wide viewing angle and white LED backlight.
- User interface language selection: English, Russian, French & Spanish.
- Short housing (100mm) for easy installation

1DIN mechaless USB car radio. Crystal clear radio reception with the integrated DAB+ tuner. Built-in Bluetooth technology for safe hands-free calling and music streaming. Support MP3/WMA/WAV/FLAC music files. The sound settings can be optimally adjusted with the integrated DSP/DTA and 13-band EQ. Has 1 RCA preout (2.5), AUX input and the option to continue using the original steering wheel controls with an optional interface. With the KENWOOD Remote App, available in App store & Play store, your smartphone becomes a wireless remote control.

Retail: € 179,99

KENWOOD KMM-BT309

USB - iPhone - Bluetooth - 3x RCA (2.5V) - DSP/DTA - 13 band EQ - Vario colors

Digital media receiver with Bluetooth technology for hands-free calling and music streaming.
Listen to your favorite radio broadcasts, CDs or music stored on a USB stick. With built-in Bluetooth technology for safe hands-free calling or music streaming and the ability to use your smartphone as a wireless remote control with the 'KENWOOD Remote' App. The digital sound processor with digital time alignment and 13-band EQ ensure an optimal sound experience.

- Bluetooth technology for safe hands-free calling or music streaming
- Automatically switches between the 2 actively paired phones for incoming calls.
- Enjoy audio streaming just by switching among 5 connected BT devices with Music Mix.
- Turn your smartphone into a remote control with the 'KENWOOD Remote' application.
- MP3 / WMA / AAC / WAV / FLAC music playback
- Ultimate sound image can be set by means of the built-in DSP and its DTA, 13-band EQ, X'over, ...
- 3 high power (2.5V) RCA preouts to connect multiple power amplifiers.
- Wide 1.5 line LCD display with high contrast, wide viewing angle & variable-color backlight.
- Menu language in English (default), Russian, Spanish, French or German.
- Short housing (100mm) for easy installation

1DIN mechaless USB car radio. Built-in Bluetooth technology for safe hands-free calling and music streaming. Support MP3/WMA/AAC/WAV/FLAC music files. The sound settings can be optimally adjusted with the integrated DSP/DTA and 13-band EQ. Features 3 RCA preout (2.5), AUX input and the option to continue using the original steering wheel controls with an optional interface. You can adjust the variable lighting to your personal preference. With the KENWOOD Remote App, available in App store & Play store, your smartphone becomes a wireless remote control.

Retail: € 129,99

NEED HELP?

WhatsApp Call me back