producten - HANDELSONDERNEMING NEESKENS B.V.

Vibe BassPack Vibe Slick Pack8

Subwoofer incl Amp Pack

Retail: € 249,00

Blaupunkt Amsterdam 290 BT

1 DIN - BLUETOOTH

SPECIFICATIONS
Radio
Blaupunkt High Grade Tuner
FM (RDS), AM Tuner

Data carrier
USB, SD, SDHC (up to 32 GB)

Media player
Audio from USB/SD
Audio formats: > 15 different

Made for iPhone

Smartphone Mirror Mode
For iPhone and Android Phones

Bluetooth
Bluetooth Modul built-in (HFP, PBAP, A2DP, AVRCP)
Phone book access
External microphone

Inputs / Outputs
1x rear USB
1x rear Aux-In
1x front SD card slot
Steering wheel control (SWC programmierbar)

Equalizer / Amplifier
7-band equalizer
Sound presets (Rock, Pop, Classic, Jazz, Vocal)
4-channel pre-amplifier (2V)
Sub-Out
4 x 50-Watt Max. power

General
Fix Frontpanel
Permanent memory
Short radio body
IR remote control included
External BT-microphone included

ANALOG RADIO
Type of tuner: Blaupunkt High Grade Automotive Tuner
Wave bands: FM 1, 2, MW, LW
Radio Data System: Alternative Frequency (AF), Clock Time (CT), Programme Service Name (PS), Program Types (PTY), Regional Programme (REG), Traffic Announcement (TA), Traffic Program (TP)
Travelstore: Yes (FMT)
Band Scan / Preset Scan: Yes / Yes
Station memory: 30
Sensitivity: lo / dx
Interfrence suppression: Yes
Frequency response (Hz) -3 dB: 30 – 15.000

BLUETOOTH
Supported Version: Bluetooth 2.1 mit EDR
Supported profiles: HFP, PBAP, A2DP, AVRCP
Pairing (number of devices): 1
Pairing code: Auto pairing
Hands-free calling: Via external micro + radio speakers
Microphone: External (rear connection)
Key functions: Accept / hang up / reject call / redail
Phone book access: Yes (up to 1.000 entries by phone)
Twin Connect: No
Navigation Audio Mix: No
Auto Wake-Up: No

DATA CARRIER
USB: USB 2.0
Memory cards: TF Card, SD (up to 32 GB)
Formatting USB / SD: FAT 32, FAT 16
Made for iPhone: Yes

MEDIA-PLAYER
Playback file fromats: AVI, MKV, MP4, MOV, 3GP, MPEG, MPG, DAT, VOB, WMV, FLV, RMVB, RMV, TS, MP3, WMA, AAC, WAVE, FLAC, APE
Titel display: ID3-Tag (Version 2), file/folder
Folder- & file browsing: Yes
Multi-Folder Level from MSD: Yes
iPod, iPhone control: Yes (Auto-Link)
Fast list browsing: Yes
Display modes: Yes (file, folder, song, artist, album, clock, elapsed time, total time, all mode)
Display of characters: File up to 50 / ID3 up to 30
Variable display scrolling: Yes (once / always if > 14 digits)
Mix / Repeat / Scan: Yes / Yes / No
Fast media reading: Yes (from USB, TF,SD Card)
Number of supported files: > 30.000 from MSD
Bitrate (kBit/s): 32 -320
Variable Bitrate: Yes

EQUALIZER
Number of bands: 7
Frequeny ranges: 62.5 Hz/ 160 Hz/ 400 Hz/ 1 kHz/ 2.5 kHz/ 6.3 kHz/ 16 kHz
Bass / Treble: No
Balance / Fader : Yes / Yes (+/- 12 stages)
X-Bass: No
Sound Presets: Rock, Pop, Classic, Jazz, Vocal

Amplifier
Number of channels: 4
Max. power: 4 x 50 Watt
Sinus power at 14.4 V: 4 x 24 Watt (DIN 45324)

DISPLAY
Type: TFT TTL 24 bits
Angle: Wide-view
Brightness: Adjustable
Clock display: 24 / 12 hrs

SMARTPHONE MIRROR MODE
iPhone: Yes
Android Phone: Yes (with APP on smartphone)

INPUTS
Antenna (number of): 1 (FM ISO)
USB (number / type: 1 (rear /standard A-type)
iPod/iPhone: Yes (rearUSB)
Memory cards: Yes
Aux-In (number of, type): 1 (rear, RCA)
Steering wheel control (SWC): Yes (analog, 3.5 mm jack, programmable)

OUTPUTS
Speaker (number of): 4
Pre-amplifier channel: 4 (Cinch)
Pre-amplifier (voltage): 2 Volt
Variable amplifier delay time: No
Sub-Out: Yes (Cinch, var. gain / frequency)

GENERAL
Software Update: via USB
Menu language: English, German, Spanish, French, Italian, Dutch, Russian, Portuguese, Polish, Czech, Hungarian, Finnish
Variable Scan-time: No
Confirmation-beep: Yes (on/off)
Front panel: Fix-panel
Panel color / decor-ring: Black / black
Encoder / key illumination: Blue / blue
Permanent preset storage: Yes
Demo-Mode: No
Weight (kg): ca. 1,1
Dimension (mm): 178 x 100 x 130 (W x H x D)
IR remote control: Yes (included in delivery)
External BT microphone: Yes (included in delivery)

Retail: € 229,00

Vibe SLICKC10A-V0

Active Underseat Subwoofer

The all new SLICK C10 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.

This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.

We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.

The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.

Model – SLICKC10A-V0
Driver  – SLICK10S
Type  – Active bass enclosure
Peak/RMS Power  – 540W/180W
Impedance  – 4Ω
Dimensions (H x W x D)  – 2.9” x 10.2” x 13.6”  (73mm x 260mm x 345mm)
Configuration  – 2nd order acoustic suspension
Enclosure Type  – Slim Fit Bass Enclosure
• Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
• Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
• 0° / 180° Phase shift control.
• Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
• Low and high level input allows easy connection to both factory systems or aftermarket headunits.

Retail: € 219,99

Vibe SLICKV12-V2

1200 Watts Passive Bass Subwoofer Enclosure

Unique Amplifier Docking System allows easy fitment of the Powerbox 400.1M.
Ported enclosure delivers higher SPL and boosted bass response.
Hybrid vent incorporating a slot port and flared turbo ports.

Model: SLICK12V-V2
Driver: SLICK12
Type: Passive bass enclosure
Peak Power: 1200 Watts
RMS Power: 400 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 21.6″ x 11.3″ (355mm x 550mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure

Recommended Amplifier: POWERBOX400.1M-V7 (not included)

Retail: € 219,99

Vibe SLICKCBR12-V7

12″ High Output Bass Enclosure Enclosure


Designed to work with Powerbox 400.1M
Unique port design for extended low frequency response
The new Vibe Slick CBR enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.

1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure

Retail: € 229,99

Vibe VSAWK8-V1

8 AWG Slick Amp Wiring Kit

• 8 AWG CCA Power and Earth cable
• RCA, Remote, Power. Earth and Fuse Holder included
• Gold Plated connections

SPECIFICATIONS

• 5m 4AWG power cable
• 1m 4AWG ground cable
• 5m RCA interconnect
• 5m remote turn on wire
• 2 x 5m 16AWG speaker cable
• ANL fuse holder
• 60 amp ANL fuse

Retail: € 49,95

Vibe OPTISOUNDBMW4X-V0

Optisound 4 Inch BMW Plug and Play Component Speaker

OPTISOUNDBMW4x-V0 Car Specific Component
2-way, 4” (100mm)
115 watts RMS
345 watts Peak
55 watts Minimum input
Sensitivity 90dB
Frequency response 55Hz – 25kHz
Impedance 4Ω
Recommended amplifier: POWERBOX65.4M-V7

==================

Direct Replacement Front door speakers
BMW adaptors and cables included
OEM Upgrade

Easiest plug & play installation due to car-specific baskets and harnesses,

High-end crossover with reference curve setup, System can be used as passive or semi-active system

1-series

F20 5-door 2011 – Front door

F21 3-door 2011 – Front door

F40 5-door From 2019

2-series

F22 Coupe 2011 – Front door

F23 Convertible 2011 – Front door

F44 Grand Coupe From 2020

F45 Active Tourer From 2014

F46 Gran Tourer From 2015

F87 M2 Coupe From 2015

3-series

F30 Sedan 2012 – Front door / rear door

F31 Touring 2012 – Front door / rear door

F34 Gran Turismo 2013 – Front door / rear door

F35 Sedan Long Version 2012 – Front door / rear door

F80 M3 2014 – 2018

G20 Sedan Coupe From 2019

G21 Touring From 2019

4-series

F32 Coupe 2014 – Front door / rear door

F33 Convertible 2014 – Front door

F82 M4 Coupe From 2014

F83 M4 Convertible From 2014

5-series

G30 Sedan From 2017

G31 Touring From 2017

6-series

F12 Convertible 2011 – Front door / rear door

F13 Coupe 2011 – Front door / rear door

G32 Gran Tourismo From 2017

i8

L15 Roadstar From 2013

X1

F48 SUV From 2015

F49 SUV Long Version From 2015

X2

F39 SUV From 2018

X3

F25 SUV 2010 – Front door / rear door

F26 SUV From 2014

G01 SUV From 2017

X4

F26 SUV 2014 – Front door / rear door

G02 SUV From 2018

MINI

F54 Clubman 2. gen. From 2015

F55 5-door From 2014

F56 3-door From 2014

F57 Convertible From 2016

Retail: € 174,95

Vibe POWER-AIR-P8

Vibe BLACKAIRP8-V6

BlackAir Wheel Well Triple 8 Inch Passive Radiator Subwoofer Enclosure

● Unique design passive radiator technology.

● Unique mounting system allows mounting in most wheel arches to maximize space.

● Dual 4 Ohm voice coil configuration.

● Steel mesh grilles protect the woofer and passive radiator from possible damage.

● With spring-loaded clamps that can be used to connect heavy cable.



Specifications

●Model: BLACKAIRP8-V6

● 8″ passive subwoofer enclosure

● Peak power: 1200 watts

● RMS power: 400 watts

● Impedance: Dual 4 Ohms

Dimensions: 18.8" x 19.9" x 5.9" (477 x 505 x 150mm)

● Second order passive radiator housing

● Recommended amplifier: POWERBOX400.1M-V7

======================

Vibe Powerbox400.1M-V7

1 Channel Amplifier 800W

Class D small and powerful micro amplifier
Ultra-compact footprint for easy installation
Use with a Critical Link Rapid kit for the precise fit

Vibe's latest amplifier technology allows us to deliver high performance in a small footprint. Our mono and 4-channel Powerbox micro amps are small yet powerful, delivering up to 400W for bass and 4 x 65W for speakers. The small size allows for easy installation. The 4-channel has a +12v external output and a loop-through signal output, making it an ideal system building block. The 4 channel amplifier has the option to passenger with ISO T harness directly to the head unit, this provides audio signal and normal and ground meaning there is no need to connect a separate cable to the vehicle battery, plug-in and play. For the bass amplifier, an ISOAWK kit (sold separately) is available from to make it compatible with an ISO T harness to connect to the existing stereo wiring harness in the vehicle, just like the 4 channel.

170w @ 4 ohms
800w peak
1.5" x 6.2" x 3.2" (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohms
400w RMS @ 1 ohm
Frequency range: 10Hz – 500Hz
Crossover Type: LP/Subsonic
Crossover Range: 30Hz – 150Hz Class D Microamp

Retail: € 399,00

Vibe POWER-AIR-T12

SUBWOOFER + AMP

Vibe BLACKAIRT12S-V0

Slim 12" Passive Radiator Subwoofer Enclosure

●Unique design passive radiator technology

● Ultra-slim profile allows easy mounting in tight spaces

● Single 4 Ohm Voice Coil Configuration




Specification

● 12″ Slim Passive Subwoofer Enclosure

● 900w peak, 300w RMS

● Impedance: 4 ohms

● 14.2″ x 21.1″ x 5.2″ (361 x 535 x 131mm)

===================

Vibe Powerbox400.1M-V7

Share on:
1 Channel Amplifier 800W

Class D small and mighty micro amplifier
Ultra-compact footprint for easy installation
Use with a Critical Link Rapid kit for the fastest fit

Vibe's latest amplifier technology allows us to deliver high performance in an incredibly small footprint. Our mono and 4-channel Powerbox micro amps are small yet powerful, delivering up to 400W for bass and 4 x 65W for speakers. The small size allows for easy installation. The 4-channel has a +12v external output and a loop-through signal output, making it an ideal system building block. The 4 channel amplifier has the option to fit with ISO T harness directly to the head unit, this provides audio signal and power and ground meaning there is no need to connect a separate cable to the vehicle battery, just plug and play. An ISOAWK kit (sold separately) is available for the bass amp and can be purchased with the amp to make it compatible with an ISO T harness to connect to the existing stereo wiring harness in the vehicle, just like the 4 channel.

170w @ 4 ohms
800w peak
1.5" x 6.2" x 3.2" (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohms
400w RMS @ 1 ohm
Frequency range: 10Hz – 500Hz
Crossover Type: LP/Subsonic
Crossover Range: 30Hz – 150Hz Class D Microamp

Retail: € 379,00

Vibe RAPAWK5M

Critical Link 5m Rapid Fit Amp Wiring Kit
● Fastest Fitting Amp kit on the Market
● 500 watts capable
● RAPID FIT
Specifications
● Model: RAPAWK5M
● Power cable length: 5 Metres
● Ground cable length: 1.5 Metres
● Input cable length: 5 Metres
● Power / Ground cable diameter: 16awg
● Supplied fuse rating: 20A
● Maximum fuse rating: 30A.

Retail: € 34,99

Vibe CLDR-V7

Anti Vibe Sound Attenuating Roller

● Sound Attenuating Applicator
● For the perfect application of Butyl Sound Attenuating
● Rubber Roller with wooden handle

Retail: € 12,99

Vibe BLACKAIRT12S-V0

Slimline 12 inch Passive Radiator Subwoofer Enclosure


● Unique Design Passive Radiator technology
● Ultra slim profile allows easy fitment in tight spaces
● Single 4 Ohm Voice Coil Configuration
Specification
● 12″ Slim Passive Subwoofer Enclosure
● 900w Peak, 300w RMS
● Impedance: 4 ohm
● 14.2″ x 21.1″ x 5.2″ (361 x 535 x 131mm)

Retail: € 219,00

Vibe BLACKAIRP8-V6

BlackAir Wheel Well Triple 8 Inch Passive Radiator Subwoofer Enclosure


● Unique design passive radiator technology.

● Unique mounting system allows mounting in most wheel arches to create spectacular space

● Dual 4 Ohm voice coil configuration.

Steel mesh grilles protect the passive radiator from possible damage.

● Spring loaded clamps allow heavy cable connection.



Specifications

● Model: BLACKAIRP8-V6

● 8″ passive subwoofer enclosure

● Peak power: 1200 watts

● RMS power: 400 watts

● Impedance: dual 4 ohms

Dimensions: 18.8" x 19.9" x 5.9" (477 x 505 x 150 mm)

● Second order passive radiator housing

● Recommended amplifier : POWERBOX400.1M-V7

Retail: € 249,00

Vibe Opti-Slick Pack

Vibe OptisoundAuto8A-V2

Subwoofer under the seat 900W

Slimline and Underseat Applications
Amplifier and wiring kit included
Ported Enclosure Technology

These super-slim bass enclosures are designed to fit into even the smallest of spaces, while still providing the big bass response people have come to expect from VIBE.

Small, sleek and lightweight, these enclosures fit in any available space, behind a seat, under the seat or tucked away in your boot. The OptiSound enclosures are perfect for those looking to add bass to their system but want a stealth setup or don't have the space for a large enclosure.

Housing type. Configuration: Ventilated
Height 3” (75mm). Width 10.6" (270mm). Depth 15" (380mm)
Weight 4.66 kg
Driver LiteAir 8
Impedance 4Ω
RMS power 300 watts
Peak power 900 watts
TurboPort Labyrinth Slot Port
Features tight bass.

-----

Vibe Slick6SQC-V7

6.5″ SET Compo 270W

VIBE's mission with its Slick range of loudspeakers was to produce a truly efficient loudspeaker that delivered class-leading performance. The VIBE R&D team has developed the Slick SQ loudspeaker from scratch using their skills and expertise in loudspeaker design to produce the most efficient VIBE loudspeaker to date. The woofer design uses a super-lightweight paper composite cone and foam surround, a single-layer spider and a perfectly balanced 2-inch voice coil. The slick woofer can therefore deliver effortless bass and unparalleled vocal response at any input power.

The SQ version of the Slick Series loudspeaker features a fully passive crossover network with tweeter attenuation and higher quality components to enhance the already great sound. The technology incorporated into the component tweeter is that of a product that is many times more expensive. Its small size of 25mm makes it one of the smallest on the market, coupled with British design, engineering and built with European components.

Aesthetically beautiful, precise in performance, with class-leading efficiency.

SPECIFICATIONS:
6.5″ 2-way component speaker
270w peak
90w RMS
Sensitivity: 94dB
Frequency range: 54Hz – 25 kHz
Impedance 4 ohms
Mounting Depth: 2.4" (61mm)
Mounting Diameter: 5.6″ (142mm)
Ultra-compact 25mm silk dome tweeter delivers an exceptional level of sound quality combined with high efficiency.
New heavier cone for more accurate bass and vocal response and a better shape around the raised speaker BL . to handle
Larger engine than the standardized Slick6 that delivers much greater engine power, allowing a 25% increase in power.
94db sensitivity rating, giving industry-leading speaker efficiency.
Full active crossover with premium components
Modified VC for harmonized performance alongside new motor and cone
Stylish design for seamless system integration.

Retail: € 399,98

Blaupunkt Skagen 400 DAB

Radio
High Quality RDS Auto Tuner
FM (RDS), AM (MW / LW) World-Tuner
RDS with AF, CT, EON, PS, PTY, REG, TA & TP
Integrated DAB / DAB + with service link
Travelstore

Show
9-digit DOT display
Black / white negative display
Adjustable brightness
Clock display

Bluetooth
Built-in Blutooth 2.0 with EDR
Hands-free calling, phonebook upload and audio streaming
Profile: HFP, PBAP, A2DP, AVRCP
Built-in microphone
External microphone jack
Main phone functions: accept / hang up / reject call / redail

Media player
Play audio from USB / SDHC
Audio playback broadcasts: MP3, WMA
Blaupunkt comforter with 2 encoders with ID tag2, file and folder< br />Fast read media from USB, SDHC and SD

Data carrier
USB 2.0
SDHC (up to 32 GB), SD, MMC< br />
Inputs / outputs
Front USB (Standard A type)
SDHC / SD reader
Front aux-in
Steering Wheel Control Input (SWC, Programmable)
Phone Mute

Equalizer / Amplifier
X-Bass Function< br />3 sound settings (rock, pop, classic)
4-channel preamp (4V)
Subwoofer out
4x 24W RMS / 4 x 50W Max. power

General
Software update via USB
Release panel with panel housing
Permanent drive memory
 

Retail: € 179,00

Blaupunkt Stockholm 400 DAB

Tuner Type: High-End Automotive Tuner Blaupunkt CODEM
World Tuner (switchable): EU, US, South America, Thailand
Frequency bands: FM, AM, DAB, DAB+
Frequency band FM: 87.5 – 108 MHz
Frequency band MW: 531-1602/ 530-1710 kHz
Channels (frequency band) DAB/ DAB+: 5A- 13F (174.928- 239.200 MHz) Station memory
: FM1, FM2, FMT (15x UKW), AM1 (5x AM), DAB1-3 (15x DAB)
Switchable station memory: FM2, FMT, AM, DAB2, DAB3 Station display
(PS): Yes
Radio Text/ Radio Text Plus (RT/ RT+): Yes/ No
Display DLS/ ENSEMBLE/ SERVICE: Yes/ Yes/ Yes
Alternative Frequency Function (AF): Yes
Traffic Radio (TA) FM/ DAB: Yes/ Yes
RDS Time (CT): Yes
Improved Oth. net. (EON): Yes
Regional Function (REG): Yes
Program Type Identification (PTY) FM/ DAB: Yes/ Yes
Scrolling: Yes (once/repeatedly)
Travelstore/ Memory Travelstore: Yes (5x FMT)
Band Scan + Preset Scan FM / DAB: Yes / Yes
Sensitivity (FM): Two levels (lo / dx)
Noise Reduction (FM): Yes
Hi-Cut (FM): Yes (Multi-level switchable)
DAB-DAB service following: Yes
DAB-FM service next: Yes
Service scan: Yes
Ensemble/ Service change: Yes/ yes
Service Browsing: Yes
Frequency range FM: 30 – 15,000 Hz +/- 3 dB
Frequency range DAB: 20 ​​– 20,000 Hz +/- 3 dB
media player

Rear AUX: Yes (3.5mm jack)
AUX Detection/Source Activation: No/ Manual
USB front: yes (type A, recessed jack)
USB back: No
Memory card reader: No
Hidden Front Inputs: Yes (USB)
Compatible Format (USB): FAT16, FAT32, exFAT
Maximum storage size (USB, memory cards): > 128 GB
Maximum number of files/folders (USB, memory cards): > 20000
CD loader (for CDDA, CD-R, CD-RW) : Yes
Playback formats: MP2, MP3, WMA, FLAC, M4A/AAC, WAV
Playback options (may depend on media file): ID3V2 (title, artist, album), folder,
file, playback time Browse
through folders and files: Yes
Scrolling : Yes (once / repeated)
iPod, iPhone control: Yes (via USB)
Shuffle folder/ media: Yes/ Yes
Repeat Title/ Folder/ All: Yes/ Yes/ Yes
Intro scan: Yes
Bluetooth

Phone call: Yes
Internal microphone: Yes
Connectivity ext. microphone: yes
Answer/Reject call: Yes/Yes
Phonebook access: Yes (max. 1000 numbers)
Audio streaming: Yes
Audio streaming ID3 track display: Yes (title, artist, album, play time)
Scrolling: Yes (once/repeatedly)
Access via voice assistant
(such as Siri, Google, Alexa): Yes
Audio mix for mobile phone navigation: No
Automatic wake up on call: Yes (when radio off + ignition on)
Quick pairing without PIN code: Yes
Auto Reconnect: Yes
Bluetooth version: 5.0
Number of paired devices: max. last 5
Number of devices connected simultaneously: Max. 1
Supported profiles: A2DP, AVRCP, HFP, SPP
Audio codecs: AAC, SBC
*Feature availability/support depends on the phone/app used!

SOUND


Equalizer: Presets (Rock, Pop, Classic)
Bass/Treble Adjustment: Yes / Yes (+/- 7 steps)
Balance/fader: Yes / yes (+/- 9 steps)
HPF/LPF: No
Loudness: Yes
Sound Presets : Rock, Pop, Classic
Source specific sound customization: Yes
Speaker Outputs (Channels): 4
preamp outputs (channels, voltage): 4 (RCA, < 2 V)
Sub output (channels, voltage): 2 (RCA, < 2 V, gain/frequency variable)
Max. Power: 4 x 50 watts
Sine power at 14.4 V: 4 x 24 watts (according to DIN 45324)
GENERAL

Display: LCD, negative, anti-glare, wide angle, alphanumeric + symbols
Illumination Color Display/ Keys: Multicolor, 7 Colors (White, Green, Yellow, Red, Violet, Blue, Sky Blue)
Day/night mode: Yes (manual/via dimmer connection)
Brightness: Multi-level, variable (16 steps)
Time Display: Yes
HMI languages: English, GermanLow standby current: Yes (< 3.5 mA )
Antenna inputs: FM DIN/ ISO (with adapter) , DAB SMB (DAB with 12 V phantom power)
Mute input/Phone mute: Yes (GND active)
ext. hands-free microphone jack: Yes
Remote Control: Yes (IR input for RC-10 and
card remote control) Steering remote control (SWC): Yes (analog, programmable, pre-programmed)
Variable scan time: Yes (4, 8, 12, 16, 60s)
Confirmation beep: Yes (can be switched off)
Control panel type: Fixed panel
Color panel/ decor ring: Black/ Black
Software update: via USB
Permanent Memory: Yes ( Settings & Presets)
Demo Mode: Yes
Weight: approx. 1.45 kg
Dimensions: housing 52 x 178 x 170 mm, front 188 x 58 mm (H x W x D)
Operating voltage: 10.5 – 14.4 V
Current consumption: Operating: < 10A, 10 sec. after ACC shutdown: < 3.5 mA

Retail: € 219,00

Blaupunkt Barcelona 200 DAB BT

Main features
RDS tuner
FM (RDS), AM
DAB+ Tuner
Convenient choice of files
Playback formats: MP3, WMA
Fast reading from USB
Selectable display modes (file, folder, title, artist, album & time
Data carriers: USB
9-digit display
Integrated Bluetooth (HFP, A2DP)
Integrated microphone
Front USB
Front aux-in
4 x 40 watts max.
2-channel preamplifier
Sound presets (flat, rock, pop, classical)
X-bass
Red key illumination


Technical data

ANALOG RADIO
Tuner type: RDS tuner
Frequency bands: 3 x AM/FM
Radio Data System (RDS): Alternative Frequency (AF), Clock Time (CT), Program Service Name (PS), Regional Program (REG), Traffic Announcement (TA), Traffic Program (TP)
Travelstore: yes (FMT)
Band scan/preset scan: no/no
Station memory: 15 FM/15 AM
Sensitivity: lo / dx
Interference suppression: yes
Frequency response (hz) -3 dB: 20 ​​- 18,000

BLUETOOTH
Supported profiles: HFP, A2DP
Audio streaming: yes
Pairing (number of devices): 1
Hands-free calling: yes
Microphone: integrated
Core functions: accepting, ending, rejecting calls, redialing
Access to mobile phone directory: yes (up to 100 contacts per mobile phone)

DATA CARRIER
USB: 1 x front

MEDIA PLAYER
Playback formats: MP3, WMA
Title display: ID tag, folder/file
Folder & file selection: no
Display modes: yes (file, folder, title, artist, album, playing time)
Mix random play/repeat/scan: yes/yes/yes
Bit rate (kBit/s): 32 - 320

AUDIO/EQUALIZER
Bass/Treble: yes/yes (+/- 7 steps)
Balance/fader: yes/yes (+/- 9 steps)
X-Bass: yes
Sound presets: flat, rock, pop, classical

AMPLIFIER
Number of channels: 4
Max. Power: 4 x 40 watts
Sinus power at 14.4 V: 4 x 20 watts

DISPLAY
Type/digits: 1-line/9
Color: negative, black and white
Clock display: 24/12 hours

INPUTS
Antenna (number/type): 1 (FM ISO)
USB (number/type): 1 (front)
Aux-In (number/type): 1 front (3.5 mm jack)

OUTPUTS
Speakers (number): 4
Preamplifier (channels): 2-channels (RCA)
Preamplifier (voltage): 1.5 V (rms)

GENERAL
Software update: via USB
Confirmation beep: yes
Menu language: English
Control unit type: Fix Panel
Key illumination: red
Permanent storage after power loss: yes
Ignition logic: yes
Weight (kg): approx. 1
Dimensions (mm): 188 x 58 x 165
DAB window antenna: optional
Operating instructions: yes
Packaging: yes

Retail: € 169,00

Blaupunkt Palma 200 DAB BT

Main features
RDS tuner
DAB+ tuner
FM (RDS), AM
Playback formats: MP3, WMA
Fast reading from USB
Selectable display modes (File, Folder, Title, Artist, Album and Time)
Storage medium: USB, SD
9-digit display
Integrated Bluetooth (HFP, A2DP)
Integrated microphone
Front USB
Front Aux-in
4 × 40 watts max.
2-channel preamp
Sound Presets (Flat, Rock, Pop, Classic)
X bass

Technical specifications

Analogue radio
Tuner type: RDS tuner
Frequency bands: 3 × FM / 2 × AM
Radio Data System (RDS): Alternative Frequency (AF), Clock Time (CT), Program Service Name (PS), Regional Program (REG), Traffic Announcement (TA), Traffic Program (TP)
Travelstore: yes (FMT)
Band Scan / Preset Scan: yes / no
Station memory: 15 FM / 15 AM
Sensitivity: lo / dx
Noise suppression: yes
Frequency Response (Hz) -3dB: 20 ​​– 18,000

DAB features
DAB / DAB+: yes/ yes
Service update: no
Service Scan: yes
Station memory: yes
Ensemble / program browsing: no / yes
Program scan: no
Services link DAB-DAB: no
Services link DAB-FM: no
Services link DAB-DAB-FM: no
Radio text: no
PTY programs: no
Frequency Response (Hz) +/- 3dB: 20-18,000 Hz

Bluetooth
Supported profiles: HFP,A2DP
Audio streaming: yes
Pairing (number of devices): 1
Telephone hands-free: yes
Microphone: integrated
Core functions: Accept, end, reject, redial a call
Access cell phone phone book: yes (up to 100 contacts per cell phone)
USB: 1 × front
SD slot: 1 × front

Media player
Playback formats: MP3, WMA
Title display: ID tag, folder/file
Folder and file selection: no
Display modes: yes (file, folder, title, artist, album, playing time)
Mix (random play) / Repeat / Scan: yes / yes / yes
Bit rate (kbps): 32 – 320

Audio / Equalizer
Bass / Treble: yes / yes (+/- 7 steps)
Balance / Fader: yes / yes (+/- 9 steps)
X-Bass: yes
Sound Presets: Flat, Rock, Pop, Classic

Amplifier
Number of channels: 4
Max. power: 4 × 40 watts
Sine output at 14.4 V: 4 × 20 watts

Screen
Type / Digits: 1-line / 9
Color: negative, black and white
Clock display: 24 / 12 hours

Inputs
Antenna (number): 2 (FM ISO / DAB SMB 12V Phantom)
USB (number / type): 1 (front)
Aux-In (number / type): 1 front (3.5 mm jack)

Outputs
Loudspeakers (number): 4
Preamp (channels): 2-channels (RCA)
Preamp (Voltage): 1.5 V (rms)

General
Software update: via USB
Confirmation beep: yes
Menu language: English
Control panel type: Fix Panel
Permanent storage after power loss: yes
DAB Glass Antenna: Optional
ISO connector cable set: yes, 16 pin connector
User manual: yes

Retail: € 149,00

Blaupunkt Frankfurt RCM 82 DAB

Retro Car Radio with Bluetooth
Listen to your favorite radio shows and playlists on the way to work with this bluetooth car radio. You listen to your favorite shows via the digital radio (DAB+). If you like listening to your own playlists, that's also possible. Connect your smartphone via Bluetooth and turn on the desired podcast or playlist. Thanks to the external microphone, you can make hands-free calls. The bluetooth car radio has a cool retro look, giving your car a unique and original look.

● Blaupunkt FRANKFURT RCM 82 DAB, 1DIN Retrolook car radio, specially developed for Youngtimers and Oldtimer vehicles
● Specially developed for old-timers and young-timers, modern technology in a retro-look housing
● 9 Digit Wide Angle LCD Display + Intuitive Status Icons with Vario Color, 4096 Color Selectable
● High Quality Blaupunkt CODEM IV World Automotive AM / FM and DAB+ Tuner
● Frequency band FM, AM, DAB, DAB+
● Frequency band FM: 87.5 - 108 MHz
● Frequency band MW: 531 - 1602/ 530 - 1710 kHz
● Channels: DAB/ DAB+ 5A -13F (174.928 -239.200 MHz)
● Store station: 15 x FM, 10 x AM, 15 x DAB
● Station Storage: FM2, FMT, AM, AMT, DAB2, DAB3
● Input: 2 x USB (max 128 GB) + SDHC / SD + AUX input (3.5MM)
● Integrated Bluetooth module 5.0 LE, including internal and external microphone
● Twin Connect, 2 phones connected at the same time via Bluetooth
● Bluetooth compatible with: A2DP, AVRCP, HFP, SPP, aptX, AAC, SBC
● Voice control support: Siri, Google, Alexa
● 10 Bands Parametric Equalizer
● 3 x RCA Pre-outs: Front, Rear and Subwoofer, 4 Volt
● 3 Sound Settings (Rock, Pop, Classic)
● Compatible with USB playback: MP2, MP3, WMA, FLAC, M4A (AAC), APE, WAV + Playback options ID3V2 (title, artist, album), folder, file, playing time
● Power: 4 x 50 watts MAX (MOSFET)
● 2 x USB ports, 1 x front and 1 x rear with 1.5 A charging capability
● 1 x SDHC slot on the front (up to 128 GB)
● 1 x AUX connection on the front
● Multicolor version, choice between green and orange
● Steering wheel interface connection for external interface
● Built-in Low Pass | High Pass Filters
● Permanent memory interface, even when the power is turned off, all settings are kept
● You are buying from an authorized and official Blaunpunkt dealer

Retail: € 549,00

Vibe BDPRO3T-V7

3" tweeter 300W

BlackDeath 3 Inch Bullet Tweeter is fitted with a high efficiency compression driver with a cast aluminium flange and signature CNC detailing. Neodymium motor delivers extreme power and high SPL, Titanium diaphragm, 106 db sensitivity rating, giving class leading speaker efficiency, Inline passive crossover filter.

Model: BDPRO3T-V7
Type: Compression Driver
Configuration: 1-way
Speaker Size: 3” (75mm)
RMS Power: 100 watts
Peak Power: 300 watts
Minimum Input (RMS): 50 watts
Sensitivity: 106dB
Frequency Response: 2kHz – 25kHz
Impedance: 4Ω
Mounting Depth: 1.7” (43mm)
Mounting Diameter: 2.2” (57mm)

Retail: € 59,99

Vibe PULSE10-V0

10"subwoofer 1050W

Low budget doesn’t have to mean low performance! The PULSE10 is part of a series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled dustcap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

• 350 Watts RMS

• 1050 Watts Peak

• 2100 Watts SPL (BURP)

•Single 4Ω

• Pressed paper Cone

• PP Dome Dustcap

• 1.5″ OFC Voice Coil

• Poly Cotton Spider

• Bumped Backplate

• Butyl Foam Surround

Retail: € 89,00

Vibe PULSE12-V0

12" subwoofer 350W

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

• 350 Watts RMS

• 1050 Watts Peak

• 2100 Watts SPL (BURP)

•Single 4Ω

• Pressed paper Cone

• PP Dome Dustcap

• 1.5″ OFC Voice Coil

• Poly Cotton Spider

• Bumped Backplate

• Butyl Foam Surround

Retail: € 99,00

Vibe OPTIOSOUNDMERC8wr-V2

8" Subwoofer set 300W

An OEM (Original Equipment Manufacturer) upgrade is designed specifically for Mercedes Benz to replace the factory speaker without any compromise on the integrity of the vehicle or warranty.

All our OEM speaker upgrades come with all the relevant brackets and wiring connections for direct Plug & Play with the OEM connectivity.

By using high efficiency drivers and Neodymium magnets we are able to keep the speakers lightweight and easy to install.

• Composite cone using paper and wood fibres for a lightweight and rigid cone, producing a natural vocal reproduction.

• All drivers feature powerful Neodymium motors which deliver maximum magnetic force with shallow installation depth.

• Custom tooled 8 inch subwoofer directly replaces the under dash installed factory speakers and delivers improved bass performance.

Model – OPTISOUNDMERC8WR-V2

Type -Component

Configuration – 1-way

Speaker Size – 8” (00mm)

Peak/RMS – 300W/150W

Sensitivity – 88dB

Frequency Response – 35Hz – 250Hz

Impedance – 3.6Ω

Vehicle Manufacturer – Mercedes Benz

Fitment C-Class (A205/C205/W205/S205) E-Class (A238/C238/W213/S213) GLC (X253/C253)

Grille Included – Yes

Recommended Amp – POWERBOX400.1M-V7

Retail: € 389,99

Vibe OPTISOUNDMERC4-V2

4" 2way 180W Coaxial Speaker

An OEM (Original Equipment Manufacturer) upgrade is designed specifically for Mercedes Benz to replace the factory speaker without any compromise on the integrity of the vehicle or warranty.

All our OEM speaker upgrades come with all the relevant brackets and wiring connections for direct Plug & Play with the OEM connectivity.

By using high efficiency drivers and Neodymium magnets we are able to keep the speakers lightweight and easy to install.

• Composite cone using paper and wood fibres for a lightweight and rigid cone, producing a natural vocal reproduction.

• All drivers feature powerful Neodymium motors which deliver maximum magnetic force with shallow installation depth.

Model – OPTISOUNDMERC4C-V2 O

Type -CoAXIAL

Configuration – 2-way

Speaker Size – 4” (100mm)

Peak/RMS – 180W/60W

Sensitivity – 89dB

Frequency Response – 90Hz – 25kHz

Impedance – 4Ω

Vehicle Manufacturer – Mercedes Benz

Fitment C-Class (A205/C205/W205/S205) E-Class (A238/C238/W213/S213) GLC (X253/C253) S-Class (W222)

Grille Included – No

Recommended Amp – POWERBOX65.4M-V7

Retail: € 189,99

Vibe PULSE6-V0

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

6.5”(165mm) 2-way Coaxial speaker 180 Watt
Peak Power output – 60 Watts RMS
Frequency Response: 65HZ – 20KHZ
Sensitivity 91dB
Mounting Diameter 5.6” (141MM)
Mounting Depth 2.1” (53MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Steel Mesh Grill – Steel mesh grill provides protection for the woofer cone.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 46,99

Vibe PULSE5-V0

2way Speakerset 150W

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

5.25”(133mm) 2-way high efficiency coaxial speaker 150 Watt
Peak Power output – 50 Watts
RMS Frequency Response: 80HZ – 20KHZ
Sensitivity 90dB
Mounting Diameter 4.6” (117MM)
Mounting Depth 2” (50MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 44,99

Vibe PULSE4-V0

4" Luidsprekerset 120 Watt

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 35,99

Vibe CBR 12 BASS PACK

Monoblock Amplifier & Bass Enclosure

Monoblock Amplifier
“The world’s most powerful active amplifier with five
times more power than traditional active amplifiers.”

• The 400.1M is exactly the same width as a US $1 bill.
• Ultra compact size allows the amplifier to be hidden easily in
an OEM install.
• Optional ISO connection allows a direct inline connection to
factory source units.
• Perfect for OEM integration and aftermarket applications with
high level input and auto sense.
• Low pass crossover filter and bass boost.

Model POWERBOX400.1M-V7
Configuration Monoblock
Dimensions (H x W x D) 1.5” x 6.2” x 3.2”
(37mm x 157mm x 82mm)
RMS @ 4Ω Mono 170 watts
RMS @ 2Ω Mono 250 watts
RMS @ 1Ω Mono 400 watts
Maximum Power 800 watts
Frequency Response 10Hz - 500Hz
Crossover Type LP / Subsonic
Crossover Range 30Hz - 150Hz
Topology Micro Class D

=========================

Bass Enclosure
“The PULSE CBR12 is quire simply the best bang for
the buck on the market”

• 4th Order bass reflex enclosure.
• Ported enclosure delivers higher SPL and boosted bass
response.
• Flared turbo port reduces distprtion and smooths airflow.
• Compatible with rapid fit kit for fast and easy installation
without needing to directly connect to the vehicles battery

Model PULSECBR12-V7
Driver PULSE 12
Type Passive bass enclosure
Peak/RMS Power 900W/300W
Impedance 2Ω
Dimensions (H x W x D)
13.9” x 21.6” x 16.7”
(354mm x 550mm x 425mm)
Configuration 4th order bass reflex
Enclosure Type Trapezius Bass Enclosure
Recommended Amplifier POWERBOX400.1M

Retail: € 399,00

Vibe POWERBOX5000.1P-V0

Amplifier - Monoblock - 10400W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high


Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 10.4” x 9.2” (66 x 265 x 233mm)

RMS @ 4Ω 1900 watts

RMS @ 2Ω 3300watts

RMS @ 1Ω 5200 watts

Maximum Power 10400 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 559,99

Vibe POWERBOX3000.1P-V2

AMPLIFIER - MONO - 6600W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high


Model POWERBOX3000.1P-V0

Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 7.3” x 9.2” (66 x 185 x 233mm)

RMS @ 4Ω 1100 watts

RMS @ 2Ω 2050watts

RMS @ 1Ω 3300 watts

Maximum Power 6600 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 379,99

Vibe POWERBOX1500.1P-V0

AMPLIFIER - 3000W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high




Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 7.3” x 9.2” (66 x 185 x 233mm)

RMS @ 4Ω 400 watts

RMS @ 2Ω 650 watts

RMS @ 1Ω 1500 watts

Maximum Power 3000 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 279,99

Vibe BLACKAIR15D2-V7

15 INCH - 300W - WOOFER

For those who want sound quality to be loud. The new Blackair subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. 10, 12 and 15″ variants offer a solution for everyone with power ranging from 600w to 1000w RMS. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, these subwoofers offer beautiful bass but with the aggression of the larger competition subwoofers.

3000w Peak
1000w RMS
Sensitivity: 89 dB
Impedance dual 2 ohm
Frequency response: 20Hz – 850Hz
3″ 4 layer voice coil
Mounting depth: 8.7″” (220mm), mounting diameter: 13.8″ (350mm)
Enclosure volume: 2 – 4 cubic feet

Retail: € 299,00

Vibe BLACKAIR10D2-V7

10 INCH WOOFER - 1800W

The Black Air 10 inch Dual 2Ω Subwoofer is for those who want sound quality to be loud. The new Black Air subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, the Black Air 10 inch Dual 2Ω Subwoofer offers beautiful bass but with the aggression of the larger competition subwoofers.

Available in: 10, 12 and 15″ variants that offer a solution for everyone with power ranging from 600w to 1000w RMS.

1800w Peak, 600w RMS
Sensitivity: 85 dB
Impedance dual 2 ohm
Frequency response: 30Hz – 1 kHz
2.5″ 4 layer voice coil
Mounting depth: 6.3″ (160mm), mounting diameter: 9.3″ (235mm)
Enclosure volume: 1 – 2 cubic feet

Retail: € 229,00

Vibe PULSECBR12A-V0 Active

Active 12" Subwoofer 900W

12″ High Output Bass Enclosure Enclosure
Actively Powered with 400 watts
VIBE Turbo port

The new Vibe Pulse CBR Active is the best bang for buck enclosure we have every built.

With a massive 4 inch Turbo port and power wedge enclosure paired with a powerful Dual voice coil subwoofer the enclosure design offers serious bass.

The 2020 CBR offers a market leading amplifier solution in our revolutionary terminal amplifier, taking all the technology from our best ever selling amp the POWERBOX400.1 and adapting it into our Terminal amp becoming the most powerful active amplifier solution in the world!.

Keeping all the functions and even easier to install! Low and High level input, gain level control and option for a bass remote!

All compatible with our Rapid Fit wiring kit.

900w Peak
300w RMS
Impedance 4 ohm
13.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
170w @ 4 ohm
800w Peak
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier

Retail: € 299,99

Vibe BLACKAIRPRO6M-V0

6,5" Speaker set 480W

Model: BLACKAIRPRO6M-V0
6.5″ Pro Speaker
Non pressed paper cone
Dual roll foam surround
Unique Rubber gasket
Polycotton spiders
Unique baloney cut Phase Plug
High Efficiency

The VIBE BlackAir range has always been about sound quality paired with volume commonly known as SQL and the new range of Pro audio drivers are no exception.

Aimed squarely at the SQL competition scene, these all-new Pro audio drivers deliver huge volume with all the quality you’ve come to expect from VIBE. This is a pairing of HIFI sound quality with Pro audio volume – The best of both worlds!

We’ve added a high efficiency 8″ and 6.5” midrange driver and married it to an oversized 4.5” Titanium bullet tweeter to deliver best in class performance.

• Non pressed paper cone
• Dual roll foam surround
• 38mm voice coil
• Polycotton spiders
• Spade terminal for easy connection
• Rubber gasket

Model – BLACKAIRPRO6M-V0
Type – Pro audio midrange
Configuration – 1-way
Speaker Size – 6.5” (165mm)
RMS Power – 160W
Peak – 480W
Sensitivity – 98dB
Frequency Response – 80Hz – 10.5kHz
Impedance – 4Ω
Mounting Depth – 2.7” (69mm)
Mounting Diameter – 5.6” (141mm)
Grille Included – No
Recommended Amp – POWERBOX150.4M-V0

Retail: € 79,99

Vibe CVEN63C-V4

6.5" Speaker set 3-way 290W

3 Way high end speaker
Separate Crossover
Designed and Engineered in the UK

High level sound quality 3 way component speaker set

The CVEN 6 has a wide and flat frequency response, enabling it to be common to both a two way and three way component kit. The midwoofer is designed to overcome the inherent problems of every loudspeaker design: distortion, power handling, dynamic response and efficiency.

Model CVEN63C-V4
Type Component
Configuration 3-way
Speaker Size 6.5” (165mm)
RMS Power 130 watts
Peak Power 290 watts
Minimum Input (RMS) 65 watts
Sensitivity 91dB
Frequency Response 45Hz – 20kHz
Impedance 4Ω
Mounting Depth 2.9” (73mm)
Mounting Diameter 5.6 ” (143mm)
Recommended Amp CVENC6-V4

Retail: € 699,00

Vibe CVEN62C-V4

EISA Award Winning Design
High-end SQ Speaker
Designed and Engineered in the UK

CVEN speakers were designed by the Vibe R&D team in the UK. Our aim was to create a speaker that delivers reproduction of recorded sound that is as realistic as possible.

CVEN speakers were designed by the Vibe R&D team in the UK. Our aim was to create a speaker that delivers the reproduction of recorded sound that is as realistic as possible.
The CVEN 6 has a wide and flat frequency response, enabling it to be common to both a two way and three-way component kit. The mid-woofer is designed to overcome the inherent problems of every loudspeaker design: distortion, power handling, dynamic response, and efficiency.

Each component of the system is matched and balanced to produce a linear frequency response which enables the listener to appreciate music as the artist originally intended.

Model: CVEN62C-V4
Type: Component
Configuration: 2-way
Speaker Size: 6.5” (165mm)
RMS Power: 120 watts
Peak Power: 240 watts
Minimum Input (RMS): 60 watts
Sensitivity: 91dB
Frequency Response: 45Hz – 20kHz
Impedance: 4Ω
Mounting Depth: 2.9” (73mm)
Mounting Diameter: 5.6 ” (143mm)
Recommended Amp: CVENS4-V4

Retail: € 549,99

Vibe OptisoundVWt6-V0

VW Speaker set 2-way 360W

VW T6 Specific Kit -Please 8″ kit is note not available for the T6.1
8 Inch speaker, Adaptor brackets, adaptor cables, sound deadening
All components included for easy and fast fitment

“With the new OPTISOUND speaker kits getting everything you need for your upgrade has never been easier! The OPTISOUND kits have been designed to leave no stone un-turned and giving everything required to fit your speakers easily and to optimise the sound performance!

Who? – The OPTISOUND speaker kits are designed for the consumer who rea

1 Pair OPTI8C speakers
1 Pair Anti VIBE sound deadening
1 Pairs VW Speaker Adapter brackets
1 Pairs VW Speaker Adapter Cables
1 Pair Tweeter fittings
Model – OPTIVWT6-V8
Configuration – 2-way
Speaker Size – 8” (200mm)
Peak/RMS Power – 360W/120W
Sensitivity – 90dB
Frequency Response – 50Hz – 20kHz
Impedance – 4Ω
Mounting Depth – 2.4” (61mm)
Mounting Diameter – 5.6” (142mm
Grill Included – No
Recommended Amp – POWERBOX65.4m-v7

VW T6 Plug and Play Speaker installation kit

All components required for simple and easy installation of speakers into your VW T6

Retail: € 219,99

Vibe Optisound8VWt5.1-V0

VW speaker kit 2-way 360W

VW T5.1 Specific Kit
8 Inch speaker, Adaptor brackets, adaptor cables, sound deadening
All components included for easy and fast fitment

“With the new OPTISOUND speaker kits getting everything you need for your upgrade has never been easier! The OPTISOUND kits have been designed to leave no stone un-turned and giving everything required to fit your speakers easily and to optimise the sound performance!

Who? – The OPTISOUND speaker kits are designed for the consumer who really wants better sound but doesn’t want to modify their car, German Saloons, British hatchbacks, Italian super minis are all covered!

Why? – Upgrading a speaker is often the first port of call for enhancing sound.
Why? For better sound of course! The super efficient OPTI6C speaker within the kit gives enhanced volume and incredible levels of detail making this the best listening experience you will get from such easy installation.

What? – The OPTISOUND speaker kits comes all the fitting parts specific to your vehicle, as well as sound enhancing components such as sound deadening, wave diffuser and adjustable speaker baffle. These sound enhancing parts set the OPTISOUND speaker kits apart in ensuring that not only is installation made easy but we optimse the sound that we can produce from out award winning speaker in every installation

1 Pair OPTI8C speakers
1 Pair Anti VIBE sound deadening
1 Pairs VW Speaker Adapter brackets
1 Pairs VW Speaker Adapter Cables
Model – OPTI8VWT5.1-v0
Configuration – 2-way
Speaker Size – 8” (200mm)
Peak/RMS Power – 360W/90W
Sensitivity – 94dB
Frequency Response – 54Hz – 25kHz
Impedance – 4Ω
VW T5.1 Plug and Play Speaker installation kit

All components required for simple and easy installation of speakers into your VW T5.1

ENSURE THE CHECKING OF BRACKET SIZE BEFORE PURCHASE AND INSTALLATION

Retail: € 219,99

Vibe OptisoundVWt6.1-V9

VW speaker kit 2-way 270W

VW T6.1 Specific Kit
6 Inch speaker, speaker baffle, Adaptor brackets, adaptor cables, sound deadening
All components included for easy and fast fitment

“With the new OPTISOUND speaker kits getting everything you need for your upgrade has never been easier! The OPTISOUND kits have been designed to leave no stone un-turned and giving everything required to fit your speakers easily and to optimise the sound performance!

Who? – The OPTISOUND speaker kits are designed for the consumer who really wants better sound but doesn’t want to modify their car, German Saloons, British hatchbacks, Italian super minis are all covered!

Why? – Upgrading a speaker is often the first port of call for enhancing sound.
Why? For better sound of course! The super efficient OPTI6C speaker within the kit gives enhanced volume and incredible levels of detail making this the best listening experience you will get from such easy installation.

What? – The OPTISOUND speaker kits comes all the fitting parts specific to your vehicle, as well as sound enhancing components such as sound deadening, wave diffuser and adjustable speaker baffle. These sound enhancing parts set the OPTISOUND speaker kits apart in ensuring that not only is installation made easy but we optimse the sound that we can produce from out award winning speaker in every installation

1 Pair OPTI6C speakers
1 Pair VIBE Wave diffuser
1 Pair Anti VIBE sound deadening
1 Pairs VW Speaker Adapter brackets
1 Pairs VW Speaker Adapter Cables
Model – OPTIVWT6.1-V9
Configuration – 2-way
Speaker Size – 6.5” (165mm)
Peak/RMS Power – 270W/90W
Sensitivity – 94dB
Frequency Response – 54Hz – 25kHz
Impedance – 4Ω
Mounting Depth – 2.4” (61mm)
Mounting Diameter – 5.6” (142mm
Grill Included – No
Recommended Amp – POWERBOX60.2-V7
VW T6.1 Plug and Play Speaker installation kit

All components required for simple and easy installation of speakers into your VW T6.1

Retail: € 219,99

Vibe OptisoundBMW8-V4

BMW Underseat Subwoofer 345W

Direct Replacement Underseat Subwoofers
Enhanced bass response over factory speakers
Add Powerbox65.4M for even greater sound

Easiest plug & play installation due to car-specific baskets and harnesses, High-end crossover with reference curve setup, System can be used as passive or semi-active system, Approved compatibility with 1 SeriesE 82/87/88/ 3 Series 90/91/92/93

OPTISOUNDBMW8-V4 Car Specific Component
1-way 8” (200mm)
115 watts RMS
345 watts Peak
55 watts minimum input
Sensitivity: 90dB
Frequency response: 55Hz – 2500Hz
Impedance: 4Ω
Recommended amplifier: POWERBOX60.4-V7

Retail: € 219,99

Vibe OptisoundBMW4-V4

BMW speaker 2-way 345W

Direct Replacement Front door speakers
BMW adaptors and cables included
OEM Upgrade

Easiest plug & play installation due to car-specific baskets and harnesses, High-end crossover with reference curve setup, System can be used as passive or semi-active system, Approved compatibility with 1 SeriesE 82/87/88/ 3 Series 90/91/92/93

OPTISOUNDBMW4-V4 Car Specific Component
2-way, 4” (100mm)
115 watts RMS
345 watts Peak
55 watts Minimum input
Sensitivity 90dB
Frequency response 55Hz – 25kHz
Impedance 4Ω
Recommended amplifier: POWERBOX65.4

Retail: € 179,99

Vibe OptisoundVWkt-V8

VW speaker 2-way 270W

Vehicle specific fitment
6.5 Inch speaker, speaker baffle, Adaptor brackets, adaptor cables, sound deadening
Fits Multiple VW Models

With the new OPTISOUND speaker kits getting everything you need for your upgrade has never been easier! The OPTISOUND kits have been designed to leave no stone un-turned and giving everything required to fit your speakers easily and to optimise the sound performance!

Who? – The OPTISOUND speaker kits are designed for the consumer who really wants better sound but doesn’t want to modify their car, German Saloons, British hatchbacks, Italian super minis are all covered!

Why? – Upgrading a speaker is often the first port of call for enhancing sound.
Why? For better sound of course! The super efficient OPTI6C speaker within the kit gives enhanced volume and incredible levels of detail making this the best listening experience you will get from such easy installation.

What? – The OPTISOUND speaker kits comes all the fitting parts specific to your vehicle, as well as sound enhancing components such as sound deadening, wave diffuser and adjustable speaker baffle. These sound enhancing parts set the OPTISOUND speaker kits apart in ensuring that not only is installation made easy but we optimse the sound that we can produce from out award winning speaker in every installation.

01 Pair OPTI6C speakers
1 Pair VIBE Wave diffuser
1 Pair Anti VIBE sound deadening
2 Pairs VW Speaker Adapter brackets
2 Pairs VW Speaker Adapter Cables
1 Pair Tweeter fittings
Model – OPTIVWKT-V8
Configuration – 2-way
Speaker Size – 6.5” (165mm)
Peak/RMS Power – 270W/90W
Sensitivity – 94dB
Frequency Response – 54Hz – 25kHz
Impedance – 4Ω
Mounting Depth – 2.4” (61mm)
Mounting Diameter – 5.6” (142mm
Grill Included – No
Recommended Amp – POWERBOX60.2-V7
VW Model Fitments

Amarok 2010: (Front)
Beetle: 1997 – 2010 (Front)
Caddy: 2003 > (Front)
Caravelle: 2003 – 2008 (Front)
EOS -2006 – 2016
Golf: 2003 – 2008 (Front)
Golf: 2008 > (Front or Rear)
Jetta: 2005 > (Front)
Lupo: 1998 – 2005 (Front)
Multivan: 2003 – 2008 (Front)
T5: 2003 – 2008 (Front)
Polo: 2001 > (Front or Rear)
Scirocco: 2008 > (Front)
Sharan: 2010 > (Front)
Tiguan: 2007 – 2015 (Front or Rear)
Touran: 2003 > (Front or Rear)
UP: 2011 > (Front)

Retail: € 179,99

Vibe CL10AWK-V7

500 Watt Amp wiring kit

RCA, Remote, Power. Earth and Fuse Holder included
CCA Power and Earth cable

Vibe 10 AWG amplifier Wiring Kit

The Vibe wiring kits match value and performance are available in 10AWG, 8 AWG and high power 4 AWG packs, these kits provide everything you need to get up and running with your new VIBE amplifier.

•5m 10AWG power cable
•1m 10AWG ground cable
•5m RCA interconnect
•5m remote turn on wire
•2 x 5m 16AWG speaker cable
•Inline fuse holder
•30 amp ATC fuse

Retail: € 27,99

Vibe Fast Plug

Fast connection and disconnect
8AWG Power and Earth connections
60A current rated

Quick release plug allows fast safe removal of your active sub boxes and or expensive amplifiers and powered audio equipment. Fast installation no special tools required. Universal – works with any amplifier or active sub box. 80 amp power rating Heavy duty gold plated terminals accept up to 8 gauge wire Black ABS construction for maxium durability Screw mountable Large bolts to secure oversized wire (Allen key included)

Quick release plug allows fast safe removal of your active sub boxes and or expensive amplifiers and powered audio equipment.
Fast installation no special tools required.
Universal – works with any amplifier or active sub box.
80 amp power rating
Heavy duty gold plated terminals accept up to 8 gauge wire
Black ABS construction for maxium durability
Screw mountable
Large bolts to secure oversized wire (Allen key included

Retail: € 14,99

Vibe AntiVibeSDA-V9

Sound Dampener

Combination of sound deadening and dampening
6 piece pack
Perfect for sound enhancement in all 4 doors

VIBE Presents the Antivibe combo pack, this pack is designed to give you the ultimate sound enhancement for your car. The pack contains 4 sheets of Antivibe sound deadening and 2 sheets of Antivibe absorber

Anti Vibe Sound deadening panels are designed specifically for reducing external noises within the car i.e road noise. Easy to install with self adhesive panels.

Anti Vibe sound absorbing foam is designed specifically for acoustic benefits, its “egg box” design diffuses unwanted sound waves away from the speaker. The clever design allows up to 40% more absorption than a flat material. The absorber is pressure sensitive, this allows the material to be pressed into gaps and then to expand into areas that would otherwise be left bare. The sound absorbing foam has a self adhesive backing allows easily installation.

Model: ANTIVIBESD-V6BP
Thickness: 1” (25mm)
Construction: Polyurethane
Size: 7.4” (500mm) x 23.6” (600mm)
Pack qty: 2 sheets
Self Adhesive backing allows the material to be easily installed
Designed to absorb unwanted high frequencies
Convoluted construction absorbs 30-40% more sound than a flat panel
Model: ANTIVIBESDBP-V6
Thickness: 2.5mm
Construction: Butyl
Size: 10.6” (270mm) x 14.6” (370mm)
Pack qty: 4 sheets
Formed top design increases rigidity and reduces resonance
0.1mm military grade aluminium top layer
Butyl construction will not breakdown with high temperature conditions like inferior bitumen based products

Retail: € 29,00

Vibe OptisoundAuto8A-V2

Underseat Subwoofer 900W

Slimline and Underseat applications
Amp and Wiring Kit included
Ported Enclosure Technology

These super slim bass enclosures are designed to fit in even the smallest of spaces whilst still having the big bass presence that people have come to expect from VIBE.

Small, sleek and lightweight, these enclosures will fit into any available space, behind a seat, under seat or tucked away in your luggage compartment. The OptiSound enclosures are perfect for those looking to add bass to their system but want a stealth install or don’t have the space to spare for a large enclosure.

Type enclosure. Configuration: vented
Height 3” (75mm). Width 10.6” (270mm). Depth 15” (380mm)
Weight 4.66 kg
Driver LiteAir 8
Impedance 4Ω
RMS Power 300 watts
Peak Power 900 watts
TurboPort labyrinth slot port
Characteristics tight bass.

Retail: € 269,99

Vibe PULSEC8-V0

Underseat Subwoofer 240W

• Ultra compact and slimline
• Cast aluminum housings
• 6×8 inch subwoofer

Unique 6” x 8” subwoofer enclosure allows fitment in the most challenging of spaces, even under a seat.
Cast aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
High level input with Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
Wired remote gives full control of the subwoofer volume from the front of the vehicle.

Height : 2.8″ (72mm)
Width : 11.4″ (290mm)
Depth : 8.3″ (210mm)
Driver : Pulse 68
Impedance : 4 Ohms
RMS Power : 80w
Peak Power : 240w
Configuration : 2nd order acoustic suspension
Enclosure Type : Active Slim Fit Bass Enclosure

Retail: € 189,99

Vibe Slickpro37T-V0

3,7” Tweeter 225W

• PRO audio bullet tweeter
• Titanium diaphragm
• Cast aluminium flange
• Spade terminal for easy connection
• 25mm voice coil

For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.

Model – SLICKPRO37T-V0
Type –  Pro audio tweeter
Configuration – 1-way
Speaker Size – 3.7” (98mm)
Peak/RMS Power – 225W / 75W
Sensitivity – 102dB
Frequency Response – 2kHz – 20kHz
Impedance – 4Ω
Mounting Depth – 1.5” (37mm)
Mounting Diameter – 2.8” (72mm)
Grill Included – No

Retail: € 34,99

Vibe Powerbox150.4M-V0

4 Channel Amplifier 1920W

Class D Topology
Deltabox™ Connectivity
OPTISOUND™ Advanced OEM integration
VIBE Sound Studio™ Active crossovers
Auto Sense Turn on

VIBE British Audio introduces the brand new the 2020 POWERBOX  amplifier range!

Building on the success of our ground breaking Powerbox Micro amplifiers, we are proud to announce the more powerful and evolved Powerbox Mini range of four channel amplifiers.

Taking everything that was already great about the Micro amplifiers, our engineers pushed the small footprint platform to the next level.

Amplifier Topology

The range of Powerbox Mini class D multi-channel amplifiers feature a MOSFET output stage usually reserved for large platform amplifiers, the class D topology is much more efficient that the traditional class AB used in this style amplifier, this means the amp can be smaller and stay much cooler during operation. This delivers not only higher power output but also fantastic sound quality and the ability to bridge channels to drive a subwoofer making these a perfect one amplifier solution. The high efficiency design means less current draw and less strain on the factory charging system.

Deltabox™ Connectivity

Our Powerbox Mini amplifiers have inputs options to ensure that any system can be utilised to connect to these amps. Our high quality RCA inputs offer 0.5v – 6v input voltage alongside a new Deltabox™ High level input circuit which gives Autosense remote turn on for use with factory systems. This eliminates the requirement to use a separate line level convertor and accepts an input voltage of up to 35v! This offers a perfect range of connectivity. Deltabox™ High level input circuit paired with the High quality High Level inputs allows the amp to use a DC offset Auto sense turn on feature so no remote turn on is required when using this installation method, the DC offset method offers a much more stable and reliable turn on methodology compared to the traditional signal sensing.

OPTISOUND™ Advanced OEM integration

 

VIBE R&D partnered with the best amplifier designers in the car audio world to ensure our amplifiers perfectly integrate with the most modern of vehicles. Our amps feature technology that stops the autodetection problems and OEM Error messages that are displayed if installing common amps into new modern vehicles. The technology stop the vehicle sensing changes in resistance therefore giving no installation issues, such as cutting out of speakers, disappearance of fader and more. Our Powerbox amps are perfect for OEM installation. The OPTISOUND Range has become the go to upgrade of choice for many dealers when forced to retain the factory head unit.

VIBE Sound Studio™ Active crossovers

 

Utilising High and Low pass filters with a natural 12dB slope allows the 4 channels of amplification to be run passive and active systems safely. The amp also feature an incredible 10hz – 30Khz bandwidth when being used in FULL RANGE mode allowing you to take full advantage of even the highest ranging tweeters! This delivers suitable amplification for high bit rate sound reproduction and makes the VIBE POWERBOX range a great choice for demanding Sound Quality systems. The VIBE Sound Studio™ active crossover networks are a simple and easy way to run speakers fully active without the need for complex crossovers.

4 x 150w @ 4 ohm
4 x 240w @2 ohm
2x 480w @4ohm
Maximum Power – 1920 watts
Dimensions (H x W x D) – 1.9” x 15.4” x 5.3” (47x 390 x 134mm)
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 40Hz – 4kHz
Crossover Range – 10Hz – 50kHz
Class D

Retail: € 279,99

Vibe Powerbox100.4M-V0

4 Channel Amplifier 120W

Class D Topology
Deltabox™ Connectivity
OPTISOUND™ Advanced OEM integration
VIBE Sound Studio™ Active crossovers
Auto Sense Turn on

VIBE British Audio introduces the 2020 POWERBOX  amplifier range!

Building on the success of our ground breaking Powerbox Micro amplifiers, we are proud to announce the more powerful and evolved Powerbox Mini range of four channel amplifiers. By taking everything that was already great about the Micro amplifiers, our engineers pushed the small footprint platform to the next level.

Amplifier Topology
The range of Powerbox Mini class D multi-channel amplifiers feature a MOSFET output stage usually reserved for large platform amplifiers. The class D topology is much more efficient that the traditional class AB used in this style amplifier because the amp can be smaller and stay much cooler during operation. This delivers not only higher power output but also fantastic sound quality and the ability to bridge channels to drive a subwoofer. Making these a perfect one amplifier solution. The high efficiency design means less current draw and less strain on the factory charging system.

Deltabox™ Connectivity
Our Powerbox Mini amplifiers have inputs options to ensure that any system can be utilised to connect to these amps. Our high quality RCA inputs offer 0.5v – 6v input voltage alongside a new Deltabox™ High level input circuit which gives Autosense remote turn on for use with factory systems. This eliminates the requirement to use a separate line level convertor and accepts an input voltage of up to 35v! This offers a perfect range of connectivity. Deltabox™ High level input circuit paired with the High quality High Level inputs, allows the amp to use a DC offset Auto sense turn on feature so no remote turn on is required when using this installation method. The DC offset method offers a much more stable and reliable turn on methodology compared to the traditional signal sensing.

OPTISOUND™ Advanced OEM integration
 

VIBE R&D partnered with the best amplifier designers in the car audio world to ensure our amplifiers perfectly integrate with the most modern of vehicles. Our amps feature technology that stops the auto-detection problems and OEM Error messages that are displayed if installing common amps into new modern vehicles. The technology stop the vehicle sensing changes in resistance therefore giving no installation issues, such as cutting out of speakers, disappearance of fader and more. Our Powerbox amps are perfect for OEM installation. The OPTISOUND Range has become the go to upgrade of choice for many dealers when forced to retain the factory head unit.

VIBE Sound Studio™ Active crossovers
 

Utilising High and Low pass filters with a natural 12dB slope allows the 4 channels of amplification to be run passive and active systems safely. The amp also features an incredible 10Hz – 30kHz bandwidth when being used in FULL RANGE mode allowing you to take full advantage of even the highest ranging tweeters! This delivers suitable amplification for high bit rate sound reproduction and makes the VIBE POWERBOX range a great choice for demanding Sound Quality systems. The VIBE Sound Studio™ active crossover networks are a simple and easy way to run speakers fully active without the need for complex crossovers.

4 x 100w @ 4 ohm
4 x 120w @2 ohm
2x 240w @4ohm
Maximum Power – 960 watts
Dimensions (H x W x D) – 1.9” x 9.1” x 5.3” (47x 230 x 134mm)
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 40Hz – 4kHz
Crossover Range – 10Hz – 50kHz
Class D

Retail: € 229,99

Vibe Powerbox80.4MV0

4 Channel Amplifier 960W

Class D Topology
Deltabox™ Connectivity
OPTISOUND™ Advanced OEM integration
VIBE Sound Studio™ Active crossovers
Auto Sense Turn on

VIBE British Audio introduces the brand new the 2020 POWERBOX  amplifier range!

Building on the success of our ground breaking Powerbox Micro amplifiers, We are proud to announce the more powerful and evolved Powerbox Mini range of four channel amplifiers.

Taking everything that was already great about the Micro amplifiers, our engineers pushed the small footprint platform to the next level.

Amplifier Topology
The range of Powerbox Mini class D multi-channel amplifiers feature a MOSFET output stage usually reserved for large platform amplifiers. Class D topology is much more efficient than the traditional class AB used in this style amplifier. This means the amp can be smaller and stay much cooler during operation. This delivers not only higher power output but also fantastic sound quality. With the added ability to bridge channels to drive a subwoofer making these a perfect one amplifier solution. The high efficiency design means less current draw and less strain on the factory charging system.

Deltabox™ Connectivity
Our Powerbox Mini amplifiers have input options to ensure that any system can be utilised to connect to these amps. High quality RCA inputs offer 0.5v – 6v input voltage alongside a new Deltabox™ High level input circuit which gives Autosense remote turn on for use with factory systems. This eliminates the requirement to use a separate line level convertor and accepts an input voltage of up to 35v, offering a perfect range of connectivity. Deltabox™ High level input circuit paired with the High quality High Level inputs allows the amp to use a DC offset Auto sense turn on feature so no remote turn on is required when using this installation method, the DC offset method offers a much more stable and reliable turn on methodology compared to the traditional signal sensing.

OPTISOUND™ Advanced OEM integration
 

VIBE R&D partnered with the best amplifier designers in the car audio world to ensure our amplifiers perfectly integrate with the most modern of vehicles. Our amps feature technology that stops the auto-detection problems and OEM Error messages that are displayed if installing common amps into new modern vehicles. The technology stop the vehicle sensing changes in resistance therefore giving no installation issues, such as cutting out of speakers, disappearance of fader and more. Our Powerbox amps are perfect for OEM installation. The OPTISOUND Range has become the go to upgrade of choice for many dealers when forced to retain the factory head unit.

VIBE Sound Studio™ Active crossovers
 

Utilising High and Low pass filters with a natural 12dB slope allows the 4 channels of amplification to be run passive and active systems safely. The amp also feature an incredible 10Hz – 30kHz bandwidth when being used in FULL RANGE mode allowing you to take full advantage of even the highest ranging tweeters! This delivers suitable amplification for high bit rate sound reproduction and makes the VIBE POWERBOX range a great choice for demanding Sound Quality systems. The VIBE Sound Studio™ active crossover networks are a simple and easy way to run speakers fully active without the need for complex crossovers.

4 x 80w @ 4 ohms
4 x 100w @2 ohms
2x 240w @4 ohms
Maximum Power – 960 watts
Dimensions (H x W x D) – 1.9” x 9.1” x 5.3” (47x 230 x 134mm)
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 40Hz – 4kHz
Crossover Range – 10Hz – 50kHz
Class D

Retail: € 209,99

Vibe Powerbox60.4-V9

4 Channel Stereo Amplifier 640W

Includes remote control
Bridgeable Channels at 4 Ohm

The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

4 x 60w @ 4 ohm
maximum power 640w
Dimensions (H x W x D) – 2” x 9” x 7.6” (50mm x 229mm x 194mm)
RMS @ 2Ω Stereo – 4 x 80 watts
RMS @ 4Ω Mono – 2 x 160 watts
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 50Hz – 4kHz
Class AB Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
High level input with Autosense circuit allows the amplifier to turn on and off

Retail: € 169,99

Vibe Powerbox250.2-V0

2 Channel Stereo Amplifier 1400W

Includes remote control
Bridgeable Channels at 4 Ohm

The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

RMS @ 4Ω Stereo: 2 x 250W
RMS @ 2Ω Stereo: 2 x 350W
RMS @ 4Ω Mono: 1 x 700W
Maximum Power: 1400W
Frequency Response: 20Hz – 20kHz
Class AB Power Amplifiers
Onboard Active Crossovers
High Level Input with Auto Turn on Function
Variable Bass Boost Circuit
Anodised Extruded Aluminium Heatsink
Class AB Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
High level input with Autosense circuit allows the amplifier to turn on and off

Retail: € 179,99

Vibe Powerbox1000.1-V9

Mono Amplifier 1000W

Class D 1 Ohm stable Bass Amplifier
Includes remote control
Dicast terminals

The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin black finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

350w @ 4 ohm
Maximum power 2000 watts
Dimensions (H x W x D) – 2” x 14.1” x 7.6” (50mm x 358mm x 194mm
RMS @ 2Ω Mono – 700 watts
RMS @ 1Ω Mono – 1000 watts
Frequency Response – 10Hz – 350Hz
Crossover Type – LP / Subsonic
Crossover Range – 10Hz – 150Hz
Class D Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
Bass boost centred at 45Hz variable from 0dB – 6dB High level input with Autosense circuit allows the amplifier to turn on and off.

Retail: € 249,99

Vibe Powerbox65.4M-V7 MICRO AMP

4 Channel Amplifier 520W
4 Kanaals Versterker 520W MICRO AMP MINI AMP

mini versterker - compact 
mini amplifier 




Amplifies and upgrades almost any OEM or aftermarket radio
The biggest output micro amp on the market
Plug and Play adapters available for ease of install

Vibe’s latest amplifier technology allows us to deliver high performance in an incredibly small footprint. Our mono & 4 channel Powerbox micro amps are small, yet mighty, with up to 400w for bass and 4 x 65w for speakers. The small size enables easy installation. The 4 channel features a +12v remote output and daisy chain signal output making it an ideal system building block. The 4 channel amp has the option to fit with ISO T harness direct to the head unit this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play. For the bass amp, an ISOAWK kit (available separately) is available that can be purchased with the amp to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle just like the 4 channel.

4 x 65w @ 4 ohm
520w Peak 1.5″ x 7.4″ x 3.2″ (37mm x 187mm x 82mm)
Molex to ISO connection included to connect to OEM unit
Frequency response: 50Hz – 20kHz
Crossover type: HP/Full
Crossover range: 50Hz Class D micro amplifier

Retail: € 169,99

Vibe Powerbox400.1M-V7

1 Channel Amplifier 800W

Class D Small and Mighty Micro Amplifier
Ultra compact footprint for easy installation
Use with a Critical Link Rapid kit for the fastest fit


Small footprint, big impression! Vibe’s latest amplifier technology allows us to deliver high performance in an incredibly small footprint. Our mono & 4 channel Powerbox micro amps are small, yet mighty, with up to 400w for bass and 4 x 65w for speakers. The small size enables easy installation. The 4 channel features a +12v remote output and daisy chain signal output making it an ideal system building block. The 4 channel amp has the option to fit with ISO T harness direct to the head unit this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play. For the bass amp, an ISOAWK kit (available separately) is available that can be purchased with the amp to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle just like the 4 channel.

170w @ 4 ohm
800w Peak
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier

Retail: € 139,99

Vibe Slick12D2V0

12" Subwoofer 3000W

SLICK12D2
500 Watts RMS
3000 Watts MAX
Dual 2Ohm
Large Foam Roll Surround

With the biggest magnet assembly and highest level of motor force ever seen on our entry level subwoofers, the latest incarnation of SLICK from VIBE are the best subwoofers we have ever produced.

Using our well known VIBE designed Torsion basket we are able to house a large spider assembly which delivers the most excursion ever from an entry level subwoofer.

Featuring a high temperature 2” (50mm) 4 layer dual 2Ω voice coil, power handling has had a significant increase over the previous models.

All new semi pressed, composite FEA cone paired with a wide roll stitched foam surround deliver powerful low frequency response with outstanding fidelity.

Powerful • Precise • Versatile
The latest revision of the SLICK subwoofer is our best yet.

With the largest magnet structure we have every created in this range combined with precision engineered voice coil, spider pack and cone structure the Slick subwoofers deliver precise and deep bass.

All aspects of this subwoofer have been considered including our brand new dustcap design, engineered for added strength for the cone while giving a unique two tone floating affect not seen before.

The new Slick subwoofers also feature a wide roll foam surround allows huge excursion and delivery of even the lowest frequencies. Overall the best Slick series subwoofer we have ever made.

• 500 Watts RMS
• 1500 Watts Peak
• 3000 Watts SPL (BURP)
•DUAL 2OHM
• Composite paper Cone
• PP Dome Dust-cap
• 2″ OFC Voice Coil
• Poly Cotton Spider
• Bumped Backplate
• Butyl Foam Surround
• FEMM Motor
• Spring Loaded terminals

Retail: € 159,99

Vibe Slick10D2-V0

10" Subwoofer 1500W

• 500 Watts RMS
• 1500 Watts MAX
• Dual 2Ohm
• Large Foam Roll Surround

With the biggest magnet assembly and highest level of motor force ever seen on our entry level subwoofers, the latest incarnation of SLICK from VIBE are the best we have ever produced.

Using our well known VIBE designed Torsion basket we are able to house a large spider assembly which delivers the most excursion ever from an entry level subwoofer.

Featuring a high temperature 2” (50mm) 4 layer dual 2Ω voice coil, power handling has had a significant increase over the previous models.

All new semi pressed, composite FEA cone paired with a wide roll stitched foam surround deliver powerful low frequency response with outstanding fidelity.

Powerful • Precise • Versatile
The latest revision of the SLICK subwoofer is our best yet.

With the largest magnet structure we have every created in this range combined with precision engineered voice coil, spider pack and cone structure the Slick subwoofers deliver precise and deep bass.

All aspects of this subwoofer have been considered including our brand new dustcap design, engineered for added strength for the cone while giving a unique two tone floating affect not seen before.

The new Slick subwoofers also feature a wide roll foam surround allows huge excursion and delivery of even the lowest frequencies. Overall the best Slick series subwoofer we have ever made.

• 500 Watts RMS
• 1500 Watts Peak
• 3000 Watts SPL (BURP)
•DUAL 2OHM
• Composite paper Cone
• PP Dome Dust-cap
• 2″ OFC Voice Coil
• Poly Cotton Spider
• Bumped Backplate
• Butyl Foam Surround
• FEMM Motor
• Spring Loaded terminals

Retail: € 139,99

Vibe Slick8D2-V0

8" Subwoofer 1350W

450 Watts RMS
1350 Watts MAX
Dual 2 Ohms
Large Foam Roll Surround

With the biggest magnet assembly and highest level of motor force ever seen on our entry level subwoofers, the latest incarnation of SLICK from VIBE are the best we have ever produced.

Using our well known VIBE designed Torsion basket we are able to house a large spider assembly which delivers the most excursion ever from an entry level subwoofer.

Featuring a high temperature 2” (50mm) 4 layer dual 2Ω voice coil, power handling has had a significant increase over the previous models.

All new semi pressed, composite FEA cone paired with a wide roll stitched foam surround deliver powerful low frequency response with outstanding fidelity.

Powerful • Precise • Versatile
The latest revision of the SLICK subwoofer is our best yet.

With the largest magnet structure we have every created in this range combined with precision engineered voice coil, spider pack and cone structure the Slick subwoofers deliver precise and deep bass.

All aspects of this subwoofer have been considered including our brand new dustcap design, engineered for added strength for the cone while giving a unique two tone floating affect not seen before.

The new Slick subwoofers also feature a wide roll foam surround allows huge excursion and delivery of even the lowest frequencies. Overall the best Slick series subwoofer we have ever made.

• 450 Watts RMS
• 1350 Watts Peak
• 2700 Watts SPL (BURP)
•DUAL 2OHM
• Composite paper Cone
 PP Dome Dust-cap
• 2″ OFC Voice Coil
• Poly Cotton Spider
• Bumped Backplate
• Butyl Foam Surround
• FEMM Motor
• Spring Loaded terminals

Retail: € 109,99

Vibe SlickPro8M-V0

8,1" Speaker set 450/150W

• Non pressed paper cone
• Dual roll foam surround
• 25mm voice coil
• Polycotton spiders
• Spade terminal for easy connection
• Unique Rubber gasket

For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.

Type –   Pro audio midrange.
Configuration – 1-way
Speaker Size – 8.1” (206mm)
Peak/RMS Power – 450W / 150W
Sensitivity – 98dB
Frequency Response – 100Hz – 9kHz
Impedance – 4Ω
Mounting Depth – 3.4” (85mm)
Mounting Diameter – 7.2” (183mm)
Grill Included – No

Retail: € 84,99

Vibe SlickPro6M-V0

6,6" Speaker set 275/125W

• Non pressed paper cone
• Dual roll foam surround
• 25mm voice coil
• Polycotton spiders
• Spade terminal for easy connection
• Unique Rubber gasket

For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.

Type –   Pro audio midrange.
Configuration – 1-way
Speaker Size – 6.6” (167mm)
Peak/RMS Power – 275W / 125W
Sensitivity – 98dB
Frequency Response – 100Hz – 9kHz
Impedance – 4Ω
Mounting Depth – 1.9” (73mm)
Mounting Diameter – 5.7” (144mm)
Grill Included – No
Recommended Amp – POWERBOX250.2-V0

Retail: € 59,99

Vibe Slick6SQC-V7

6.5″ SET Compo 270W

VIBE’s mission with its Slick range of speakers was to produce a truly efficient speaker that delivered market leading performance. The VIBE R&D team developed the Slick SQ speaker from the ground up using their skill and expertise in speaker design to produce the most efficient VIBE speaker to date. The woofer design utilises a super lightweight paper composite cone and foam surround, a single layer spider and a 2 inch perfectly balanced and sized voice coil. The slick woofer can, therefore, deliver effortless bass and peerless vocal response at any power input.

The SQ version of the Slick series speaker includes a full Passive crossover network has tweeter attenuation and better quality components to enrich the already fantastic sound. The technology incorporated into the component tweeter is that of a product many times its cost. It's tiny 25mm size makes it one of the smallest on the market, coupled with British design, engineering and built from European components.

Aesthetically beautiful, precise in performance, with market leading efficiency.

SPECIFICATIONS
6.5″ 2 way component speaker
270w Peak
90w RMS
Sensitivity: 94dB
Frequency response: 54Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 2.4″ (61mm)
Mounting diameter: 5.6″ (142mm)
Ultra compact 25mm silk dome tweeter delivers an exceptional level of sound quality matched with high efficiency.
New heavier cone to allow more accurate bass and vocal response and better form to deal with the increased speaker BL
Larger motor than the standardised Slick6 which delivers a much greater motorforce allowing for a 25% power increase.
94db sensitivity rating, giving class leading speaker efficiency.
Full active crossover with high quality components
Modified VC for harmonised performance along side new motor and cone 
Stylish design allowing seamless system integration.

Retail: € 129,99

Vibe Slick69.3-V7

6" x 9" Speakerset 3-way 480W

Designed to replace factory speaker
Unique wideband tweeter

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

6″ x 9″ 3 way tri axial speaker
480w Peak
160w RMS
Sensitivity: 90dB
Frequency response: 50Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 3″ (76mm)
Mounting diameter: 5.7″x8.5″ (145mm x 215mm)
Grill included

Retail: € 129,00

Vibe Slick6C-V7

6.5" Speakerset 2-way 270W

Designed to replace factory speaker
SQ Sound

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

6.5″ 2 way component speaker
270w Peak
90w RMS
Best Product Mittleklasse Car & Hifi Magazine
Sensitivity: 94dB
Frequency response: 54Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 2.4″ (61mm)
Mounting diameter: 5.6″ (142mm)
Grill included

Retail: € 119,99

Vibe Slick5C-V7

5.25" Speakerset 2-weg 240W

Designed to replace factory speaker
SQ Sound

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

5.25″ 2 way component speaker
240w Peak
80w RMS
Sensitivity: 93dB
Frequency response: 60Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 1.8″ (46mm)
Mounting diameter: 4.4″ (112mm)
Grill included

Retail: € 99,99

Vibe Slick6-V7

6.5″ Speakerset 2-weg 240W

Designed to replace factory speaker
Unique wideband tweeter

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

6.5″ 2 way coaxial speaker
240w Peak
80w RMS
Price Tip Mittleklasse, Car & Hifi Magazine
Sensitivity: 94db
Frequency response: 54Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 2.4″ (61mm)
Mounting diameter: 5.6″ (142mm)
Grill included

Retail: € 64,99

Vibe Slick5-V7

5.25" Speakerset 2-weg 210W

Designed to replace factory speaker
Unique wideband tweeter

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

5.25″ 2 way coaxial speaker
210w Peak
70w RMS
Sensitivity: 92dB
Frequency response: 60Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 1.8″ (46mm)
Mounting diameter: 4.4″ (112mm)
Grill included

Retail: € 59,99

Vibe Slick57-V7

5″ x 7″ Speakerset 2-weg 240W


Designed to replace factory speaker
Unique wideband tweeter

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

5″ x 7″ 2 way coaxial speaker
240w Peak
80w RMS
Sensitivity: 92dB
Frequency response: 54Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 2.1″ (53mm)
Mounting diameter: 5″x7.1″ (126mm x 180mm)
No Grill included

Retail: € 64,99

Vibe Slick4-V7

4" Speakerset 2-weg 150W

Designed to replace factory speaker
Unique wideband tweeter

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

4″ 2 way coaxial speaker
150w Peak
50w RMS
Sensitivity: 91dB
Frequency response: 66Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 1.6″ (43mm)
Mounting diameter: 3.7″ (94mm)
No Grill included

Retail: € 49,99

Vibe Slick1-V7

2" Tweeterset 150W


Supplied with in-line filter
European Design

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

Specifications
2″ Tweeter, 150w Peak
50w RMS, 1 way
impedance 4 ohm
Sensitivity: 94dB
Frequency response: 1.5kHz – 25kHz
Mounting depth: 0.5″ (12mm)
mounting diameter: 1.5″ (39mm)
Grill included

Retail: € 32,99

Vibe BLACKAIR12D2-V7

12" Subwoofer 2250W


12″ High-Performance Subwoofer
Dual 2 Ohm Voice Coil
Push-fit terminals

The Black Air 12 inch Dual 2Ω Subwoofer is for those who want sound quality to be loud. The new Black Air subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, the Black Air 12 inch Dual 2Ω Subwoofer offers beautiful bass but with the aggression of the larger competition subwoofers.

2250w Peak
750w RMS
Sensitivity: 86 dB
Impedance dual 2 ohm
Frequency response: 25Hz – 850Hz
3″ 4 layer voice coil
Mounting depth: 7.5″ (190mm), mounting diameter: 11.1″ (283mm)
Enclosure volume: 1.5 – 2.5 cubic feet
Size: 12″
Configuration: Dual 2 ohm

Retail: € 269,99

Blaupunkt MILANO 170BT

Bluetooth - 4x 40 Watt

Product description: Blaupunkt Milano 170BT - Auto - Receiver (CD) - in-dash unit - Full-DIN product type Receiver (CD) Integrated components radio, CD player, USB host, micro SD card reader media content source USB host, audio formats with flash memory card WMA, MP3 dimensions (width x depth x height) 17.8 cm x 16 cm x 5 cm form factor full-DIN - in-dash unit sound output mode stereo sound effects X-BASS manufacturer equalizer settings rock, pop, classic, flat max. Output power / Number of channels 40 watts x 4 AM / FM radio

Detailed details
General Product type Receiver (CD) Recommended use
Automatic form factor
Full DIN - in-dash unit
Integrated components
Radio, CD player, USB host, micro SD card reader Media content source USB

Retail: € 129,00

Blaupunkt BPA 3022 M

BPA 3022 M - The multi-zone audio module for caravans and motorhomes

The Blaupunkt BPA 3022 M has been specially developed for use in caravans and motorhomes to play your favorite music anywhere thanks to the multi-zone function.

The powerful DAB+ and FM-RDS tuner and the extensive connectivity options with BT audio streaming, USB and Aux-IN will enliven your journey with countless music contents.

The highlight: In A2DP mode, the BPA 3022 M can wirelessly transmit the music signal to external Bluetooth speakers or headphones....Music even outside your caravan or motorhome.

RDS FM/AM High Quality Tuner
DAB+ tuner
LC display
Front USB
Front Aux Input
Front headphone jack
Bluetooth audio streaming
Bluetooth audio transmitter
HDMI passthrough
Pass video
2 zone function
sub out
Maximum power 4 x 40 watts

Retail: € 209,00

Blaupunkt MANCHESTER 110

Retail: € 119,00

Blaupunkt Porto 170

1 Din - 4x40w

Highlights
• FM (RDS), AM (MW,LW) Tuner
• Playback formats: MP3, WMA
• Playback from USB, SDHC, SD
• Data carrier: USB, SDHC, SD
• Front USB (Standard A-type)
• SDHC-card slot (behind panel)
• Front-Aux-in
• 4x40 Watt Max. + 2-channel Preamp-out
• 4-band, semi-parametric Equalizer
• Sound presets (Flat, Rock,Pop, Classic)
• X-Bass
• IR-Remote control included
• Release Panel

ANALOG RADIO
Type of tuner RDS Tuner
World band tuner (swtichable) EU, USA, South America
Wave bands FM 1,2,3,AM 1,2
Radio Data System (RDS) Alternative Frequency (AF)
Enhanced Other Networks (EON)
Regional Programme (REG)
Programme Service Name (PS)
Traffic Announcement (TA)
Traffic Program (TP)
Travelstore X (FM3)
Band Scan / Preset Scan X / X
Station memory 30
Sensitivity local (on / off)
Interference suppression X
Frequency response (Hz) -3 dB 40 – 12.000
DATA CARRIER
USB USB 2.0
Memory cards SDHC (up to 32 GB), SD,
Formatting USB / SD FAT 32, FAT 16
MEDIA-PLAYER
Playback format MP3, WMA
Title display ID3-tag, file, folder
EQUALIZER
Bass (at 100 Hz) +/- 10 dB
Treble (at 10kHz) +/- 10 dB
Balance / fader X / X
X-Bass X (on / off)
Sound presets Flat, rock, pop, classic
AMPLIFIER
Number of channels 4
Max. power 4 x 40 Watt
Sinus power at 14.4 V 4 x 18 Watt

AMPLIFIER
Number of channels 4
Max. power 4 x 40 Watt
Sinus power at 14.4 V 4 x 18 Watt
DISPLAY
Type LCD (1-line)
Colour negative, black and blue
View angle 12 o´clock
Clock display X
INPUTS
Antenna (number of) 1
USB (number of / type) 1 (front / standard A-Typ)
Memory cards X (behind front panel)
Aux-In (number of, type) 1 front (3,5 mm jack)
OUTPUTS
Loudspeaker (number of) 4
Pre-amplifier channel 2-channels (cinch)
Pre-amplifier voltage 4 V
GENERAL
Power supply requirements DC 12V, negative ground
Current drain 10 ampre (max.)
Height x Width x Depth (mm) 50 x 178 x 97
Software update via USB
Confirmation beep X (on/off)
Front panel Release panel
Panel Black
Encoder / key illumination Red / Red

Retail: € 79,00

Blaupunkt BRIGHTON 170BT

Single Din - Bluetooth - 4x40w

Blaupunkt Brighton 170 BT - Car radio
The Brighton 170 BT car radio is a reliable digital media receiver with built-in Bluetooth module that supports modern devices. The installation size is universal 1DIN, 50 mm high, 178 mm wide and 97 mm deep, suitable for all car interiors. The front panel is stationary, black, with a stylish red button illumination. LCD display, with red backlight and 12 o'clock viewing angle. The front panel has USB 2.0 and AUX connections. Required operating voltage DC 12 V.
Built-in tuner with digital signal processing, with convenient manual station search and the ability to automatically store 30 FM/AM radio stations. Support for RDS allows you to display the transmitted information in the form of a creeping line (for example: the exact time, temperature and exchange rates). The receiver supports audio formats MP3, WMA. Works in repeat, shuffle, track search and stop memory. You can connect devices and memory cards up to 32 GB via the USB port and SD slot. The built-in Bluetooth version 2.0 offers many additional functions: playing music, accessing the phonebook profile, making calls (hands-free), using the built-in microphone, which allows you to make calls without letting go of the steering wheel .
The radio has a built-in power amplifier for 4 channels, the maximum output power is 4x40 W, with a low and high pass filter. Equalizer parametric 4-band, with four settings: Flat, Rock, Pop, Classic.
Main functions:
FM (RDS), AM (MW, LW) tuner
Playback formats: MP3, WMA
USB, SDHC, SD Playback
Storage medium: USB, SDHC, SD
Integrated Bluetooth (HFP, A2DP)
Built-in microphone
USB front (standard type A)
SDHC card slot (behind the panel)
Front-Aux-in
4x40W Max. + 2 channel preamp
4-band semi-parametric EQ
Sound settings (flat, rock, pop, classic)
X-Bass
IR remote included
Detachable front panel
Characteristics:

Tuner Type: RDS Tuner
World Band Tuner (switchable): EU, US, South America
Wavebands: FM 1.2.3, AM 1.2
Radio Data System (RDS): Alternative Frequency (AF), Enhanced Other Networks (EON), Regional Program (REG), Service Program Name (PS), Traffic Information (TA), Traffic Program (TP)
Travel shop: yes (FM3)
Range Scan / Preset Scan: Yes / Yes
Transmitter Memory: 30
Sensitivity: local (on/off)
Interference suppression: yes
Frequency Response (Hz) -3 dB: 40 - 12,000
Bluetooth:

Supported Version: Bluetooth 2.0 with EDR
Supported profiles: HFP, A2DP
Audio stream: yes
Pairing (number of devices): 1
Hands-free calling: via micro radio speaker
Hands-free volume: X
Microphone: Built-in
Main functions: accept / disconnect
Data transfer:

USB: USB2.0
Memory Cards: SDHC (up to 32 GB), SD
Format: USB / SD FAT 32, FAT 16
Media player:

Playback format: MP3, WMA
Title Display: ID3 Tag, File, Folder
Equalizer:

Bass (at 100Hz): +/- 10dB
Treble (at 10 kHz): +/- 10 dB
Balance / fader: yes / yes
X-Bass: yes (on/off)
Sound Settings: Flat, Rock, Pop, Classic
General:

Number of channels: 4
Maximum. power: 4 x 40 W
Sine power at 14.4V: 4 x 18W
Power Requirements: DC 12V
Current: 10 amps (Max)
Height x Width x Depth (mm): 50 x 178 x 97
Software update: via USB
Confirmation Tone: Yes (On / Off)
Button illumination Red.
Demo mode: yes
IR remote control: Yes (included)

Retail: € 99,00

Blaupunkt Blaupunkt BPA-1121BT

Single Din - Bluetooth

A modern discless car radio with FM receiver, USB and AUX connections and a Bluetooth module that allows you to play music from portable devices such as smartphones or tablets. In addition, the Bluetooth module allows you to safely receive calls and talk through the speakerphone, without being distracted from driving.
The standard size of the car radio is standard 1DIN, which allows it to be installed in all vehicles, both domestic and foreign manufacturers. The front panel has brightly lit controls and the high-contrast display provides excellent visibility, even in direct sunlight. The display can show the frequency of the radio station, the name of the song being played, the source of the files and the selected equalizer mode.
The Blaupunkt BPA 1121 BT radio supports a remote control that allows you to use all the functions of the device, configure it, select an equalizer preset or adjust it to your liking.
The built-in amplifier allows you to connect 4 speakers with a power of up to 50 W each. USB drives up to 32 GB are supported.
Product Features

Blaupunkt BPA 1121 BT is a 1-DIN stereo radio. Specially designed for digital music and modern media. You can connect your smartphone and other devices with a USB interface cable to charge your device or enjoy clear, crisp sound. Use the AUX input on the front to connect external sources and listen to your favorite music.

The panel is removable, with blue backlit buttons. The radio tape recorder has a shortened body length (chassis), which greatly simplifies installation in a car. Bluetooth wireless technology: the ability to make hands-free calls, switch and listen to music from your smartphone without being distracted from the road - greatly increasing the safety of the journey. You can also tune in to one of the 30 preset FM radio stations for even more music content. The radio has a built-in MOSFET amplifier with an output power of 50 W for each of the four channels. This power is sufficient to reproduce high quality sound. If this power is not sufficient, you can always use the cinch output to connect the acoustics via an external amplifier.

Brand: Blaupunkt
Size: 1 DIN
Supported media: USB (diskless)
Detachable front panel: Yes
Button Illumination: Blue
Bluetooth Version: Bluetooth 4.2
USB: USB 1: Front USB (Standard A type)
Connections: 2 x RCA AUX (front)
ISO USB FM antenna connection
Maximum output power: 4 x 50 W
MOSFET Amplifier: Yes
Audio DAC: Yes
Bands: AM, FM
RDS Support: Yes
Number of memory cells for radio stations, (FM band): 30
Number of memory cells for radio stations, (AM range): 6
Automatic station selection and storage: Yes
Supported formats: MP3, WMA
Supported tags: ID3
Powered via USB port with current: 0.5 A
Functions: hands-free, audio transmission and control (A2DP1.2, AVRCP1.3)
File System: FAT12, FAT16, FAT32
Memory card support: SD/SDHC
Microphone: Built-in
Working voltage: 12V
Power consumption: 10 A
Dimensions: 178 x 97 x 50 mm
Front panel dimensions: 170 x 50 x 30 mm
Weight: 0.5kg

Retail: € 79,00

Blaupunkt Las Vegas

The Las Vegas 690 DAB NAV CAR combines high-quality design down to the last detail, an intuitive operating concept and a breathtaking range of functions. It impresses with its 6.75" TFT touchscreen and combines first-class RDS radio reception, a built-in DAB+ tuner, a large entertainment offer and many connection options for many types of mobile media. The Las Vegas 690 DAB has various serial interfaces such as Bluetooth, AUX, SDHC and USB allow you to comfortably play your music collection, but whatever you are looking for, the Las Vegas 690 DAB has a good answer for you.

Graphical interface
The Las Vegas 690 DAB also offers several customization options. The menu look can be composed to your own taste. Simply define a color (RGB) for the key illumination in the settings menu or select one of the four available colors for the menu icons. The choice is yours.

Optional navigation
With optional navigation, the Las Vegas 690 DAB becomes a first-class navigation system and allows you to reach any destination comfortably, quickly and relaxed. Traveling to unknown places will no longer be a problem. With the Navigation option, the Las Vegas 690 DAB always shows you the shortest or best route to reach your destination.

Navigation variants:
Las Vegas 690 DAB navigation ready
Las Vegas 690 DAB (NAV CAR) Europe car navigation with 12 months map update
Las Vegas 690 DAB (NAV TRUCK/CAMPING) Europe Truck-Camper Navigation with 12 months map update

Media Player
The continuous use of digital, mobile data and media has become completely self-evident. It is an absolute duty of modern terminals to support them. But only the bandwidth of supported media and formats makes all the difference. The Las Vegas 690 DAB makes no compromises. Audio, video and image formats are not only supported by the drive, but also micro SDHC cards and USB in particular. There are virtually no limits to the number of files on the particular medium. Even 20,000 files are no problem with the Las Vegas 690 DAB. So many tracks only make sense if the selection is still easy to make. Enjoy how playful this works with the Las Vegas 690 DAB.

Tune sound
Via the graphical interface of the Las Vegas 690 DAB, the parametric 10-band equalizer can be easily and precisely set for individual sound optimization in the vehicle. If "playing with the frequencies" isn't your thing, the "Easy EQ" is available with just 3 settings or a whole host of preset sound profiles. Depending on personal taste from pop, rock, techno, jazz to classical music.

digital radio
Enjoy crystal clear digital radio with the built-in DAB+ tuner. Enjoyment starts with the choice of programs. Whether browsing through the available ensembles and their program structure, or simply selecting from an alphabetical list of all programs.

Analog radio
With the high-end tuner of the CODEM IV generation from Blaupunkt, no compromises are made in terms of radio reception and RDS behavior. Once experienced, even in the most difficult of reception conditions, you will not want to miss it.

Bluetooth telephony
Once your smartphone's phone book is synced with the Las Vegas 690 DAB, comfortable communication while driving and via the audio system is no longer an issue. For the best speech quality, the integrated or an external microphone is available for the perfect installation situation.

Settings
Breathtaking functionality does not equate to complicated operation. All menus are consistently simple and clear, attractively designed and above all easy to use.

Steering wheel remote control
If your vehicle is equipped with a steering wheel remote control, you can use it together with the Blaupunkt Las Vergas 690 DAB via the SWC (Steering Remote Control). Thanks to the SWC function, the steering wheel remote control takes over the most important functions such as volume control, muting or Bluetooth from the radio. Another safety feature for the Blaupunkt SafeDrive philosophy.

rear view camera
Parking can be a precision job. The Las Vegas 690 DAB has a camera input (camera). This way you always keep an overview and nothing should go wrong.

Audio / Video Inputs
Flexibility is also given to your analog connections. The two AV inputs (AV-IN 1 and AV-IN 2) allow the permanent connection of external sources.

Permanent storage
Thanks to the built-in permanent memory, the Las Vegas 690 DAB can store user settings and presets in the event of a main power failure.

Operating concept
Optimal operating comfort is an important factor for driving safety. In particular, the volume control and switching from radio to navigation or access to the main menu should be quick and easy to access. Thanks to the control buttons (Home, Navigation

Retail: € 759,00

Blaupunkt PALMA 190 BT

Car radio double DIN Bluetooth handsfree

The Blaupunkt Palma is a ''short'' body double-din device. This means that the installation depth is only 10 cm. This is an advantage because there is sometimes a lot of cabling behind the already built-in radio, or because new cabling comes with the new unit.

Radio:
Automotive Tuner
FM (RDS), AM Tuner
RDS with AF, EON, PS, REG, TA & TP

Display:
LC-Display
Clock

Bluetooth:
Built-in Blutooth 4.2 Modul
Handfree calling and Audio
Streaming
Profile: HFP, A2DP
Phonebook access
Built-in microphone

Media Player:
Audio Playback from USB
Audio Playback fromats MP3, WMA
Selectable display -Modi (ID3-Tags,
files & folder)

Retail: € 159,00

Blaupunkt

Retail: € 1.699,00

Blaupunkt Madrid 200BT

FM/Bluetooth

Highlights
FM (RDS), AM
Playback formats: MP3, WMA
Fast reading from USB
Selectable display modes (file, folder, title, artist, album and time)
9 digit display
Integrated Bluetooth (HFP, A2DP)
Integrated microphone
USB on the front
Front Aux Input
4×40 watts max.
2 channel preamp
Sound presets (flat, rock, pop, classic)
X bass
Red button lighting
analog radio
Tuner Type: RDS Tuner
Frequency bands: 3×FM / 2×AM
Radio Data System (RDS): Alternative Frequency (AF), Clock Time (CT), Program Service Name (PS), Regional Program (REG), Traffic Information (TA), Traffic Program (TP)
Band Scan / Preset Scan: yes / no
Station Memory: 15 FM / 15 AM
Sensitivity: lo / dx
Noise reduction: yes
Frequency Response (Hz) -3dB: 20 ​​– 18,000


Bluetooth
Supported profiles: HFP,A2DP
Audio streaming: yes
Pairing (number of devices): 1
Hands-free calling: yes
Microphone: Integrated
Core functions: accept, end, reject, redial a call
Access to the mobile phone book: yes (up to 100 contacts per mobile phone)


Disk
USB: 1 × front


Media player
Playback formats: MP3, WMA
Title Display: ID Tag, Folder/File
Folder and file selection: no
Playback modes: yes (file, folder, title, artist, album, playing time)
Mix (Random Play) / Repeat / Scan: yes / yes / yes
Bit rate (kbps): 32 -320


Audio / Equalizer
Bass / Treble: yes / yes (+/- 7 steps)
Balance / Fader: yes / yes (+/- 9 steps)
X-Bass: yes
Sound Presets: Flat, Rock, Pop, Classic


Amplifier
Number of channels: 4
Maximum power: 4 × 40 watts
Sine output at 14.4 V: 4 × 20 watts


Screen
Type / Digits: 1-line / 9
Color: negative, black and white
Clock display: 24 / 12 hours


Inputs
Antenna (Number): 1 (FM ISO)
USB (quantity / type): 1 (front)
Aux-In (number/type): 1 front (3.5 mm jack)


Outputs
Speakers (Number): 4
Preamp (channels): 2 channels (RCA)
Preamp (voltage): 1.5 V (rms)


General
Software update: via USB
Confirmation beep: yes
Menu language: English
Control panel type: Repair panel
Key illumination: Red
Permanent storage after power failure: yes
Ignition logic: yes
Weight (kg): about 1.4
Dimensions (mm): 188×58×165
DAB Glass Antenna: Optional
ISO Connector Cable Satz: yes, 16 Pin Connector
Operational Manual: yes

Retail: € 109,00

Blaupunkt Valencia 200 DAB BT

DAB+/Bluetooth

Analog radio
Tuner Type: RDS Tuner
Frequency bands: 3×FM / 2×AM
Radio Data System (RDS): Alternative Frequency (AF), Clock Time (CT), Program Service Name (PS), Regional Program (REG), Traffic Information (TA), Traffic Program (TP)
Band Scan / Preset Scan: yes / no
Station Memory: 15 FM / 15 AM
Sensitivity: lo / dx
Noise reduction: yes
Frequency Response (Hz) -3dB: 20 ​​– 18,000


DAB functions
DAB / DAB+: yes/ yes
Service update: no
Service scan: yes
Station memory: yes
Ensemble / program browsing: no / yes
Program scan: no
Services link DAB-DAB: no
Services link DAB-FM: no
Services link DAB-DAB-FM: no
Radio text: no
PTY programs: no
Frequency Response (Hz) +/- 3dB: 20-18,000 Hz


Bluetooth
Supported profiles: HFP,A2DP
Audio streaming: yes
Pairing (number of devices): 1
Hands-free calling: yes
Microphone: Integrated
Core functions: accept, end, reject, redial a call
Access to the mobile phone book: yes (up to 100 contacts per mobile phone)


Disk
USB: 1 × front


Media player
Playback formats: MP3, WMA
Title Display: ID Tag, Folder/File
Folder and file selection: no
Playback modes: yes (file, folder, title, artist, album, playing time)
Mix (Random Play) / Repeat / Scan: yes / yes / yes
Bit rate (kbps): 32 -320


Audio / Equalizer
Bass / Treble: yes / yes (+/- 7 steps)
Balance / Fader: yes / yes (+/- 9 steps)
X-Bass: yes
Sound Presets: Flat, Rock, Pop, Classic


Amplifier
Number of channels: 4
Maximum power: 4 x 40 watts
Sine output at 14.4 V: 4 x 20 watts


Screen
Type / Digits: 1-line / 9
Color: negative, black and white
Clock display: 24 / 12 hours


Connections
Antenna (Number): 2 (FM ISO / DAB SMB 12V Phantom)
USB (quantity / type): 1 (front)
Aux-In (number/type): 1 front (3.5 mm jack)


Outputs
Speakers (Number): 4
Preamp (channels): 2 channels (RCA)
Preamp (voltage): 1.5 V (rms)


General
Software update: via USB
Confirmation beep: yes
Menu language: English
Control panel type: Repair panel
Key illumination: Red
Permanent storage after power failure: yes
Ignition logic: yes
Weight (kg): about 1.4
Dimensions (mm): 188×58×165
DAB Glass Antenna: Optional
ISO connector cable set: yes, 16-pin connector
User manual: yes

Retail: € 139,00

Blaupunkt Milano 200BT

Bluetooth/CD

Highlights
RDS tuner
FM (RDS), AM, Playback formats: MP3, WMA
Fast reading from USB
Selectable display modes (file, folder, title, artist, album and time)
CD DA, CD R, CD RW, USB
9 digit display
Integrated Bluetooth (HFP, A2DP)
Integrated microphone
USB on the front
Front Aux Input
4×40 watts max.
2 channel preamp
Sound presets (flat, rock, pop, classic)
X bass
Red button lighting
analog radio

Specifications
Tuner Type: RDS Tuner
Frequency bands: 3×FM / 2×AM
Radio Data System (RDS): Alternative Frequency (AF), Clock Time (CT), Program Service Name (PS), Regional Program (REG), Traffic Information (TA), Traffic Program (TP)
Band Scan / Preset Scan: yes / no
Station Memory: 15 FM / 15 AM
Sensitivity: lo / dx
Noise reduction: yes
Frequency Response (Hz) -3dB: 20 ​​– 18,000


Bluetooth
Supported profiles: HFP,A2DP
Audio streaming: yes
Pairing (number of devices): 1
Hands-free calling: yes
Microphone: Integrated
Core functions: accept, end, reject, redial a call
Access to the mobile phone book: yes (up to 100 contacts per mobile phone)


Disk
CD: CD-DA, CD-R, CD-RW
Drive type: automatic loading
USB: 1 × front


Media player
Playback formats: MP3, WMA
Title Display: ID Tag, Folder/File
Folder and file selection: no
Playback modes: yes (file, folder, title, artist, album, playing time)
Mix (Random Play) / Repeat / Scan: yes / yes / yes
Bit rate (kbps): 32 -320


CD player
Shockproof memory: yes
Frequency Response (Hz) -1dB: 20 ​​- 20,000


Audio / Equalizer
Bass / Treble: yes / yes (+/- 7 steps)
Balance / Fader: yes / yes (+/- 9 steps)
X-Bass: yes
Sound Presets: Flat, Rock, Pop, Classic


Amplifier
Number of channels: 4
Maximum power: 4 × 40 watts
Sine output at 14.4 V: 4 × 20 watts


Screen
Type / Digits: 1-line / 9
Color: negative, black and white
Clock display: 24 / 12 hours


Inputs
Antenna (Number): 1 (FM ISO)
USB (quantity / type): 1 (front)
Aux-In (number/type): 1 front (3.5 mm jack)


Outputs
Speakers (Number): 4
Preamp (channels): 2 channels (RCA)
Preamp (voltage): 1.5 V (rms)


General
Software update: via USB
Confirmation beep: yes
Menu language: English
Control panel type: Repair panel
Key illumination: Red
Permanent storage after power failure: yes
Ignition logic: yes
Weight (kg): about 1.4
Dimensions (mm): 188×58×165
DAB Glass Antenna: Optional
ISO connector cable set: yes, 16-pin connector
User manual: yes

Retail: € 139,00

Blaupunkt

Retail: € 59,95

Blaupunkt

Retail: € 49,95

Blaupunkt

Retail: € 49,95

Blaupunkt

Retail: € 49,95

Blaupunkt

Retail: € 69,00

Blaupunkt

Retail: € 79,00

Blaupunkt

Retail: € 49,95

Blaupunkt

Retail: € 89,00

Blaupunkt

Retail: € 1.599,00

Blaupunkt

Retail: € 1.299,00

Blaupunkt FIETE 500

20 inch e-folding bike at the highest level.


Extremely stable magnesium frame with an unmistakably cool design. The sporty bike with practical quick release mechanism.

Approx. 21 kg weight (incl. battery) up to 70 km range*

*The range depends on the load, driving style and area of use.

Intelligent clamping mechanism!
Equipped with an intelligent clamping mechanism, the Blaupunkt Fiete 500 can be easily folded and thus reduced in size by half. In just 4 steps, the folding e-bike becomes a handy “package”. The low weight of approx. 21 kg also makes it easy and comfortable to take with you on the bus and train.

Strong engine!
The strong 36-volt rear wheel hub motor with 50 Nm provides the perfect support, which together with the integrated and powerful lithium-ion battery forms a perfect team. The motor is durable and maintenance-free and to protect the battery, the integrated BMS (Battery Management System) always ensures an optimal energy supply.

LCD bike computer!
The 3 levels of the motor are controlled via the easy-to-read LCD computer. It also provides important information such as the current battery life, information about the route, speed and much more. The engine power can also be completely deactivated.

Retail: € 1.399,00

Blaupunkt

Retail: € 1.699,00

Blaupunkt

Retail: € 1.699,00

Blaupunkt

Retail: € 89,00

Blaupunkt

Retail: € 99,00

Blaupunkt

Retail: € 519,00