Go to all products

Products per page: 10 | 20 | 50 | 100 | All

Vibe SLICKV12-V2

1200 Watts Passive Bass Subwoofer Enclosure

Unique Amplifier Docking System allows easy fitment of the Powerbox 400.1M.
Ported enclosure delivers higher SPL and boosted bass response.
Hybrid vent incorporating a slot port and flared turbo ports.

Model: SLICK12V-V2
Driver: SLICK12
Type: Passive bass enclosure
Peak Power: 1200 Watts
RMS Power: 400 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 21.6″ x 11.3″ (355mm x 550mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure

Recommended Amplifier: POWERBOX400.1M-V7 (not included)

Retail: € 219,99

Vibe SLICKCBR12-V7

12″ High Output Bass Enclosure Enclosure


Designed to work with Powerbox 400.1M
Unique port design for extended low frequency response
The new Vibe Slick CBR enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.

1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure

Retail: € 229,99

Vibe OPTISOUNDBMW4X-V0

Optisound 4 Inch BMW Plug and Play Component Speaker

OPTISOUNDBMW4x-V0 Car Specific Component
2-way, 4” (100mm)
115 watts RMS
345 watts Peak
55 watts Minimum input
Sensitivity 90dB
Frequency response 55Hz – 25kHz
Impedance 4Ω
Recommended amplifier: POWERBOX65.4M-V7

==================

Direct Replacement Front door speakers
BMW adaptors and cables included
OEM Upgrade

Easiest plug & play installation due to car-specific baskets and harnesses,

High-end crossover with reference curve setup, System can be used as passive or semi-active system

1-series

F20 5-door 2011 – Front door

F21 3-door 2011 – Front door

F40 5-door From 2019

2-series

F22 Coupe 2011 – Front door

F23 Convertible 2011 – Front door

F44 Grand Coupe From 2020

F45 Active Tourer From 2014

F46 Gran Tourer From 2015

F87 M2 Coupe From 2015

3-series

F30 Sedan 2012 – Front door / rear door

F31 Touring 2012 – Front door / rear door

F34 Gran Turismo 2013 – Front door / rear door

F35 Sedan Long Version 2012 – Front door / rear door

F80 M3 2014 – 2018

G20 Sedan Coupe From 2019

G21 Touring From 2019

4-series

F32 Coupe 2014 – Front door / rear door

F33 Convertible 2014 – Front door

F82 M4 Coupe From 2014

F83 M4 Convertible From 2014

5-series

G30 Sedan From 2017

G31 Touring From 2017

6-series

F12 Convertible 2011 – Front door / rear door

F13 Coupe 2011 – Front door / rear door

G32 Gran Tourismo From 2017

i8

L15 Roadstar From 2013

X1

F48 SUV From 2015

F49 SUV Long Version From 2015

X2

F39 SUV From 2018

X3

F25 SUV 2010 – Front door / rear door

F26 SUV From 2014

G01 SUV From 2017

X4

F26 SUV 2014 – Front door / rear door

G02 SUV From 2018

MINI

F54 Clubman 2. gen. From 2015

F55 5-door From 2014

F56 3-door From 2014

F57 Convertible From 2016


Retail: € 174,95

Vibe BDPRO3T-V7

3" tweeter 300W

BlackDeath 3 Inch Bullet Tweeter is fitted with a high efficiency compression driver with a cast aluminium flange and signature CNC detailing. Neodymium motor delivers extreme power and high SPL, Titanium diaphragm, 106 db sensitivity rating, giving class leading speaker efficiency, Inline passive crossover filter.

Model: BDPRO3T-V7
Type: Compression Driver
Configuration: 1-way
Speaker Size: 3” (75mm)
RMS Power: 100 watts
Peak Power: 300 watts
Minimum Input (RMS): 50 watts
Sensitivity: 106dB
Frequency Response: 2kHz – 25kHz
Impedance: 4Ω
Mounting Depth: 1.7” (43mm)
Mounting Diameter: 2.2” (57mm)

Retail: € 59,99

Vibe OPTISOUNDMERC4-V2

4" 2way 180W Coaxial Speaker

An OEM (Original Equipment Manufacturer) upgrade is designed specifically for Mercedes Benz to replace the factory speaker without any compromise on the integrity of the vehicle or warranty.

All our OEM speaker upgrades come with all the relevant brackets and wiring connections for direct Plug & Play with the OEM connectivity.

By using high efficiency drivers and Neodymium magnets we are able to keep the speakers lightweight and easy to install.

• Composite cone using paper and wood fibres for a lightweight and rigid cone, producing a natural vocal reproduction.

• All drivers feature powerful Neodymium motors which deliver maximum magnetic force with shallow installation depth.

Model – OPTISOUNDMERC4C-V2 O

Type -CoAXIAL

Configuration – 2-way

Speaker Size – 4” (100mm)

Peak/RMS – 180W/60W

Sensitivity – 89dB

Frequency Response – 90Hz – 25kHz

Impedance – 4Ω

Vehicle Manufacturer – Mercedes Benz

Fitment C-Class (A205/C205/W205/S205) E-Class (A238/C238/W213/S213) GLC (X253/C253) S-Class (W222)

Grille Included – No

Recommended Amp – POWERBOX65.4M-V7

Retail: € 189,99

Vibe PULSE6-V0

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

6.5”(165mm) 2-way Coaxial speaker 180 Watt
Peak Power output – 60 Watts RMS
Frequency Response: 65HZ – 20KHZ
Sensitivity 91dB
Mounting Diameter 5.6” (141MM)
Mounting Depth 2.1” (53MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Steel Mesh Grill – Steel mesh grill provides protection for the woofer cone.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 46,99

Vibe PULSE5-V0

2way Speakerset 150W

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

5.25”(133mm) 2-way high efficiency coaxial speaker 150 Watt
Peak Power output – 50 Watts
RMS Frequency Response: 80HZ – 20KHZ
Sensitivity 90dB
Mounting Diameter 4.6” (117MM)
Mounting Depth 2” (50MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 44,99

Vibe PULSE4-V0

4" Luidsprekerset 120 Watt

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 35,99

Vibe CBR 12 BASS PACK

Monoblock Amplifier & Bass Enclosure

Monoblock Amplifier
“The world’s most powerful active amplifier with five
times more power than traditional active amplifiers.”

• The 400.1M is exactly the same width as a US $1 bill.
• Ultra compact size allows the amplifier to be hidden easily in
an OEM install.
• Optional ISO connection allows a direct inline connection to
factory source units.
• Perfect for OEM integration and aftermarket applications with
high level input and auto sense.
• Low pass crossover filter and bass boost.

Model POWERBOX400.1M-V7
Configuration Monoblock
Dimensions (H x W x D) 1.5” x 6.2” x 3.2”
(37mm x 157mm x 82mm)
RMS @ 4Ω Mono 170 watts
RMS @ 2Ω Mono 250 watts
RMS @ 1Ω Mono 400 watts
Maximum Power 800 watts
Frequency Response 10Hz - 500Hz
Crossover Type LP / Subsonic
Crossover Range 30Hz - 150Hz
Topology Micro Class D

=========================

Bass Enclosure
“The PULSE CBR12 is quire simply the best bang for
the buck on the market”

• 4th Order bass reflex enclosure.
• Ported enclosure delivers higher SPL and boosted bass
response.
• Flared turbo port reduces distprtion and smooths airflow.
• Compatible with rapid fit kit for fast and easy installation
without needing to directly connect to the vehicles battery

Model PULSECBR12-V7
Driver PULSE 12
Type Passive bass enclosure
Peak/RMS Power 900W/300W
Impedance 2Ω
Dimensions (H x W x D)
13.9” x 21.6” x 16.7”
(354mm x 550mm x 425mm)
Configuration 4th order bass reflex
Enclosure Type Trapezius Bass Enclosure
Recommended Amplifier POWERBOX400.1M

Retail: € 399,00

Vibe BLACKAIR15D2-V7

15 INCH - 300W - WOOFER

For those who want sound quality to be loud. The new Blackair subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. 10, 12 and 15″ variants offer a solution for everyone with power ranging from 600w to 1000w RMS. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, these subwoofers offer beautiful bass but with the aggression of the larger competition subwoofers.

3000w Peak
1000w RMS
Sensitivity: 89 dB
Impedance dual 2 ohm
Frequency response: 20Hz – 850Hz
3″ 4 layer voice coil
Mounting depth: 8.7″” (220mm), mounting diameter: 13.8″ (350mm)
Enclosure volume: 2 – 4 cubic feet

Retail: € 299,00

NEED HELP?

WhatsApp Call me back