JBL RALLYBAR XL is a IP66 rated water resistant Bluetooth® Soundbar with 300Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation.
Each RALLYBAR XL can be used by itself or connected to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode.
The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements.
Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.
* Transducers 8x 2.75”(70mm) woofers, 2x 1”(25mm) Tweeters, 4 x 7.2"(182.8mm) x3"(76.2mm) Racetrack Passive Radiators
* Output Power 300WRMS, 600W PEAK (IEC60268)
THD at Rated RMS Power < 1%
* Voltage Range: 9.6 - 16VDC
* Quiescent Current Draw < 0.9A
* Maximum Current Draw 40A
* Frequency response 45Hz-40kHz
* Signal-to-noise Ratio > 80 dB
* Cable type 10 AWG
* Cable length 12 Feet (3.66m)
* Bluetooth® Version 5.3
* Bluetooth® profile A2DP V1.3, AVRCP V1.6
* Bluetooth® transmitter frequency range 2400 MHz – 2483.5 MHz
* Bluetooth® transmitter power ≤ 15 dBm (EIRP)
* Aux-In 2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
* Aux-Out 2 Vrms (3.5 mm connector)
* USB format FAT16, FAT32
* Soundbar Dimension (L x W x H) 35-11/32" x 5" x 4-5/8" (897.5 x 126.7 x 118mm)
* Soundbar Weight 20.83 lbs (9.45 kg)
* Packaging dimensions (W x H x D) 38.2" x 9" x 7.6" (971 x 229 x 193mm)
* Gross weight 27.5 lbs (12.52 kg)
Retail:
€ 1.299,00
Underseat Subwoofer
Ultra-Compact, Super Bass, Powerful
JBL BassPro LITE delivers deep bass and takes up ultra-compact space.
JBL’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100Watts Amplifier, BassPro LITE delivers accurate, tight bass you would expect from JBL, all while running cool and drawing minimal current from your vehicles charging system.
Features
Big Bass,ultra-compact space
Upgrade easier, Connected in series
Intelligent Electronic Design for Reliable and Extraordinary Performance
Die-Casting Aluminum Enclosure Design
Bass boost Volume Control
Features and Benefits
Big Bass,ultra-compact space
JBL BassPro LITE delivers deep bass and takes up ultra-compact space. Its onboard 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.
Upgrade easier, Connected in series
JBL BassPro LITE can be connected in series for user upgrade to purchase 2 set devices. The secondary BassPro LITE is still adjusted by them-self without extra Power / Single complex wires
Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassPro LITE employs high-pass filters and limiters that deliver exceptional at-the-limits performance.
Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design is not only Ultra-compact size, but the ALL IN ONE is combined elegant JBL industry design element and powerful acoustic performance.
Bass boost Volume Control
Bass boost Volume control is intergraded on I/O panel to let you adjust the sound freely
Technical Specifications
Driver Complement: super powerful 7”(178mm) Subwoofer
Amplifier Power: Class D, 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 15 A
Quiescent Current Draw: Input Sensitivity: 0.18 V – 5.0 V Low-
Level Input; 0.75 V – 20V High-Level Input
Crossover Frequency: 50 Hz – 150 Hz
Crossover Slope: 12 dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 10-1/4” x 8” x 2-9/16” (259.6mm x 203.1mm x 65.5mm)
Weight: 8 lbs (3.5kg)
What’s in the box
1x Under seat subwoofer
4x Screws
2x Wiring harness for power and speaker level input (300mm)
1x 15A Fuse
Retail:
€ 249,50
Underseat Subwoofer
Ultra-Compact, Super Bass, Powerful
JBL BassPro LITE delivers deep bass and takes up ultra-compact space.
JBL’s smallest powered subwoofer can be hid in the most compact of locations and deliver exceptional performance to any car audio system. Powered by a 100Watts Amplifier, BassPro LITE delivers accurate, tight bass you would expect from JBL, all while running cool and drawing minimal current from your vehicles charging system.
Features
Big Bass,ultra-compact space
Upgrade easier, Connected in series
Intelligent Electronic Design for Reliable and Extraordinary Performance
Die-Casting Aluminum Enclosure Design
Bass boost Volume Control
Features and Benefits
Big Bass,ultra-compact space
JBL BassPro LITE delivers deep bass and takes up ultra-compact space. Its onboard 100Wrms amplifier has been performance matched to subwoofer to deliver tight, accurate bass.
Upgrade easier, Connected in series
JBL BassPro LITE can be connected in series for user upgrade to purchase 2 set devices. The secondary BassPro LITE is still adjusted by them-self without extra Power / Single complex wires
Intelligent Electronic Design for Reliable and Extraordinary Performance
The BassPro LITE employs high-pass filters and limiters that deliver exceptional at-the-limits performance.
Die-Casting Aluminum Enclosure Design
The all-die-cast aluminum enclosure design is not only Ultra-compact size, but the ALL IN ONE is combined elegant JBL industry design element and powerful acoustic performance.
Bass boost Volume Control
Bass boost Volume control is intergraded on I/O panel to let you adjust the sound freely
Technical Specifications
Driver Complement: super powerful 7”(178mm) Subwoofer
Amplifier Power: Class D, 100Wrms; 200W Max
Frequency Response: 30Hz – 150Hz
Fuse: 15A
Maximum Current Draw: 15 A
Quiescent Current Draw: Input Sensitivity: 0.18 V – 5.0 V Low-
Level Input; 0.75 V – 20V High-Level Input
Crossover Frequency: 50 Hz – 150 Hz
Crossover Slope: 12 dB/octave
Bass Boost: 0dB to + 12dB @ 50Hz
Dimensions (L x W x H): 10-1/4” x 8” x 2-9/16” (259.6mm x 203.1mm x 65.5mm)
Weight: 8 lbs (3.5kg)
What’s in the box
1x Under seat subwoofer
4x Screws
2x Wiring harness for power and speaker level input (300mm)
1x 15A Fuse
Retail:
€ 499,00
FREE JBL PartyBox 710 SPEAKER
8x Club 194T
8x Club 34F
8x Club 44F
8x Club 54F
8x Club 64FSL
8x Club 64
8x Club 64SQ
8x Club 64C
8x Club 64CTP
8x Club 64CSQ
8x Club 644F
8x Club 864F
8x Club 964M
Retail:
€ 12.424,00
FREE JBL Encore SPEAKER
4x Club 194T
4x Club 34F
4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
4x Club 644F
4x Club 864F
4x Club 964M
Retail:
€ 3.780,00
FREE JBL PartyBox 310 SPEAKER
4x Club 194T
4x Club 34F
4x Club 44F
4x Club 54F
4x Club 64FSL
4x Club 64
4x Club 64SQ
4x Club 64C
4x Club 64CTP
4x Club 64CSQ
4x Club 644F
4x Club 864F
4x Club 964M
Retail:
€ 6.212,00
FREE JBL Charge SPEAKER
4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
2x Club 194T
2x Club 34F
2x Club 644F
2x Club 864F
2x Club 964M
Retail:
€ 2.786,00
FREE JBL FLIP SPEAKER
4x Club 44F
4x Club 54F
4x Club 64
4x Club 64CTP
Retail:
€ 1.832,00
FREE JBL WIND3S SPEAKER
4x Club 44F
4x Club 54F
4x Club 64
Retail:
€ 1.154,00
4”x 6” (100mm x 152mm) Two-Way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 644F (4”x 6” (100mm x 152mm) Two-Way Car Speaker)
Power Handling: 40W RMS, 120W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 89,50
3/4” (19mm) Edge-Driven Dome Tweeter
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 194T (3/4” (19mm) Edge-Driven Dome Tweeter)
Power Handling: 50W RMS, 150W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 3kHz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 69,50
6”x9” (152mm x 230mm) Three-way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 964M (6”x9” (152mm x 230mm) Three-way Car Speaker)
Power Handling: 85W RMS, 255W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 50Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 139,50
6”x8” (152mm x 203mm) Two-way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 864F (6”x8” (152mm x 203mm) Two-way Car Speaker)
Power Handling: 60W RMS, 180W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 65Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 99,00
6-1/2” (160mm) 2-way Component Speaker System
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.
Retail:
€ 219,50
Shallow-Mount 6-1/2” (160mm) Two-Way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64FSL (Shallow-Mount 6-1/2” (160mm) Two-Way Car Speaker)
Power Handling: 55W RMS, 165W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 89,50
6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64C & Club 64CTP (6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod)
Power Handling: 70W RMS, 210W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 169,50
6-1/2” (160mm) 2-way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Carbon Fiber Woofer with Plus One™ Architecture for Ultimate Sound Quality
(Club 64SQ, 64CSQ)
Patented (US patent #7,548,631) Plus One™ cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
(Club 64SQ, 64CSQ)
Club SQ speakers have edge-driven silk dome tweeter, which delivers a
broader and smoother high frequency response, never-harsh regardless of
output level than more commonly used w-domes.
Adjustable Tweeter Output Level
(Club 64SQ, 64CSQ)
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for Higher Sensitivity
(Club 64SQ, 64CSQ)
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish™ Tweeter Mounting Adapter
(Club 64CSQ)
The Club 64CSQ component Speaker system come with the Starfish™ tweeter
mounting adapter. The Starfish tweeter mounting adapter allows for easy
installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
(Club 64CSQ)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and
a 1” mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing
the whole assembly.
Retail:
€ 139,50
6-1/2” (160mm) Two-way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64 (6-1/2” (160mm) Two-way Car Speaker, Engineered For Better Sound Performance)
Power Handling: 60W RMS, 180W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 48Hz – 21kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 109,50
6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 64C & Club 64CTP (6-1/2” (160mm) Two-Way Component Speaker System with Tweeter Pod)
Power Handling: 70W RMS, 210W peak
Sensitivity (@ 2.83V): 92dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 159,50
5-1/4” (130mm) Two-Way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 54F (5-1/4” (130mm) Two-Way Car Speaker)
Power Handling: 45W RMS, 135W peak
Sensitivity (@ 2.83V): 91dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 99,50
4” (100mm) Two-Way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 44F (4” (100mm) Two-Way Car Speaker)
Power Handling: 35W RMS, 105W peak
Sensitivity (@ 2.83V): 90dB
Frequency Response: 75Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 89,50
3-1/2” (87mm) Two-Way Car Speaker
Pro Car Audio by JBL
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Features and Benefits
Plus One™ Woofer Cone Architecture
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased low-frequency output and greater musical character.
Edge-driven Silk Dome Tweeter
(Club 44F, 54F, 64, 864F, 964M)
The Club 44F, Club 54F, Club 64, Club 864F, Club 964M feature a full, edge-driven silk dome tweeter, which delivers a broader and smoother high frequency response, never-harsh regardless of output level than more commonly used w-domes.
Specified Shallow Design for More Mounting Application
(Club 64FSL)
Club 64FSL specified compact design for 6-1/2”that allows them to fit in just about any vehicle on the road today. That means signature JBL sound in more vehicles.
Adjustable Tweeter Output Level
(Club 64, 64C, 64CTP)
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Acoustically Damped, UV-resistant Polypropylene Cone
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling
(Club 34F, 44F, 54F, 64FSL, 64, 64C, 64CTP, 644F, 864F, 964M)
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Special Tweeter Pod Design for Acoustic Adjustment on Different Listening Position
(Club 64CTP)
The Club 64CTP Component Speaker system not only including the Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit but also offering the new installation possibility-Tweeter Pod. It is easy to install, more importantly, the tweeter pod can adjust the angle by up and down even after mounting, which allow you to control the acoustic performance on different listening position.
Starfish™ Tweeter Mounting Adapter
(Club 64C, 64CTP, 194T)
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
I-Mount Tweeter Mounting Kit
(Club 64C, 64CTP, 194T)
The I-Mount™ (patent no. 5,859,917) tweeter-mounting system allows easy and versatile installation of tweeters in each of the component systems. It includes a flush cup and surface-mount mounting hardware. With a 1-3/4” cutout and a 1”” mounting depth, installation becomes a snap. This allows the tweeter to be flush-mounted and can be angled up to ±40 degrees. Locknuts are included to keep everything in place, and the tweeter can be replaced without removing the whole assembly.
Club 34F (3-1/2” (87mm) Two-Way Car Speaker)
Power Handling: 25W RMS, 75W peak
Sensitivity (@2.83V): 89dB
Frequency Response: 90Hz – 20kHz
Nominal Impedance: 3.0 ohms
Retail:
€ 79,50
CONCERT A704
STAGE1 621
STAGE1 9631
Retail:
€ 199,00
CONCERT A652
STAGE1 601c
Retail:
€ 159,00
1 x
CONCERT A704
2 x
STAGE1 621
Retail:
€ 199,00
CONCERT A652
STAGE1 621
Retail:
€ 149,00
Stage1 9631
Stage 122
Ne1212.2
Cke10
SI-E2Y Y-Adapter
Retail:
€ 299,00
Concert a652
Stage82
Ne0808.1
Cke10
Retail:
€ 199,00
Concert a652
Stage102
Ne1010.2
Cke10
Retail:
€ 219,00
Concert a652
Stage122
Ne1212.2
Cke10
Retail:
€ 239,00
110 x Stage141f + 10 free
110 x Stage151f + 10 free
110 x Stage161f + 10 free
110 x Stage19631 + 10 free
Buy 110 each - 440 sets total
Get 10 each for free (8,33% discount)
Retail:
€ 0,00
5 ¼” (130mm) 2-way
Power Handling: 45W RMS, 135W PEAK
Sensitivity (@2.83v): 91dB
Frequency Response: 75Hz-20kHz
Impedance: 3ohms
Key Features:
Plus OneTM Woofer Cone
Vented Basket Frame Design
Edge-Driven Dome Tweeter
Retail:
€ 89,50
Woofer + Amp
JBL S2-1224SS
Share on:
12" (30cm) Subwoofer Box
Series II subwoofer box offers improved efficiency and higher output than a vented subwoofer box without the distracting noise or "chugging" generated by a port. The patented Slipstream port significantly reduces port noise at high sound pressure levels by minimizing airflow turbulence. Series II subwoofer box, with high-roll surrounds, patented cone design and long-excursion, delivers deep, powerful bass with greater accuracy than conventional bass reflex boxes. And the exclusive SSI™ (Smart Selectable Impedance) switch lets you choose between 2- or 4-ohm impedance for maximum configuration flexibility. It's everything you're looking for in a compact, easy-to-install subwoofer box.
+
JBL Stage A3001
Share on:
1 Channel Mono Amplifier
600 watts
Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they'll make a transducer sit up and sing.
Operating voltage 9 – 16V
RMS power @ 4 ohms N/A
RMS power @ 2 ohms 300W
RMS bridged power @ 4 ohms N/A
Total peak power 600W
Frequency response 10Hz – 320Hz @ -3dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2x15A
Dimensions (H x W x L) 50 x 145 x 241.6mm
Weight 1,609 kg
Retail:
€ 449,00
10 X WIND3S
2 X BASSPRO GO + HOME CHARGER
Retail:
€ 1.997,50
4 X STAGE 624
4 X STAGE2 524
4 X STAGE2 424
4 X STAGE1 601C
4 X STAGE1 621
4 X STAGE3 427
2 X STAGE3 6427
4 X STAGE3 527
4 X STAGE3 627
2 X STAGE3 607C
2 X STAGE3 8627
2 X STAGE3 9637
2 X CLUB322
2 X CLUB422
2 X CLUB522
2 X CLUB622
2 X CLUB602CTP
1 X STADIUM 62
1 X STADIUM 52
1 X STADIUM 62CF
1 X STADIUM 52CF
2 X STAGE-A3001
2 X CONCERT A652
2 X CONCERT A704
1 X CLUB-A5505
1 X CLUB-A754
1 X CLUB-A1000
1 X CLUB-A600
1 X S2-1224SS
1 X STAGE 122
1 X STAGE 102
1 X STAGE 82
1 X CLUB1224
1 X STADIUM1224
1 X NANO
1 X SL2
1 X FUSE PACK (FUSE + 3001 + WIRES )
1 X HUB
1 X BP12
1 X PB8
1 X BASSPRO GO
Retail:
€ 10.250,00
1 X STAGE-A3001
1 X CONCERT A652
1 X CONCERT A704
3 X FREE WIREKIT
Retail:
€ 478,50
1 X NANO
1 X SL2
1 X FUSE PACK (FUSE + 3001 + WIRES)
1 X HUB
1 X BP12
1 X PB8
1 X BASSPRO GO
6 X WIREKIT FOR FREE
Retail:
€ 2.643,00
4 X STAGE 624
4 X STAGE2 524
4 X STAGE2 424
4 X STAGE1 601C
4 X STAGE1 621
4 X STAGE3 427
2 X STAGE3 6427
4 X STAGE3 527
4 X STAGE3 627
2 X STAGE3 607C
2 X STAGE3 8627
2 X STAGE3 9637
2 X CLUB322
2 X CLUB422
2 X CLUB522
2 X CLUB622
2 X CLUB602CTP
1 X STADIUM 62F
1 X STADIUM 52F
1 X STADIUM 62CF
1 X STADIUM 52CF
2 X STAGE-A3001
2 X CONCERT A652
2 X CONCERT A704
1 X CLUB-A5505
1 X CLUB-A754
1 X CLUB-A1000
1 X CLUB-A600
1 X S2-1224SS
1 X STAGE 122
1 X STAGE 102
1 X STAGE 82
1 X CLUB1224
1 X STADIUM1224
Retail:
€ 7.607,00
4 X STAGE 624
4 X STAGE2 524
4 X STAGE2 424
4 X STAGE1 601C
4 X STAGE1 621
4 X STAGE3 427
2 X STAGE3 6427
4 X STAGE3 527
4 X STAGE3 627
2 X STAGE3 607C
2 X STAGE3 8627
2 X STAGE3 9637
2 X CLUB322
2 X CLUB422
2 X CLUB522
2 X CLUB622
2 X CLUB602CTP
1 X STADIUM 62
1 X STADIUM 52
1 X STADIUM 62CF
1 X STADIUM 52CF
Retail:
€ 4.545,00
2 X STADIUM 62F
2 X STADIUM 52F
2 X STADIUM 62CF
2 X STADIUM 52CF
1 X STADIUM 962C
Retail:
€ 2.815,50
4 X CLUB322F
8 X CLUB422F
8 X CLUB522F
8 X CLUB622F
4 X CLUB602CTP
4 X CLUB9632
4 X CLUB8622F
4 X CLUB6422F
2 X CLUB-A754
2 X CLUB-A5055
2 X CLUB-A600
2 X CLUB-A1000
2 X CLUB1024
2 X CLUB1224
2 X S2-1224SS
Retail:
€ 7.251,00
4 X CLUB322F
8 X CLUB422F
8 X CLUB522F
8 X CLUB622F
4 X CLUB602CTP
4 X CLUB9632
4 X CLUB8622F
4 X CLUB6422F
Retail:
€ 3.778,00
2 X CLUB322F
4 X CLUB422F
4 X CLUB522F
4 X CLUB622F
4 X CLUB602CTP
2 X CLUB 9632
2 X CLUB 8622F
2 X CLUB 6422F
Retail:
€ 2.188,00
2 X 422F
2 X 522F
4 X 622F
2 X 602CTP
Retail:
€ 955,00
2 X 422F
2 X 522F
2 X 622F
Retail:
€ 477,00
4 X STAGE1 601C
4 X STAGE1 61F
4 X STAGE1 51F
4 X STAGE1 41F
4 X STAGE2 624
4 X STAGE2 524
4 X STAGE2 424
4 X STAGE2 604C
4 X STAGE2 9634
2 X CONCERT-A652
2 X CONCERT-A704
2 X STAGE-A3001
2 X STAGE82
2 X STAGE102
2 X STAGE122
2 X STAGE122D
2 X STAGE1200S
Retail:
€ 4.086,90
4 X STAGE1 601C
4 X STAGE1 61F
4 X STAGE1 51F
4 X STAGE1 41F
4 X STAGE2 624
4 X STAGE2 524
4 X STAGE2 424
4 X STAGE2 604C
4 X STAGE2 9634
Retail:
€ 1.974,00
2 X STAGE2 424
2 X STAGE2 524
2 X STAGE2 624
2 X STAGE2 604C
2 X STAGE2 9634
Retail:
€ 591,00
4 X STAGE1 61F
4 X STAGE1 51F
4 X STAGE1 41F
Retail:
€ 474,00
8 X STAGE1 621
8 X STAGE1 601C
Retail:
€ 952,00
The product has been added to the shopping cart
(x)