Go to all products

Products per page: 10 | 20 | 50 | 100 | All

Vibe BassPack Vibe Slick Pack8

Subwoofer incl Amp Pack

Retail: € 249,00

Vibe SLICKC10A-V0

Active Underseat Subwoofer

The all new SLICK C10 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.

This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.

We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.

The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.

Model – SLICKC10A-V0
Driver  – SLICK10S
Type  – Active bass enclosure
Peak/RMS Power  – 540W/180W
Impedance  – 4Ω
Dimensions (H x W x D)  – 2.9” x 10.2” x 13.6”  (73mm x 260mm x 345mm)
Configuration  – 2nd order acoustic suspension
Enclosure Type  – Slim Fit Bass Enclosure
• Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
• Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
• 0° / 180° Phase shift control.
• Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
• Low and high level input allows easy connection to both factory systems or aftermarket headunits.

Retail: € 219,99

Vibe SLICKV12-V2

1200 Watts Passive Bass Subwoofer Enclosure

Unique Amplifier Docking System allows easy fitment of the Powerbox 400.1M.
Ported enclosure delivers higher SPL and boosted bass response.
Hybrid vent incorporating a slot port and flared turbo ports.

Model: SLICK12V-V2
Driver: SLICK12
Type: Passive bass enclosure
Peak Power: 1200 Watts
RMS Power: 400 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 21.6″ x 11.3″ (355mm x 550mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure

Recommended Amplifier: POWERBOX400.1M-V7 (not included)

Retail: € 219,99

Vibe SLICKCBR12-V7

12″ High Output Bass Enclosure Enclosure


Designed to work with Powerbox 400.1M
Unique port design for extended low frequency response
The new Vibe Slick CBR enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.

1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure

Retail: € 229,99

Vibe VSAWK8-V1

8 AWG Slick Amp Wiring Kit

• 8 AWG CCA Power and Earth cable
• RCA, Remote, Power. Earth and Fuse Holder included
• Gold Plated connections

SPECIFICATIONS

• 5m 4AWG power cable
• 1m 4AWG ground cable
• 5m RCA interconnect
• 5m remote turn on wire
• 2 x 5m 16AWG speaker cable
• ANL fuse holder
• 60 amp ANL fuse

Retail: € 49,95

Vibe OPTISOUNDBMW4X-V0

Optisound 4 Inch BMW Plug and Play Component Speaker

OPTISOUNDBMW4x-V0 Car Specific Component
2-way, 4” (100mm)
115 watts RMS
345 watts Peak
55 watts Minimum input
Sensitivity 90dB
Frequency response 55Hz – 25kHz
Impedance 4Ω
Recommended amplifier: POWERBOX65.4M-V7

==================

Direct Replacement Front door speakers
BMW adaptors and cables included
OEM Upgrade

Easiest plug & play installation due to car-specific baskets and harnesses,

High-end crossover with reference curve setup, System can be used as passive or semi-active system

1-series

F20 5-door 2011 – Front door

F21 3-door 2011 – Front door

F40 5-door From 2019

2-series

F22 Coupe 2011 – Front door

F23 Convertible 2011 – Front door

F44 Grand Coupe From 2020

F45 Active Tourer From 2014

F46 Gran Tourer From 2015

F87 M2 Coupe From 2015

3-series

F30 Sedan 2012 – Front door / rear door

F31 Touring 2012 – Front door / rear door

F34 Gran Turismo 2013 – Front door / rear door

F35 Sedan Long Version 2012 – Front door / rear door

F80 M3 2014 – 2018

G20 Sedan Coupe From 2019

G21 Touring From 2019

4-series

F32 Coupe 2014 – Front door / rear door

F33 Convertible 2014 – Front door

F82 M4 Coupe From 2014

F83 M4 Convertible From 2014

5-series

G30 Sedan From 2017

G31 Touring From 2017

6-series

F12 Convertible 2011 – Front door / rear door

F13 Coupe 2011 – Front door / rear door

G32 Gran Tourismo From 2017

i8

L15 Roadstar From 2013

X1

F48 SUV From 2015

F49 SUV Long Version From 2015

X2

F39 SUV From 2018

X3

F25 SUV 2010 – Front door / rear door

F26 SUV From 2014

G01 SUV From 2017

X4

F26 SUV 2014 – Front door / rear door

G02 SUV From 2018

MINI

F54 Clubman 2. gen. From 2015

F55 5-door From 2014

F56 3-door From 2014

F57 Convertible From 2016


Retail: € 174,95

Vibe POWER-AIR-P8



Vibe BLACKAIRP8-V6

BlackAir Wheel Well Triple 8 Inch Passive Radiator Subwoofer Enclosure

● Unique design passive radiator technology.

● Unique mounting system allows mounting in most wheel arches to maximize space.

● Dual 4 Ohm voice coil configuration.

● Steel mesh grilles protect the woofer and passive radiator from possible damage.

● With spring-loaded clamps that can be used to connect heavy cable.



Specifications

●Model: BLACKAIRP8-V6

● 8″ passive subwoofer enclosure

● Peak power: 1200 watts

● RMS power: 400 watts

● Impedance: Dual 4 Ohms

Dimensions: 18.8" x 19.9" x 5.9" (477 x 505 x 150mm)

● Second order passive radiator housing

● Recommended amplifier: POWERBOX400.1M-V7

======================

Vibe Powerbox400.1M-V7

1 Channel Amplifier 800W

Class D small and powerful micro amplifier
Ultra-compact footprint for easy installation
Use with a Critical Link Rapid kit for the precise fit

Vibe's latest amplifier technology allows us to deliver high performance in a small footprint. Our mono and 4-channel Powerbox micro amps are small yet powerful, delivering up to 400W for bass and 4 x 65W for speakers. The small size allows for easy installation. The 4-channel has a +12v external output and a loop-through signal output, making it an ideal system building block. The 4 channel amplifier has the option to passenger with ISO T harness directly to the head unit, this provides audio signal and normal and ground meaning there is no need to connect a separate cable to the vehicle battery, plug-in and play. For the bass amplifier, an ISOAWK kit (sold separately) is available from to make it compatible with an ISO T harness to connect to the existing stereo wiring harness in the vehicle, just like the 4 channel.

170w @ 4 ohms
800w peak
1.5" x 6.2" x 3.2" (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohms
400w RMS @ 1 ohm
Frequency range: 10Hz – 500Hz
Crossover Type: LP/Subsonic
Crossover Range: 30Hz – 150Hz Class D Microamp

Retail: € 399,00

Vibe POWER-AIR-T12

SUBWOOFER + AMP

Vibe BLACKAIRT12S-V0

Slim 12" Passive Radiator Subwoofer Enclosure

●Unique design passive radiator technology

● Ultra-slim profile allows easy mounting in tight spaces

● Single 4 Ohm Voice Coil Configuration




Specification

● 12″ Slim Passive Subwoofer Enclosure

● 900w peak, 300w RMS

● Impedance: 4 ohms

● 14.2″ x 21.1″ x 5.2″ (361 x 535 x 131mm)

===================

Vibe Powerbox400.1M-V7

Share on:
1 Channel Amplifier 800W

Class D small and mighty micro amplifier
Ultra-compact footprint for easy installation
Use with a Critical Link Rapid kit for the fastest fit

Vibe's latest amplifier technology allows us to deliver high performance in an incredibly small footprint. Our mono and 4-channel Powerbox micro amps are small yet powerful, delivering up to 400W for bass and 4 x 65W for speakers. The small size allows for easy installation. The 4-channel has a +12v external output and a loop-through signal output, making it an ideal system building block. The 4 channel amplifier has the option to fit with ISO T harness directly to the head unit, this provides audio signal and power and ground meaning there is no need to connect a separate cable to the vehicle battery, just plug and play. An ISOAWK kit (sold separately) is available for the bass amp and can be purchased with the amp to make it compatible with an ISO T harness to connect to the existing stereo wiring harness in the vehicle, just like the 4 channel.

170w @ 4 ohms
800w peak
1.5" x 6.2" x 3.2" (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohms
400w RMS @ 1 ohm
Frequency range: 10Hz – 500Hz
Crossover Type: LP/Subsonic
Crossover Range: 30Hz – 150Hz Class D Microamp

Retail: € 379,00

Vibe RAPAWK5M

Critical Link 5m Rapid Fit Amp Wiring Kit
● Fastest Fitting Amp kit on the Market
● 500 watts capable
● RAPID FIT
Specifications
● Model: RAPAWK5M
● Power cable length: 5 Metres
● Ground cable length: 1.5 Metres
● Input cable length: 5 Metres
● Power / Ground cable diameter: 16awg
● Supplied fuse rating: 20A
● Maximum fuse rating: 30A.

Retail: € 34,99

Vibe CLDR-V7

Anti Vibe Sound Attenuating Roller

● Sound Attenuating Applicator
● For the perfect application of Butyl Sound Attenuating
● Rubber Roller with wooden handle

Retail: € 12,99

Vibe BLACKAIRT12S-V0

Slimline 12 inch Passive Radiator Subwoofer Enclosure


● Unique Design Passive Radiator technology
● Ultra slim profile allows easy fitment in tight spaces
● Single 4 Ohm Voice Coil Configuration
Specification
● 12″ Slim Passive Subwoofer Enclosure
● 900w Peak, 300w RMS
● Impedance: 4 ohm
● 14.2″ x 21.1″ x 5.2″ (361 x 535 x 131mm)

Retail: € 219,00

Vibe BLACKAIRP8-V6

BlackAir Wheel Well Triple 8 Inch Passive Radiator Subwoofer Enclosure


● Unique design passive radiator technology.

● Unique mounting system allows mounting in most wheel arches to create spectacular space

● Dual 4 Ohm voice coil configuration.

Steel mesh grilles protect the passive radiator from possible damage.

● Spring loaded clamps allow heavy cable connection.



Specifications

● Model: BLACKAIRP8-V6

● 8″ passive subwoofer enclosure

● Peak power: 1200 watts

● RMS power: 400 watts

● Impedance: dual 4 ohms

Dimensions: 18.8" x 19.9" x 5.9" (477 x 505 x 150 mm)

● Second order passive radiator housing

● Recommended amplifier : POWERBOX400.1M-V7

Retail: € 249,00

Vibe Opti-Slick Pack



Vibe OptisoundAuto8A-V2

Subwoofer under the seat 900W

Slimline and Underseat Applications
Amplifier and wiring kit included
Ported Enclosure Technology

These super-slim bass enclosures are designed to fit into even the smallest of spaces, while still providing the big bass response people have come to expect from VIBE.

Small, sleek and lightweight, these enclosures fit in any available space, behind a seat, under the seat or tucked away in your boot. The OptiSound enclosures are perfect for those looking to add bass to their system but want a stealth setup or don't have the space for a large enclosure.

Housing type. Configuration: Ventilated
Height 3” (75mm). Width 10.6" (270mm). Depth 15" (380mm)
Weight 4.66 kg
Driver LiteAir 8
Impedance 4Ω
RMS power 300 watts
Peak power 900 watts
TurboPort Labyrinth Slot Port
Features tight bass.

-----

Vibe Slick6SQC-V7

6.5″ SET Compo 270W

VIBE's mission with its Slick range of loudspeakers was to produce a truly efficient loudspeaker that delivered class-leading performance. The VIBE R&D team has developed the Slick SQ loudspeaker from scratch using their skills and expertise in loudspeaker design to produce the most efficient VIBE loudspeaker to date. The woofer design uses a super-lightweight paper composite cone and foam surround, a single-layer spider and a perfectly balanced 2-inch voice coil. The slick woofer can therefore deliver effortless bass and unparalleled vocal response at any input power.

The SQ version of the Slick Series loudspeaker features a fully passive crossover network with tweeter attenuation and higher quality components to enhance the already great sound. The technology incorporated into the component tweeter is that of a product that is many times more expensive. Its small size of 25mm makes it one of the smallest on the market, coupled with British design, engineering and built with European components.

Aesthetically beautiful, precise in performance, with class-leading efficiency.

SPECIFICATIONS:
6.5″ 2-way component speaker
270w peak
90w RMS
Sensitivity: 94dB
Frequency range: 54Hz – 25 kHz
Impedance 4 ohms
Mounting Depth: 2.4" (61mm)
Mounting Diameter: 5.6″ (142mm)
Ultra-compact 25mm silk dome tweeter delivers an exceptional level of sound quality combined with high efficiency.
New heavier cone for more accurate bass and vocal response and a better shape around the raised speaker BL . to handle
Larger engine than the standardized Slick6 that delivers much greater engine power, allowing a 25% increase in power.
94db sensitivity rating, giving industry-leading speaker efficiency.
Full active crossover with premium components
Modified VC for harmonized performance alongside new motor and cone
Stylish design for seamless system integration.

Retail: € 399,98

Vibe BDPRO3T-V7

3" tweeter 300W

BlackDeath 3 Inch Bullet Tweeter is fitted with a high efficiency compression driver with a cast aluminium flange and signature CNC detailing. Neodymium motor delivers extreme power and high SPL, Titanium diaphragm, 106 db sensitivity rating, giving class leading speaker efficiency, Inline passive crossover filter.

Model: BDPRO3T-V7
Type: Compression Driver
Configuration: 1-way
Speaker Size: 3” (75mm)
RMS Power: 100 watts
Peak Power: 300 watts
Minimum Input (RMS): 50 watts
Sensitivity: 106dB
Frequency Response: 2kHz – 25kHz
Impedance: 4Ω
Mounting Depth: 1.7” (43mm)
Mounting Diameter: 2.2” (57mm)

Retail: € 59,99

Vibe PULSE10-V0

10"subwoofer 1050W

Low budget doesn’t have to mean low performance! The PULSE10 is part of a series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled dustcap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

• 350 Watts RMS

• 1050 Watts Peak

• 2100 Watts SPL (BURP)

•Single 4Ω

• Pressed paper Cone

• PP Dome Dustcap

• 1.5″ OFC Voice Coil

• Poly Cotton Spider

• Bumped Backplate

• Butyl Foam Surround

Retail: € 89,00

Vibe PULSE12-V0

12" subwoofer 350W

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

• 350 Watts RMS

• 1050 Watts Peak

• 2100 Watts SPL (BURP)

•Single 4Ω

• Pressed paper Cone

• PP Dome Dustcap

• 1.5″ OFC Voice Coil

• Poly Cotton Spider

• Bumped Backplate

• Butyl Foam Surround

Retail: € 99,00

Vibe OPTIOSOUNDMERC8wr-V2

8" Subwoofer set 300W

An OEM (Original Equipment Manufacturer) upgrade is designed specifically for Mercedes Benz to replace the factory speaker without any compromise on the integrity of the vehicle or warranty.

All our OEM speaker upgrades come with all the relevant brackets and wiring connections for direct Plug & Play with the OEM connectivity.

By using high efficiency drivers and Neodymium magnets we are able to keep the speakers lightweight and easy to install.

• Composite cone using paper and wood fibres for a lightweight and rigid cone, producing a natural vocal reproduction.

• All drivers feature powerful Neodymium motors which deliver maximum magnetic force with shallow installation depth.

• Custom tooled 8 inch subwoofer directly replaces the under dash installed factory speakers and delivers improved bass performance.

Model – OPTISOUNDMERC8WR-V2

Type -Component

Configuration – 1-way

Speaker Size – 8” (00mm)

Peak/RMS – 300W/150W

Sensitivity – 88dB

Frequency Response – 35Hz – 250Hz

Impedance – 3.6Ω

Vehicle Manufacturer – Mercedes Benz

Fitment C-Class (A205/C205/W205/S205) E-Class (A238/C238/W213/S213) GLC (X253/C253)

Grille Included – Yes

Recommended Amp – POWERBOX400.1M-V7

Retail: € 389,99

Vibe OPTISOUNDMERC4-V2

4" 2way 180W Coaxial Speaker

An OEM (Original Equipment Manufacturer) upgrade is designed specifically for Mercedes Benz to replace the factory speaker without any compromise on the integrity of the vehicle or warranty.

All our OEM speaker upgrades come with all the relevant brackets and wiring connections for direct Plug & Play with the OEM connectivity.

By using high efficiency drivers and Neodymium magnets we are able to keep the speakers lightweight and easy to install.

• Composite cone using paper and wood fibres for a lightweight and rigid cone, producing a natural vocal reproduction.

• All drivers feature powerful Neodymium motors which deliver maximum magnetic force with shallow installation depth.

Model – OPTISOUNDMERC4C-V2 O

Type -CoAXIAL

Configuration – 2-way

Speaker Size – 4” (100mm)

Peak/RMS – 180W/60W

Sensitivity – 89dB

Frequency Response – 90Hz – 25kHz

Impedance – 4Ω

Vehicle Manufacturer – Mercedes Benz

Fitment C-Class (A205/C205/W205/S205) E-Class (A238/C238/W213/S213) GLC (X253/C253) S-Class (W222)

Grille Included – No

Recommended Amp – POWERBOX65.4M-V7

Retail: € 189,99

Vibe PULSE6-V0

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

6.5”(165mm) 2-way Coaxial speaker 180 Watt
Peak Power output – 60 Watts RMS
Frequency Response: 65HZ – 20KHZ
Sensitivity 91dB
Mounting Diameter 5.6” (141MM)
Mounting Depth 2.1” (53MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Steel Mesh Grill – Steel mesh grill provides protection for the woofer cone.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 46,99

Vibe PULSE5-V0

2way Speakerset 150W

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

5.25”(133mm) 2-way high efficiency coaxial speaker 150 Watt
Peak Power output – 50 Watts
RMS Frequency Response: 80HZ – 20KHZ
Sensitivity 90dB
Mounting Diameter 4.6” (117MM)
Mounting Depth 2” (50MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 44,99

NEED HELP?

WhatsApp Call me back