Bekijk alle producten

Producten per pagina: 10 | 20 | 50 | 100 | Alle

PIONEER DEQ-S1000A2

Makkelijk te installeren en weg te bergen universele soundprocessor. DEQ-S1000A2 is ontworpen om het geluid van uw originele standaard autostereo en luidsprekers te verbeteren. Maakt verbinding met Apple iOS & Android-toestellen en maakt gebruik van de Pioneer Sound Tune-app voor instellingen en audiofuncties van hoge kwaliteit.

Universele soundprocessor.
De DEQ-S1000A2 is de universele soundprocessor van Pioneer, die ontworpen is om de geluidskwaliteit van uw standaard autostereo en luidsprekers te verbeteren. Aangezien de standaard geďnstalleerde autostereo niet moet worden vervangen, is het installeren* makkelijk. Door zijn compacte afmetingen kan deze uit het zicht worden geplaatst, wat zorgt voor een nettere installatie.

De DEQ-S1000A2 is voorzien van de op maat gemaakte Pioneer high performance 48-bit dual-core DSP voor geluidsweergave van hoge kwaliteit. Een interne klok en schema zijn optimaal afgeregeld. Daardoor wordt slechte geluidskwaliteit door jitter volledig uitgesloten.

Wanneer deze wordt gebruikt in combinatie met de Pioneer Sound Tune-app, kunt u hoogwaardige audiokwaliteit uit de standaard luidsprekers krijgen. Alle handelingen kunnen gemakkelijk worden uitgevoerd via een compatibele smartphone en er zijn talloze instellingen beschikbaar, van live simulatie-instellingen tot 31-bands speciale equalizerinstellingen via de Sound Tune-app.

De DEQ-S1000A2 biedt eenvoudigere connectiviteit dankzij de meegeleverde ISO T-Harness- en OTG-kabels voor gebruikers van een Android-smartphone.

(*Optionele voertuigspecifieke kabels kunnen nodig zijn; afzonderlijk verkrijgbaar).

Advies: € 169,00

JBL Club A754

4 x 100
Watts RMS

High performance 4 channel car amplifier

Value engineered car amplifier with JBL power and performance.
The Club A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your car. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.

Features
Compact size
High and low level input
Variable crossover
Low noise and distortion
Input Level Control
Full on-board protection
Preamp Outputs
Class H amp technology
Turn-on mode

Advies: € 229,00

JBL Club A600

MONO
600 WATTS RMS

Value engineered car amplifier with JBL power and performance.
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

Features
Compact size
High and low level input
Variable crossover and bass boost
Low noise and distortion
Input Level Control
Full on-board protection
Phase Switch
RBC wired remote

Advies: € 199,00

JBL Club A5055

5-Channel
Amplifier

Value engineered car amplifier with JBL power and performance.
The Club A5055 5-channel amplifier delivers a powerful 50-Watts RMS to each of the front and rear speakers in your car, and a pounding 500-Watts RMS to the subwoofer channel — a much smarter ratio of subwoofer-to-full-range power than what is typical in 5-channel amps. You can also bridge the amp to 3-channel mode to deliver 140-Watts RMS to your front speakers while driving your sub with 500-Watts RMS. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance.

Features
Compact size
High and low level input
Variable crossover and bass boost
Low noise and distortion
Input Level Control
Full on-board protection
Phase Switch
RBC wired remote
Class AB+D amp technology
Turn-on mode

Advies: € 299,00

JBL Club A1KW

1 Channel Mono Amplifier
1000 Watts 

Power you will feel at your core.JBL’s new Club 1KW Amplifier is a 1000 watt subwoofer powerhouse that delivers a flawless performance and will shake your soul. Leveraging an ultra-efficient Class D topology all this horsepower is delivered while drawing less current and staying cool. It comes equipped with an onboard 2nd order low-pass crossover as well as a variable Bass EQ (0-9 dB at 45Hz). An included wired remote bass level control can be mounted for convenient volume adjustment from the driver’s seat. Get ready to show and shine, but don’t scare the neighbors.

Technical Specifications:
Power Output @ 2 ohms: 1000W @ 2 ohms
Power Output @ 4 ohms: falls out of 2 ohms
THD @ ROP: 1.0%
S/N: 75dB at 1W
Frequency Response: 10 – 320Hz ± 3dB
Input Sensitivity:
Low Level Input: 0.2 – 2V
High Level Input: 1 – 10V
HPF: n/a
LPF: 32 – 320 (12dB/oct)
Bass EQ: 0 – 12dB var @ 45Hz
Protection: DC, OTP, UVP, OVP, OCP

Advies: € 329,00

JBL Stage A9004

4 Channel Amplifier
880 Watts

Power you will feel at your core.JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms 90W
RMS power @ 2 ohms 110W
RMS bridged power @ 4 ohms 220WTotal peak power 880W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2 x 20A
Dimensions (H x W x L) 50 x 145 x 268.6mm
Weight 1.806kg

Advies: € 149,00

PIONEER GM-DX874

4/3/2 Channels
Versterker

4-Channel high resolution Class-FD Amplifier 1200W, High quality sound components

Advies: € 259,00

JBL Stage A6004

4 Channel Amplifier
560 Watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 560W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio(reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.2A
Fuse size 2 x 15A
Dimensions (H x W x L) 50 x 145 x 193.6mm
Weight 1.381kg

Advies: € 129,00

JBL Stage A6002

2 Channel amplifier
280 Watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 280W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio(reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.0A
Fuse size 20A
Dimensions (H x W x L) 50 x 145 x 156.6mm
Weight 1.16kg

Advies: € 99,99

JBL Stage A3001

1 Channel Mono Amplifier
600 Watts

Power you will feel at your core. JBL Stage Amps are available in a variety of configurations, delivering the right power and number of channels for full-range and subwoofer applications. For more than four decades, JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease and exhilaration. These compact amps are equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly reliable – and once they turn on, they’ll make a transducer sit up and sing.

Operating voltage 9 – 16V
RMS power @ 4 ohms N/A
RMS power @ 2 ohms 300W
RMS bridged power @ 4 ohms N/A
Total peak power 600W
Frequency response 10Hz – 320kHz @ -3dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2 x 15A
Dimensions (H x W x L) 50 x 145 x 241.6mm
Weight 1.609kg

Advies: € 129,00

HULP NODIG?

WhatsApp Bel mij terug