Go to all products

Products per page: 10 | 20 | 50 | 100 | All

Vibe PULSE4-V0

4" Luidsprekerset 120 Watt

The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.

4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

Retail: € 35,99

Vibe CBR 12 BASS PACK

Monoblock Amplifier & Bass Enclosure

Monoblock Amplifier
“The world’s most powerful active amplifier with five
times more power than traditional active amplifiers.”

• The 400.1M is exactly the same width as a US $1 bill.
• Ultra compact size allows the amplifier to be hidden easily in
an OEM install.
• Optional ISO connection allows a direct inline connection to
factory source units.
• Perfect for OEM integration and aftermarket applications with
high level input and auto sense.
• Low pass crossover filter and bass boost.

Model POWERBOX400.1M-V7
Configuration Monoblock
Dimensions (H x W x D) 1.5” x 6.2” x 3.2”
(37mm x 157mm x 82mm)
RMS @ 4Ω Mono 170 watts
RMS @ 2Ω Mono 250 watts
RMS @ 1Ω Mono 400 watts
Maximum Power 800 watts
Frequency Response 10Hz - 500Hz
Crossover Type LP / Subsonic
Crossover Range 30Hz - 150Hz
Topology Micro Class D

=========================

Bass Enclosure
“The PULSE CBR12 is quire simply the best bang for
the buck on the market”

• 4th Order bass reflex enclosure.
• Ported enclosure delivers higher SPL and boosted bass
response.
• Flared turbo port reduces distprtion and smooths airflow.
• Compatible with rapid fit kit for fast and easy installation
without needing to directly connect to the vehicles battery

Model PULSECBR12-V7
Driver PULSE 12
Type Passive bass enclosure
Peak/RMS Power 900W/300W
Impedance 2Ω
Dimensions (H x W x D)
13.9” x 21.6” x 16.7”
(354mm x 550mm x 425mm)
Configuration 4th order bass reflex
Enclosure Type Trapezius Bass Enclosure
Recommended Amplifier POWERBOX400.1M

Retail: € 399,00

Vibe POWERBOX5000.1P-V0

Amplifier - Monoblock - 10400W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high


Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 10.4” x 9.2” (66 x 265 x 233mm)

RMS @ 4Ω 1900 watts

RMS @ 2Ω 3300watts

RMS @ 1Ω 5200 watts

Maximum Power 10400 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 559,99

Vibe POWERBOX3000.1P-V2

AMPLIFIER - MONO - 6600W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high


Model POWERBOX3000.1P-V0

Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 7.3” x 9.2” (66 x 185 x 233mm)

RMS @ 4Ω 1100 watts

RMS @ 2Ω 2050watts

RMS @ 1Ω 3300 watts

Maximum Power 6600 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 379,99

Vibe POWERBOX1500.1P-V0

AMPLIFIER - 3000W

The new Powerbox Pro amplifiers were created from the need to have a perfect range of amplifier to power our range of Pro audio speakers and also any subwoofers in the VIBE range.

The amps use Full Bridge technology which was invented in Japan decades ago but adopted and used in abundance in Brazil over the last 10 years for their monster party and sound clash style creations.

This Full Bridge technology is even more efficient than traditional Class D we are able to shrink the amps footprint even further giving massive power in a tiny footprint.

All 3 models come in mono application with Full range frequency output, Yes Full range! This means these amps can be used to drive any type of driver whether that is mid low or high




Configuration Full range Monoblock

Dimensions (H x W x D) 2.6” x 7.3” x 9.2” (66 x 185 x 233mm)

RMS @ 4Ω 400 watts

RMS @ 2Ω 650 watts

RMS @ 1Ω 1500 watts

Maximum Power 3000 watts

Frequency Response 15Hz – 50kHz

Crossover Type LP / HP / Flat

Crossover Range 15Hz – 80Hz

Topology Full Range Class D

Built in active crossovers
Bass boost circuit
Ultra efficient Class D topology
Wideband frequency up to 20kHz
Full bridge technology
Compact footprint

Retail: € 279,99

Vibe BLACKAIR15D2-V7

15 INCH - 300W - WOOFER

For those who want sound quality to be loud. The new Blackair subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. 10, 12 and 15″ variants offer a solution for everyone with power ranging from 600w to 1000w RMS. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, these subwoofers offer beautiful bass but with the aggression of the larger competition subwoofers.

3000w Peak
1000w RMS
Sensitivity: 89 dB
Impedance dual 2 ohm
Frequency response: 20Hz – 850Hz
3″ 4 layer voice coil
Mounting depth: 8.7″” (220mm), mounting diameter: 13.8″ (350mm)
Enclosure volume: 2 – 4 cubic feet

Retail: € 299,00

Vibe BLACKAIR10D2-V7

10 INCH WOOFER - 1800W

The Black Air 10 inch Dual 2Ω Subwoofer is for those who want sound quality to be loud. The new Black Air subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, the Black Air 10 inch Dual 2Ω Subwoofer offers beautiful bass but with the aggression of the larger competition subwoofers.

Available in: 10, 12 and 15″ variants that offer a solution for everyone with power ranging from 600w to 1000w RMS.

1800w Peak, 600w RMS
Sensitivity: 85 dB
Impedance dual 2 ohm
Frequency response: 30Hz – 1 kHz
2.5″ 4 layer voice coil
Mounting depth: 6.3″ (160mm), mounting diameter: 9.3″ (235mm)
Enclosure volume: 1 – 2 cubic feet

Retail: € 229,00

Vibe PULSECBR12A-V0 Active

Active 12" Subwoofer 900W

12″ High Output Bass Enclosure Enclosure
Actively Powered with 400 watts
VIBE Turbo port

The new Vibe Pulse CBR Active is the best bang for buck enclosure we have every built.

With a massive 4 inch Turbo port and power wedge enclosure paired with a powerful Dual voice coil subwoofer the enclosure design offers serious bass.

The 2020 CBR offers a market leading amplifier solution in our revolutionary terminal amplifier, taking all the technology from our best ever selling amp the POWERBOX400.1 and adapting it into our Terminal amp becoming the most powerful active amplifier solution in the world!.

Keeping all the functions and even easier to install! Low and High level input, gain level control and option for a bass remote!

All compatible with our Rapid Fit wiring kit.

900w Peak
300w RMS
Impedance 4 ohm
13.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
170w @ 4 ohm
800w Peak
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
Optional ISO connection kit
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier

Retail: € 299,99

Vibe BLACKAIRPRO6M-V0

6,5" Speaker set 480W

Model: BLACKAIRPRO6M-V0
6.5″ Pro Speaker
Non pressed paper cone
Dual roll foam surround
Unique Rubber gasket
Polycotton spiders
Unique baloney cut Phase Plug
High Efficiency

The VIBE BlackAir range has always been about sound quality paired with volume commonly known as SQL and the new range of Pro audio drivers are no exception.

Aimed squarely at the SQL competition scene, these all-new Pro audio drivers deliver huge volume with all the quality you’ve come to expect from VIBE. This is a pairing of HIFI sound quality with Pro audio volume – The best of both worlds!

We’ve added a high efficiency 8″ and 6.5” midrange driver and married it to an oversized 4.5” Titanium bullet tweeter to deliver best in class performance.

• Non pressed paper cone
• Dual roll foam surround
• 38mm voice coil
• Polycotton spiders
• Spade terminal for easy connection
• Rubber gasket

Model – BLACKAIRPRO6M-V0
Type – Pro audio midrange
Configuration – 1-way
Speaker Size – 6.5” (165mm)
RMS Power – 160W
Peak – 480W
Sensitivity – 98dB
Frequency Response – 80Hz – 10.5kHz
Impedance – 4Ω
Mounting Depth – 2.7” (69mm)
Mounting Diameter – 5.6” (141mm)
Grille Included – No
Recommended Amp – POWERBOX150.4M-V0

Retail: € 79,99

Vibe CVEN63C-V4

6.5" Speaker set 3-way 290W

3 Way high end speaker
Separate Crossover
Designed and Engineered in the UK

High level sound quality 3 way component speaker set

The CVEN 6 has a wide and flat frequency response, enabling it to be common to both a two way and three way component kit. The midwoofer is designed to overcome the inherent problems of every loudspeaker design: distortion, power handling, dynamic response and efficiency.

Model CVEN63C-V4
Type Component
Configuration 3-way
Speaker Size 6.5” (165mm)
RMS Power 130 watts
Peak Power 290 watts
Minimum Input (RMS) 65 watts
Sensitivity 91dB
Frequency Response 45Hz – 20kHz
Impedance 4Ω
Mounting Depth 2.9” (73mm)
Mounting Diameter 5.6 ” (143mm)
Recommended Amp CVENC6-V4

Retail: € 699,00

NEED HELP?

WhatsApp Call me back