Go to all products

Products per page: 10 | 20 | 50 | 100 | All

Vibe POWERBOX5000.1P-V0

Amplifier - Monoblock - 10400W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high


Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 10.4” x 9.2” (66 x 265 x 233mm)

RMS @ 4Ω 1900 watts

RMS @ 2Ω 3300watts

RMS @ 1Ω 5200 watts

Maximum Power 10400 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 559,99

Vibe POWERBOX3000.1P-V2

AMPLIFIER - MONO - 6600W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high


Model POWERBOX3000.1P-V0

Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 7.3” x 9.2” (66 x 185 x 233mm)

RMS @ 4Ω 1100 watts

RMS @ 2Ω 2050watts

RMS @ 1Ω 3300 watts

Maximum Power 6600 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 379,99

Vibe POWERBOX1500.1P-V0

AMPLIFIER - 3000W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high




Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 7.3” x 9.2” (66 x 185 x 233mm)

RMS @ 4Ω 400 watts

RMS @ 2Ω 650 watts

RMS @ 1Ω 1500 watts

Maximum Power 3000 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 279,99

Vibe Powerbox150.4M-V0

4 Channel Amplifier 1920W

Class D Topology
Deltabox™ Connectivity
OPTISOUND™ Advanced OEM integration
VIBE Sound Studio™ Active crossovers
Auto Sense Turn on

VIBE British Audio introduces the brand new the 2020 POWERBOX  amplifier range!

Building on the success of our ground breaking Powerbox Micro amplifiers, we are proud to announce the more powerful and evolved Powerbox Mini range of four channel amplifiers.

Taking everything that was already great about the Micro amplifiers, our engineers pushed the small footprint platform to the next level.

Amplifier Topology

The range of Powerbox Mini class D multi-channel amplifiers feature a MOSFET output stage usually reserved for large platform amplifiers, the class D topology is much more efficient that the traditional class AB used in this style amplifier, this means the amp can be smaller and stay much cooler during operation. This delivers not only higher power output but also fantastic sound quality and the ability to bridge channels to drive a subwoofer making these a perfect one amplifier solution. The high efficiency design means less current draw and less strain on the factory charging system.

Deltabox™ Connectivity

Our Powerbox Mini amplifiers have inputs options to ensure that any system can be utilised to connect to these amps. Our high quality RCA inputs offer 0.5v – 6v input voltage alongside a new Deltabox™ High level input circuit which gives Autosense remote turn on for use with factory systems. This eliminates the requirement to use a separate line level convertor and accepts an input voltage of up to 35v! This offers a perfect range of connectivity. Deltabox™ High level input circuit paired with the High quality High Level inputs allows the amp to use a DC offset Auto sense turn on feature so no remote turn on is required when using this installation method, the DC offset method offers a much more stable and reliable turn on methodology compared to the traditional signal sensing.

OPTISOUND™ Advanced OEM integration

 

VIBE R&D partnered with the best amplifier designers in the car audio world to ensure our amplifiers perfectly integrate with the most modern of vehicles. Our amps feature technology that stops the autodetection problems and OEM Error messages that are displayed if installing common amps into new modern vehicles. The technology stop the vehicle sensing changes in resistance therefore giving no installation issues, such as cutting out of speakers, disappearance of fader and more. Our Powerbox amps are perfect for OEM installation. The OPTISOUND Range has become the go to upgrade of choice for many dealers when forced to retain the factory head unit.

VIBE Sound Studio™ Active crossovers

 

Utilising High and Low pass filters with a natural 12dB slope allows the 4 channels of amplification to be run passive and active systems safely. The amp also feature an incredible 10hz – 30Khz bandwidth when being used in FULL RANGE mode allowing you to take full advantage of even the highest ranging tweeters! This delivers suitable amplification for high bit rate sound reproduction and makes the VIBE POWERBOX range a great choice for demanding Sound Quality systems. The VIBE Sound Studio™ active crossover networks are a simple and easy way to run speakers fully active without the need for complex crossovers.

4 x 150w @ 4 ohm
4 x 240w @2 ohm
2x 480w @4ohm
Maximum Power – 1920 watts
Dimensions (H x W x D) – 1.9” x 15.4” x 5.3” (47x 390 x 134mm)
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 40Hz – 4kHz
Crossover Range – 10Hz – 50kHz
Class D

Retail: € 279,99

Vibe Powerbox100.4M-V0

4 Channel Amplifier 120W

Class D Topology
Deltabox™ Connectivity
OPTISOUND™ Advanced OEM integration
VIBE Sound Studio™ Active crossovers
Auto Sense Turn on

VIBE British Audio introduces the 2020 POWERBOX  amplifier range!

Building on the success of our ground breaking Powerbox Micro amplifiers, we are proud to announce the more powerful and evolved Powerbox Mini range of four channel amplifiers. By taking everything that was already great about the Micro amplifiers, our engineers pushed the small footprint platform to the next level.

Amplifier Topology
The range of Powerbox Mini class D multi-channel amplifiers feature a MOSFET output stage usually reserved for large platform amplifiers. The class D topology is much more efficient that the traditional class AB used in this style amplifier because the amp can be smaller and stay much cooler during operation. This delivers not only higher power output but also fantastic sound quality and the ability to bridge channels to drive a subwoofer. Making these a perfect one amplifier solution. The high efficiency design means less current draw and less strain on the factory charging system.

Deltabox™ Connectivity
Our Powerbox Mini amplifiers have inputs options to ensure that any system can be utilised to connect to these amps. Our high quality RCA inputs offer 0.5v – 6v input voltage alongside a new Deltabox™ High level input circuit which gives Autosense remote turn on for use with factory systems. This eliminates the requirement to use a separate line level convertor and accepts an input voltage of up to 35v! This offers a perfect range of connectivity. Deltabox™ High level input circuit paired with the High quality High Level inputs, allows the amp to use a DC offset Auto sense turn on feature so no remote turn on is required when using this installation method. The DC offset method offers a much more stable and reliable turn on methodology compared to the traditional signal sensing.

OPTISOUND™ Advanced OEM integration
 

VIBE R&D partnered with the best amplifier designers in the car audio world to ensure our amplifiers perfectly integrate with the most modern of vehicles. Our amps feature technology that stops the auto-detection problems and OEM Error messages that are displayed if installing common amps into new modern vehicles. The technology stop the vehicle sensing changes in resistance therefore giving no installation issues, such as cutting out of speakers, disappearance of fader and more. Our Powerbox amps are perfect for OEM installation. The OPTISOUND Range has become the go to upgrade of choice for many dealers when forced to retain the factory head unit.

VIBE Sound Studio™ Active crossovers
 

Utilising High and Low pass filters with a natural 12dB slope allows the 4 channels of amplification to be run passive and active systems safely. The amp also features an incredible 10Hz – 30kHz bandwidth when being used in FULL RANGE mode allowing you to take full advantage of even the highest ranging tweeters! This delivers suitable amplification for high bit rate sound reproduction and makes the VIBE POWERBOX range a great choice for demanding Sound Quality systems. The VIBE Sound Studio™ active crossover networks are a simple and easy way to run speakers fully active without the need for complex crossovers.

4 x 100w @ 4 ohm
4 x 120w @2 ohm
2x 240w @4ohm
Maximum Power – 960 watts
Dimensions (H x W x D) – 1.9” x 9.1” x 5.3” (47x 230 x 134mm)
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 40Hz – 4kHz
Crossover Range – 10Hz – 50kHz
Class D

Retail: € 229,99

Vibe Powerbox80.4MV0

4 Channel Amplifier 960W

Class D Topology
Deltabox™ Connectivity
OPTISOUND™ Advanced OEM integration
VIBE Sound Studio™ Active crossovers
Auto Sense Turn on

VIBE British Audio introduces the brand new the 2020 POWERBOX  amplifier range!

Building on the success of our ground breaking Powerbox Micro amplifiers, We are proud to announce the more powerful and evolved Powerbox Mini range of four channel amplifiers.

Taking everything that was already great about the Micro amplifiers, our engineers pushed the small footprint platform to the next level.

Amplifier Topology
The range of Powerbox Mini class D multi-channel amplifiers feature a MOSFET output stage usually reserved for large platform amplifiers. Class D topology is much more efficient than the traditional class AB used in this style amplifier. This means the amp can be smaller and stay much cooler during operation. This delivers not only higher power output but also fantastic sound quality. With the added ability to bridge channels to drive a subwoofer making these a perfect one amplifier solution. The high efficiency design means less current draw and less strain on the factory charging system.

Deltabox™ Connectivity
Our Powerbox Mini amplifiers have input options to ensure that any system can be utilised to connect to these amps. High quality RCA inputs offer 0.5v – 6v input voltage alongside a new Deltabox™ High level input circuit which gives Autosense remote turn on for use with factory systems. This eliminates the requirement to use a separate line level convertor and accepts an input voltage of up to 35v, offering a perfect range of connectivity. Deltabox™ High level input circuit paired with the High quality High Level inputs allows the amp to use a DC offset Auto sense turn on feature so no remote turn on is required when using this installation method, the DC offset method offers a much more stable and reliable turn on methodology compared to the traditional signal sensing.

OPTISOUND™ Advanced OEM integration
 

VIBE R&D partnered with the best amplifier designers in the car audio world to ensure our amplifiers perfectly integrate with the most modern of vehicles. Our amps feature technology that stops the auto-detection problems and OEM Error messages that are displayed if installing common amps into new modern vehicles. The technology stop the vehicle sensing changes in resistance therefore giving no installation issues, such as cutting out of speakers, disappearance of fader and more. Our Powerbox amps are perfect for OEM installation. The OPTISOUND Range has become the go to upgrade of choice for many dealers when forced to retain the factory head unit.

VIBE Sound Studio™ Active crossovers
 

Utilising High and Low pass filters with a natural 12dB slope allows the 4 channels of amplification to be run passive and active systems safely. The amp also feature an incredible 10Hz – 30kHz bandwidth when being used in FULL RANGE mode allowing you to take full advantage of even the highest ranging tweeters! This delivers suitable amplification for high bit rate sound reproduction and makes the VIBE POWERBOX range a great choice for demanding Sound Quality systems. The VIBE Sound Studio™ active crossover networks are a simple and easy way to run speakers fully active without the need for complex crossovers.

4 x 80w @ 4 ohms
4 x 100w @2 ohms
2x 240w @4 ohms
Maximum Power – 960 watts
Dimensions (H x W x D) – 1.9” x 9.1” x 5.3” (47x 230 x 134mm)
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 40Hz – 4kHz
Crossover Range – 10Hz – 50kHz
Class D

Retail: € 209,99

Vibe Powerbox60.4-V9

4 Channel Stereo Amplifier 640W

Includes remote control
Bridgeable Channels at 4 Ohm

The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

4 x 60w @ 4 ohm
maximum power 640w
Dimensions (H x W x D) – 2” x 9” x 7.6” (50mm x 229mm x 194mm)
RMS @ 2Ω Stereo – 4 x 80 watts
RMS @ 4Ω Mono – 2 x 160 watts
Frequency Response – 20Hz – 20kHz
Crossover Type – LP / HP / Flat
Crossover Range – 50Hz – 4kHz
Class AB Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
High level input with Autosense circuit allows the amplifier to turn on and off

Retail: € 169,99

Vibe Powerbox250.2-V0

2 Channel Stereo Amplifier 1400W

Includes remote control
Bridgeable Channels at 4 Ohm

The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

RMS @ 4Ω Stereo: 2 x 250W
RMS @ 2Ω Stereo: 2 x 350W
RMS @ 4Ω Mono: 1 x 700W
Maximum Power: 1400W
Frequency Response: 20Hz – 20kHz
Class AB Power Amplifiers
Onboard Active Crossovers
High Level Input with Auto Turn on Function
Variable Bass Boost Circuit
Anodised Extruded Aluminium Heatsink
Class AB Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
High level input with Autosense circuit allows the amplifier to turn on and off

Retail: € 179,99

Vibe Powerbox1000.1-V9

Mono Amplifier 1000W

Class D 1 Ohm stable Bass Amplifier
Includes remote control
Dicast terminals

The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin black finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

350w @ 4 ohm
Maximum power 2000 watts
Dimensions (H x W x D) – 2” x 14.1” x 7.6” (50mm x 358mm x 194mm
RMS @ 2Ω Mono – 700 watts
RMS @ 1Ω Mono – 1000 watts
Frequency Response – 10Hz – 350Hz
Crossover Type – LP / Subsonic
Crossover Range – 10Hz – 150Hz
Class D Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
Bass boost centred at 45Hz variable from 0dB – 6dB High level input with Autosense circuit allows the amplifier to turn on and off.

Retail: € 249,99

Vibe Powerbox65.4M-V7 MICRO AMP

4 Channel Amplifier 520W
4 Kanaals Versterker 520W MICRO AMP MINI AMP

mini versterker - compact 
mini amplifier 




Amplifies and upgrades almost any OEM or aftermarket radio
The biggest output micro amp on the market
Plug and Play adapters available for ease of install

Vibe’s latest amplifier technology allows us to deliver high performance in an incredibly small footprint. Our mono & 4 channel Powerbox micro amps are small, yet mighty, with up to 400w for bass and 4 x 65w for speakers. The small size enables easy installation. The 4 channel features a +12v remote output and daisy chain signal output making it an ideal system building block. The 4 channel amp has the option to fit with ISO T harness direct to the head unit this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play. For the bass amp, an ISOAWK kit (available separately) is available that can be purchased with the amp to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle just like the 4 channel.

4 x 65w @ 4 ohm
520w Peak 1.5″ x 7.4″ x 3.2″ (37mm x 187mm x 82mm)
Molex to ISO connection included to connect to OEM unit
Frequency response: 50Hz – 20kHz
Crossover type: HP/Full
Crossover range: 50Hz Class D micro amplifier

Retail: € 169,99

NEED HELP?

WhatsApp Call me back