Go to all products

Products per page: 10 | 20 | 50 | 100 | All

JBL Marine & Powersports Rallybar XL

 
 
JBL RALLYBAR XL is a IP66 rated water resistant Bluetooth® Soundbar with 300Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation.

Each RALLYBAR XL can be used by itself or connected to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode.

The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements.

Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.

* Transducers 8x 2.75”(70mm) woofers, 2x 1”(25mm) Tweeters, 4 x 7.2"(182.8mm) x3"(76.2mm) Racetrack Passive Radiators
* Output Power 300WRMS, 600W PEAK (IEC60268)
THD at Rated RMS Power < 1%
* Voltage Range: 9.6 - 16VDC
* Quiescent Current Draw < 0.9A
* Maximum Current Draw 40A
* Frequency response 45Hz-40kHz
* Signal-to-noise Ratio > 80 dB
* Cable type 10 AWG
* Cable length 12 Feet (3.66m)
* Bluetooth® Version 5.3
* Bluetooth® profile A2DP V1.3, AVRCP V1.6
* Bluetooth® transmitter frequency range 2400 MHz – 2483.5 MHz
* Bluetooth® transmitter power ≤ 15 dBm (EIRP)
* Aux-In 2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
* Aux-Out 2 Vrms (3.5 mm connector)
* USB format FAT16, FAT32
* Soundbar Dimension (L x W x H) 35-11/32" x 5" x 4-5/8" (897.5 x 126.7 x 118mm)
* Soundbar Weight 20.83 lbs (9.45 kg)
* Packaging dimensions (W x H x D) 38.2" x 9" x 7.6" (971 x 229 x 193mm)
* Gross weight 27.5 lbs (12.52 kg)

Retail: € 1.299,00

JBL Club GEN3 64SQ

6-1/2” (160mm) 2-way Car Speaker


Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.

Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.

Retail: € 139,50

JBL STAGE ONE-DER-FULL

110 x Stage141f + 10 free
110 x Stage151f + 10 free
110 x Stage161f + 10 free
110 x Stage19631 + 10 free

Buy 110 each - 440 sets total
Get 10 each for free (8,33% discount)

Retail: € 0,00

NEED HELP?

WhatsApp Call me back